After adding pi, the open loop transfer function is: num=[-10.3*kp (9.3*kp-10.3*ki) 2e6*kp 2e6*ki]; den=[0.264 2.64 0 0] Do I need to draw a graph or do a calculation? I see that some places draw step...
Tantalum Capacitor Introduction
The full name of tantalum capacitor is tantalum electrolytic capacitor (also called tantalum capacitor). It is a type of electrolytic capacitor. It uses metal tantalum ...
Design an amplifier using discrete components, powered by a single power supply. Specifications: Voltage gain>=40db Input resistance>=10k Output resistance<=500 —30db Bandwidth: 20HZ—20kHz Output rang...
I polled several USB fd's POLLOUT events, and the event was generated without intervals, resulting in an infinite loop with no blocking point, and the CPU usage soared. When exactly does the POLLOUT e...
Hey guys, I'm a little confused about the SWD protocol, as follows: The protocol states that the debugger sends a read AP request packet, and the target chip gives an OK response and then immediately ...
The frequency converter is a device that converts the industrial frequency power supply (50Hz or 60Hz) into AC power supply of various frequencies to realize the variable speed operation of the motor....
0 Introduction
With the development of society, people pay more and more attention to security work. Monitoring products have been used in various fields instead of being used only in importan...[Details]
1. With the development of modern industry and the continuous improvement of automation, some medium and large control systems have been greatly facilitated, which not only makes control easier, bu...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
The potentiometer is an adjustable electronic component. The main functions of the potentiometer in the circuit are as follows:
1. Used as a voltage divider
A potentiometer is a continuou...[Details]
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
Traditional
virtual instruments
consist of a data acquisition
board
based on PCI bus and
corresponding software. However, with
the rapid development of
computer
network techno...[Details]
introduction
At present, the research on micron and nanotechnology is very active, which has led to the rapid development of microtechnology and micro-mechanical electronic system (MEMS) t...[Details]
Features
POE technology can ensure the safety of existing structured cabling while ensuring the normal operation of the existing network and minimizing costs. The IEEE 802.3af standard is ...[Details]
New Automobile
Hydraulic Clutch
The hydraulic control system uses almost 100% advanced engineering plastics, which overcomes the shortcomings of the main and branch cylinders of metal clutc...[Details]
An intelligent vehicle is a robot that can automatically drive in an environment according to a pre-set mode, or it can autonomously perform specific operations according to the on-site situation. ...[Details]
1 Introduction
With the rapid development of my country's economy, the country has introduced a series of policies such as preferential policies, subsidy policies, and old-for-new policies, wh...[Details]
The 8051 microcontroller is the most common microcontroller we have. I have been using 8051 for a long time and have also taught microcontroller courses for a period of time. Here I would like to s...[Details]
1 Introduction
The early stage control system used relay control. Due to the large number of stage equipment, the number of control elements is huge and the wiring is complicated. Therefore, th...[Details]
At present, products in the field of monitoring generally focus on the field level, that is, the client/server (C/S) model is adopted, the purpose of which is to ensure the stability and reliability o...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
