and One-Stage and Two-Stage and One-Stage and Two-Stage
Isolator
Isolator
Isolator
Isolator
Signal central wavelength,
λ
C
Signal wavelength range,
λ
S
Pump channel
wavelength range,
λ
P
Port configuration
Insertion loss at
λ
S
(note
3
)
Max.
Wavelength dependent
Max.
variation at
λ
S
and
C, L, or S bands (note
3
)
Wavelength dependent
Max.
variation at
λ
S
and
C+L band (note
3
)
PDL at
λ
S
(note
3
)
Max.
PMD at
λ
S
(note
3
)
Max.
Isolation of isolator
Min.
4
at
λ
S
(note )
Isolation of WDM
Min.
5
at
λ
P
(note )
Insertion loss (C to R) at
λ
P
Max.
PDL (C to R) at
λ
P
Max.
Directivity (P to R) at
λ
S
Min.
Directivity (R to P) at
λ
P
Min.
Optical return loss
Min.
Maximum optical
power (standard)
Maximum optical power
(high power option)
Tensile load
Max.
Operating temperature
Storage temperature
Package dimensions (D x L)
Fiber type
Pigtail color code (bare fiber)
Pigtail color code (loose tube)
Device marking
C, L or 1
C, L or 1
C, L or 1
C, L or 1
(C=1550 nm, L=1590 nm, 1=1570 nm, S=1510 nm)
C, L or S
C, L or 1
C, L or 1
C, L or 1
C, L or 1
(C=1530 to 1580 nm, L=1590±20 nm, 1=C+L=1530 to 1610nm, S=1490 to 1530 nm)
N/A
1465 to 1495 nm 1465 to 1495 nm 950 to 1010 nm
950 to 1010 nm
Backward
(note
1
)
Forward or
backward
(note
2
)
0.6 dB
0.2 dB
Forward or
backward
(note
2
)
0.6 dB
0.15 dB
Forward or
backward
(note
2
)
0.7 dB
0.2 dB
Forward or
backward
(note
2
)
See table on page 2 See table on page 2 0.5 dB
0.2 dB
0.2 dB
0.15 dB
NA
NA
0.25 dB
0.3 dB
0.25 dB
0.3 dB
0.1 dB
0.05 ps
30 dB
N/A
See table on page 2
0.05 dB
60 dB
N/A
50 dB
500 mW
2000 mW
5N
0.2 dB
0.05 ps
42 dB
N/A
See table on page 2
0.05 dB
60 dB
N/A
50 dB
500 mW
2000 mW
5N
0.06 dB
0.05 ps
30 dB
30 dB
0.4 dB
0.05 dB
60 dB
60 dB
50 dB
500 mW
2000 mW
5N
0.08 dB
0.05 ps
45 dB
30 dB
0.4 dB
0.05 dB
60 dB
60 dB
50 dB
500 mW
2000 mW
0.06 dB
0.05 ps
30 dB
30 dB
0.6 dB
0.1 dB
60 dB
60 dB
50 dB
150 mW
450 mW
0.08 dB
0.05 ps
45 dB
30 dB
0.6 dB
0.1 dB
60 dB
60 dB
50 dB
150 mW
450 mW
5N
5N
5N
-5 to 70 °C
-40 to 85 °C
5.5 mm x 32 mm for bare fiber and 5.5 mm x 40 mm for bare fiber or loose tube
PureMode Hi 1060 for ports transmitting 980 nm (standard), SMF-28 for all others (standard)
Black (C port); Clear (R & P ports)
Red (C port); Blue (R & P ports)
JDSU logo, JDSU model name and device serial number
Note: Parameters are specified for the signal wavelength range and/or pump wavelength range, all polarization states and operating temperature range without connector.
1
2.
3.
4.
5.
Backward tap: C (input), R (tap) and P (output).
Backward pumped: C (λ
S
input and
λ
P
output), R (λ
P
input) and P (λ
S
output). Forward pumped: C (λ
S
and
λ
P
output), R (λ
P
input) and P (λ
S
input).
Forward: P to C and Backward: C to P.
Forward: C to P and Backward: P to C. The isolation data are specified at 23 °C. The isolation range is
λc
± 12 nm or
λc
± 30 nm for one-stage or two-stage isolator, respectively.
Isolation of WDM is given for both C to P and P to C directions.
AHC SERIES
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: AHC-C30R10000
AHC-
Code
C
L
S
1
Signal Wavelength
C-band
L-band
S-band
C+L-bands
Code
J
K
N
Code
0
3
5
Pump Wavelength
No pump option
1480
nm
980
nm
Q
R
S
Code
0
1
2
3
4
5
A
T
Tap Ratio
No
tap
option
1%
2%
3%
4%
5%
1.8%
10%
V
Z
Isolator, Pump Configuration,
Package Length
One-stage, forward-pumped,
32 mm (L)
One-stage, forward-pumped,
40 mm (L)
One-stage, backward-pumped or
tap,
32 mm (L)
One-stage, backward-pumped or
tap,
40 mm (L)
Two-stage, forward-pumped,
40 mm (L)
Two-stage, forward-pumped,
32 mm (L)
Two-stage, backward-pumped
(or
tap),
40 mm (L)
Two-stage, backward-pumped
(or
tap),
32 mm (L)
Code
1
2
4
5
Fiber Pigtail Length
1 meter
2 meters
0.5 meter
1.5 meters
0
Code
0
1
2
3
4
5
8
9
A
B
C
Connectors
No
connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Code
0
1
Fiber Buffer Type
250 µm bare fiber
900 µm loose
tube
Code
0
H
Power Handling Option
Standard:
150 mW at
980
nm
and 500 mW for
all others
High
Power:
450 mW at
980
nm
and 2000 mW
for all others
Note: Other configuratons and wavelengths are available on custom basis.
SMF-28 and PureMode are registered trademarks of Corning Incorporated.
ST and LC are registered trademarks of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
[size=6][color=#ff0000]Some time ago, Xiaoban uploaded a resource [font=Helvetica, Arial, sans-serif] "Scientific Genius: 64 Lectures on Electronic Circuit Design" in the forum download center (post l...
[align=center][b] [/b][/align][align=center][b]Method for real-time measurement of surface pressure and distribution state[/b][/align][align=left]Abstract: In people's daily life and industrial produc...
Use DRIVERMONITOR to display IRP: Major=IRP_MJ_PNP Minor=(0x18) defaultPnp--. IRP 856C8790, STATUS c00000bb When calling m_lower.ActivateConfiguration, AC_FAILED_TO_OPEN_PIPE_OBJECT is returned. Is my...
My calling sequence is: lineOpen --------------Success lineTranslateAddress -----success is set to: lpCallParams->dwTotalSize = dwSizeOfCallParams; lpCallParams->dwBearerMode = LINEBEARERMODE_VOICE; /...
先来一个见过的最大的结构体镇楼[code]/** This describes a single thread/process executing a fio job.*/
struct thread_data {struct thread_options o;unsigned long flags;void *eo;char verror[FIO_VERROR_SIZE];pthread_t t...
[i=s] This post was last edited by Bai Ding on 2016-1-30 18:12 [/i] This is not an F7 board. My problem is that I download a lot of information first. This is definitely a problem. I deserve it. I don...
A biped robot joint constructed by pneumatic artificial muscles is introduced. The joint uses the flexible characteristics of pneumatic artificial muscles to effectively control the impact of the la...[Details]
This issue will briefly introduce the test related to spectrum - occupied bandwidth.
Definition: Occupied bandwidth refers to the bandwidth corresponding to 99% of the total transmitted power, cent...[Details]
In electronic measurement technology, frequency measurement is one of the most basic measurements. The commonly used frequency measurement method and period measurement method have great limitation...[Details]
introduction
Taking care of babies is very tiring because they wake up and sleep frequently, and activities such as feeding and changing clothes will take up a lot of adults' time and energy. ...[Details]
introduction
Usually, there are many input and output ports in RF systems, and it is expensive to use a multi-port network analyzer to analyze scattering characteristics. Therefore, it is ...[Details]
In a Class D audio power amplifier, the preamplifier is a relatively important module. It is located at the front of the entire topology and completes the processing of the input signal source,...[Details]
0Introduction
As a service robot in the field of medical care, the application of smart wheelchairs makes extensive use of mobile robot technology. The key technologies involved in the researc...[Details]
Global IP Solutions (GIPS), a leading provider of high-quality IP multimedia processing solutions, announced that GIPS has enabled Voice over Internet Protocol (VoIP) capabilities for Apple's iPhon...[Details]
Application of TWLA500 in ADC and related fields
FAE: On-site technical support.
Provide technical support for the application of the products you sell, and handle quality issues ra...[Details]
1 Introduction
Intelligent software agents are software programs that can perform specific tasks for users, have a certain degree of intelligence, can autonomously perform some tasks, and ...[Details]
In recent years, with the rapid economic growth, wireless communication has developed rapidly. Since spread spectrum signals have the characteristics of anti-interference, confidentiality, anti-det...[Details]
Abstract:
Under high dynamic conditions, combined with GEC's twelve-channel correlator GP2021, this paper discusses the structural design of GPS receivers and the key technologies inv...[Details]
Test equipment manufacturers are constantly challenged to develop new test solutions that meet the latest product testing needs of their customers, and they often design specialized hardware t...[Details]
Abstract: In many SCART applications, due to the complex signal switching requirements, dedicated ICs are usually used to implement SCART connections. This will bring cost pressure to single SCART ...[Details]
When it comes to ATX power supply, people will think of two "classic" ICs: pulse width modulation chip TL494 and voltage comparator LM339. The new dedicated control chip AT2005B has the functions ...[Details]
Download Centre
京公网安备 11010802033920号
EEWORLD
