cpi
|
3cx5000a7
cpi | 4cW50,000J
3cx5000a7
The 3CX5000A7 high-mu triode is designed for use
as a cathode driven Class AB power amplifier. The
tube does not require a socket as it is designed to
bolt directly to the chassis by means of the grid
flange. Cathode and heater connections are made
by bolting directly to the amplifier circuitry. These
features reduce equipment cost and complexity
chaRacteRistics
Plate Dissipation (Max.)
Screen Dissipation (Max.)
Grid Dissipation (Max.)
Frequency for Max. rating (CW)
Amplification Factor
Filament/Cathode
Voltage
Current
Capacitance
Input
Output
Feedthrough
Capacitance
Input
Output
Feedthrough
Cooling
Base
Air Socket
Air Chimney
Boiler
Length
Diameter
Weight
5,000 Watts
---
35 Watts
110 MHz
---
Oxide Coated
10.0 Volts
17.5 Amps
Grounded Grid
56.5 pf
34.0 pf
0.2 pf
---
--- pf
--- pf
--- pf
Forced Air
Direct Chassis
Mounting
---
SK-306
---
8.25 in; 20.96 cm
4.94 in; 12.55 mm
9.5 lb ; 4.3 kg
type of service
MaxiMuM Ratings
plate
Voltage
(Volts)
6,500
plate
current
(amps)
1.5
ypical OpeRatiOn
t
plate
current
(amps)
1.44
Drive
Output
power power
(Watts) (kiloWatts)
155
5.0
class of
Operation
aB
plate
screen
Voltage Voltage
(Volts)
(Volts)
6,500
---
cathode driven RF linear amplifier
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic
information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For information on
this and other CPI products, visit our website at: www.cpii.com,
or contact: CPI MPP Division, Eimac Operations, 607 Hansen Way, Palo Alto, CA 94303
telephone
:
1(800) 414-8823.
fax
:
(650) 592-9988 |
email
:
powergrid@cpii.com