Vectron International's TRU-050 module is a user-configured, phase-locked loop (PLL) solution designed to simplify a wide variety of clock recovery and data retiming,
frequency translation and clock smoothing applications. The device features a phase-lock loop ASIC with a quartz stabilized VCXO for superior stability and jitter performance.
This highly integrated module provides unsurpassed performance, reliability and quality. The proprietary ASIC device includes a refined Phase Detector, a Loop Filter Op-Amp,
a Loss of Signal Alarm with Clock Return to Nominal feature, a VCXO circuit, and an optional 2n divided output.
The ASIC and quartz resonator are housed in a hermetic 16-pin DIL ceramic package with optional thru-hole or surface mount leads. The VCXO frequency (OUT1) and
division factor (OUT2) are factory set in accordance with customer specifications. PLL response is optimized for each application by the selection of three external passive
components. Software is available from Vectron to aid in loop filter component selection and loop response modeling.
is a user-configured phase-locked loop (PLL) integrated circuit. It includes a voltage controlled crystal oscillator (VCXO), an operational amplifier, a phase
detector, and additional integrated functions for use in digital synchronization applications. These applications include timing recovery and data pulse restoration for data
signals, clock frequency translation and smoothing, synchronous distributed clock networks, and clock frequency synthesis.
What is the output of the
phase detector?
The TRU-050 phase detector output
is a DC signal, under locked
conditions, and is nominally 2.5
Volts. The phase error (which is
typically a pulse for digital phase
detectors) is converted to a DC
level, making it easy to design
the loop filter.
TRU-050 Elements
Figure 4.
How long does the
TRU-050 take to detect
a loss of signal?
If there are no transitions on
DATAIN for a period of 256 clock
cycles, LOS is set to a logic 1.
LOS is reset to logic 0 as soon as
there are DATAIN transitions.
Phase Dete c t o r
The phase detector is designed to accept an NRZ data stream at DATAIN (Pin 7- refer to figure 5), but may be used
for clock signals and other data types. The input buffers are designed to switch at a TTL switching threshold of 1.4 V.
The phase detector’s inputs are:
• DATAIN (Pin 7) - the input clock or NRZ data signal
• CLKIN (Pin 9) - the clock signal feedback from the VCXO output OUT1 or OUT2
And the outputs are:
• RCLK (Pin 11) - the regenerated clock signal
• RDATA (Pin 12) - the retimed data signal
• PHO (Pin 6) - the phase detector output
• LOS (Pin 10) - a loss of signal detector
The phase relationship between the regenerated clock signal, RCLK (Pin 11), and the regenerated data signal,
to align the falling edge of the RCLK signal with the center of each RDATA pulse.
For applications where the input clock or data signal, DATAIN, is very low in frequency (<200kHz), clock
information may pass through the phase detector because of its finite low pass characteristic. In applications
such as this, an additional pole may be necessary in the loop filter to attenuate these AC components prior to
the VCXO input. Please contact Vectron’s Applications Engineering staff for further detail.
How is it
manufactured?
The TRU-050 is
assembled in
Figure 6.
“state of the art”
class 100 and class
10,000 clean
rooms using leading
edge, high volume
automation equip-
ment and advanced
ASIC technology.
Figure 7.
Figure 8.
Phase Detector Gain Calculation
The schematic diagram (figure 7) shows a simplified representation of the phase detector's basic error generation function. The actual circuit is more complex and includes
circuitry to reduce the
TRU-050's
dependence on input data duty-cycle. In general, the
TRU-050
is insensitive to duty cycle and duty cycle changes. This circuit provides a
output (V D) DC level which is proportional to the relative phase of DATAIN (Pin 7) and CLKIN (Pin 9). A plot of the output (VD) versus relative phase is shown in figure
8. The slope of the output (VD ) versus relative phase (0 e) is 5V/2π.
The phase detector block also includes an output gain stage which should be considered when calculating the gain of the complete phase detector block. This gain stage
has a gain of 2/3, and converts the differential signal to a single-ended DC output.
[i=s] This post was last edited by Beifang on 2018-6-12 14:14 [/i] 1. The antenna of LPC8N04 is suitable for the NFC Forum Type 2 specification ISO/IEC 14443A. This antenna design is suitable for NXP'...
[i=s]This post was last edited by alan000345 on 2019-3-29 08:32[/i] [align=left][align=center][/align][/align][align=left][color=rgb(63, 63, 63)][font=-apple-system-font, BlinkMacSystemFont, "][size=1...
The default in CE is 64M. After setting IMGRAM128=1, there is no problem supporting 128M. However, after setting IMGRAM256=1, I cannot enter the system. So I would like to ask how to add support for 2...
Start your design with the industry's first single-chip microcontroller unit (MCU) with built-in Wi-Fi connectivity. The SimpleLink CC3200 device for Internet of Things (IoT) applications is a wireles...
Today I searched on Taobao and saw that the XDS100V2 emulator with isolation is only 49.88 yuan. Is it reliable? I feel that the cost is more than that!...
The digital-analog design industry should avoid copying experience and rules, but to thoroughly explain this problem, we must first understand the mechanism of digital-analog interference. The impact ...
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
As a wireless broadband metropolitan area network standard, WiMAX technology has greater advantages than previous 3.5GHz MMDS products in terms of non-line-of-sight transmission and spectrum utiliz...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
This article discusses how to wake up a touch-sensitive device such as a tablet without touching the device, using basic gesture recognition and novel proximity sensors. The article discusses the p...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
Aromatic gases are widely present in food, medicine, cosmetics and various daily chemical products, such as snacks, liquor, spices, Chinese herbal medicines, plasters, perfumes, soaps, shampoos, et...[Details]
Printed circuit boards ( PCBs
)
are used in most electrical products
. If a PCB has low
insulation resistance
(IR), the performance of the circuits on the PCB will be greatly reduced...[Details]
Abstract: Aiming at the needs of coal-rock acoustic emission signal monitoring system, a data acquisition circuit with 24-bit resolution and 16-channel synchronous data acquisition function is desi...[Details]
The serial interface real-time clock chip DS1302 launched by Dallas Company in the United States can trickle charge the backup battery of the clock chip. Due to the main features of the chip such a...[Details]
With the rapid development of cities and the improvement of citizens' living standards, the number of various vehicles in cities is growing, and the demand for parking spaces in major commercial an...[Details]
Temperature compensated quartz crystal oscillator (TCXO) is widely used as a high-precision frequency source in communication systems, radar navigation systems, precision measurement and control sy...[Details]
Electric bicycles have long been a means of transportation for lower-income groups due to their affordability. The largest concentrated expense in the use of electric vehicles is the cost of replac...[Details]
At present, with the diversification of portable products and the almost harsh requirements for audio and video parts, the power consumption requirements of the whole machine have been raised to a ...[Details]
It should be understood as follows: DC-DC means direct current to direct current (conversion of different DC power values). Anything that meets this definition can be called a DC-DC converter, incl...[Details]
NXP MCU
京公网安备 11010802033920号
EEWORLD
