The polarization beam combiner and depolarizer is a compact, high-performance
micro-optic-based depolarizing component. It normally functions as a combiner
to combine two orthogonal-polarized pump beams together and then converts
it to a depolarized beam at the output port. Depending on special customer
requirements, the isolator functionality can be integrated with the depolarizer or
remain as a stand-alone depolarizer without combining functionality.
• Telcordia GR-1221
north america
:
800 498-JDSU (5378)
worlDwiDe
:
+800 5378-JDSU
webSite
:
www.jdsu.com
polarization Beam comBiner anD Depolarizer
2
Dimensions Diagram
PBCD
IPBCD
Standalone depolarizer
All dimensions are mm.
specifications
parameter
pBcD
ipBcD
stand-alone
Depolarizer
Center wavelength, λ
C
Wavelength range, λ
S
Insertion loss
1
Wavelength-dependent loss
Degree of polarization
Isolation
Return loss
Input power
2
Operating temperature
Storage temperature
Tensile load
Dimensions (D x L)
Fiber type
Pigtail color code
Maximum
Maximum
Maximum
Minimum
Minimum
Maximum
Maximum
Maximum
1450 nm
λ
C
±30 nm
0.8 dB
0.9 dB
0.7 dB
0.15 dB
10%
N/A
20 dB
N/A
50 dB
2000 mW
–5 to 75°C
–40 to 85°C
5 N
5.5 x 58 mm
Ports 1 and 2: Panda PM fiber, port 3: SMF-28 fiber
Port 1: black, port 2: clear, port 3: clear
Note: Parameters are specified for the whole wavelength range and operating temperature range without a connector. The direction of linear polarization is aligned with the
slow axis of the PM fiber.
1. Extra loss from pump PER is excluded.
2. Maximum input power for each port is 1000 mW.
polarization Beam comBiner anD Depolarizer
ordering information
For more information on this or other products and their availability, please contact your local JDSU account manager
or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
sample: pBD-c34p10000
pBD-
code
C
I
S
code
34P
S34
XXX
Functions
Polarization beam combiner
and depolarizer
Polarization beam combiner
and depolarizer with isolator
Stand-alone depolarizer
pump Dependent
JDSU Raman pump S34+
JDSU Raman pump S34
Others. Please contact JDSU for
further ordering information.
code
1
2
code
0
1
Fiber length
1 m
2 m
Fiber Buffer type
250 µm bare fiber¹
900 µm loose tube
code
0
1
2
3
4
code
0
1
2
3
4
connector² (port 1)
No connector
FC/SPC
FC/APC
SC/SPC
SC/APC
connector² (port 2)
No connector
FC/SPC
FC/APC
SC/SPC
SC/APC
code
0
1
2
3
4
connector² (port 3)
No connector
FC/SPC
FC/APC
SC/SPC
SC/APC
1. Connector is not available on 250 µm bare fiber.
2. Insertion loss and return loss depend on connector type.
I have searched for a long time on the Internet, but none of the information is very detailed. Does anyone have a special tutorial? Please share it with me....
This depends on how the compiler allocates it.Remember that Cosmic allocates local variables to the zero page by default, without the @tiny modifier....
[color=black]For an electronic system nowadays, the design of the power supply is becoming more and more important. I would like to discuss with you some of my own experience in power supply design, s...
[i=s]This post was last edited by Blue Angel on 2021-8-18 14:08[/i]Thanks to the forum for providing me with an opportunity to disassemble the fast charger. This time I received the Xiaomi 65W fast ch...
[size=4][color=#000]1. Why are some submodules or module parameters grayed out and cannot be modified? For example, the parameter 'treat as atomic submodule' of the submodule 'Speed and direction are ...
1. With the development of modern industry and the continuous improvement of automation, some medium and large control systems have been greatly facilitated, which not only makes control easier, bu...[Details]
General LED lighting has a current limiting resistor in the driving circuit, and the power consumed by the resistor has nothing to do with the LED light emission. In order to improve efficiency, a...[Details]
The potentiometer is an adjustable electronic component. The main functions of the potentiometer in the circuit are as follows:
1. Used as a voltage divider
A potentiometer is a continuou...[Details]
Printed circuit boards ( PCBs
)
are used in most electrical products
. If a PCB has low
insulation resistance
(IR), the performance of the circuits on the PCB will be greatly reduced...[Details]
Introduction
As the country increases its efforts to control the atmospheric environment, motorcycle emission regulations will become stricter year by year, and motorcycles that do not meet the...[Details]
With the rapid development of cities and the improvement of citizens' living standards, the number of various vehicles in cities is growing, and the demand for parking spaces in major commercial an...[Details]
Electric bicycles have long been a means of transportation for lower-income groups due to their affordability. The largest concentrated expense in the use of electric vehicles is the cost of replac...[Details]
In industry, voltage 0…5 (10) V or current 0 (4)…20 mA is usually used as a method for analog signal transmission, which is also a method often used by programmable controllers. So what are the dif...[Details]
1 Introduction
At present, people have higher and higher requirements for the quality of life. When people are busy with work, soymilk machine is a new type of household beverage machine. It uses so...[Details]
The principles to be followed are as follows:
(1) In terms of component layout, related components should be placed as close as possible. For example, clock generators, crystal oscillat...[Details]
introduction
The air compressor unit in the operating area of a lead-zinc mine in Guangdong is a key equipment in mining production. There are six imported Ingersoll Rand CENTAC air compress...[Details]
1. Introduction
With the rapid development of computer technology, communication technology, and integrated circuit technology, the large-scale application of field control instruments and equ...[Details]
Abstract: Based on the analysis of the characteristics of the IRIG-B (DC) code type, a design method for IRIG-B (DC) time code decoding is proposed. This method consists of a small number of periph...[Details]
Traditional synthesis techniques are increasingly unable to meet the needs of today's very large and complex FPGA designs implemented in 90nm and below process nodes. The problem is that traditio...[Details]
introduction
In the late 1990s, due to the great safety issues of liquid cobalt lithium-ion batteries, people studied and developed polymer lithium-ion batteries. In addition to the performanc...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
