SaRonix
Voltage Controlled Crystal Oscillator
Technical Data
Frequency Range:
Frequency Stability:
32 MHz to 125 MHz
±50 ppm over all conditions: operating temperature, voltage change,
load change, calibration tolerance, aging, with V
C
= 2.5V @ 5V,
V
C
= 1.65V @ 3.3V
3.3 & 5V, HCMOS, SMD
S1318 / S1518 Series
Temperature Range:
Operating:
Storage:
Supply Voltage:
Recommended Operating:
Supply Current:
32 to 70 MHz:
70+ to 125 MHz:
ACTUAL SIZE
0 to +70°C, -40 to +85°C
-55 to +125°C
+5 VDC ±5% or 3.3V ±10%
50mA max, 35mA max @ 3.3V
65mA max, 35mA max @ 3.3V
45/55% @50% V
DD,
3.3V version 0 to +70°C only
40/60% @1.4V level, 3.3V version @50% V
DD,
-40 to +85°C
4ns max 20 to 80% V
DD,
1.5ns max @5V with TTL load only
0.5V max, 20% V
DD
max @3.3V
2.5V min, 80% V
DD
max @3.3V
50pF or 5TTL 32 to 50 MHz, 30pF up to 80 MHz @ 3.3V
30pF or 5TTL 50+ to 120 MHz, 95Ω AC up to 125 MHz @ 3.3V
20ps max
50KΩ min
50 kHz min
±25, ±50, ±75 ppm APR* (See Part Numbering Guide)
0.5 to 4.5V, 0.3 to 3.0V
Frequency Increases when Control Voltage Increases
10% max
2.5V @ 5V or 1.65V @ 3.3V
-95 dBc/Hz @ 100 Hz
-110 dBc/Hz @ 1 kHz
-100 dBc/Hz @ 10 kHz
MIL-STD-883,
MIL-STD-883,
MIL-STD-202,
MIL-STD-883,
MIL-STD-202,
MIL-STD-202,
Method 2002, Condition B
Method 2003
Method 211, Conditions A & C
Method 2007, Condition A
Method 215
Method 210, Condition I or J
Output Drive:
Description
A voltage controlled, low current crystal
oscillator, providing precise rise and fall
times to drive high performance applica-
tions. The device is packaged in a 6-pin,
SMD, J-leaded package. The plastic mold-
ed surface mountable package is ideal for
today's automated assembly environ-
ments.
Applications
• For use in phase-locked loop (PLL)
clock and data recovery, frequency
translation, or frequency synthesis ap-
plications in video, video compression,
telephony, and LAN/WAN data com-
munication environments.
• High and wide frequency range from
32 MHz to 125 MHz
ˆ 3.3 or 5 Volt operation
• Compact, plastic molded surface mount
package
• HCMOS and TTL compatible
• Tri-state output
• Available on tape & reel; 24mm tape,
500pcs per reel
Output Waveform
Symmetry:
Rise & Fall Times:
Logic 0:
Logic 1:
Load:
Period Jitter RMS:
Pull Characteristics:
Input Impedance:
Frequency Response (-3dB):
Pullability:
Control Voltage:
Transfer Function:
Linearity:
Center Control Voltage:
Phase Noise:
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
Environmental:
Thermal Shock:
Moisture Resistance:
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Solder Reflow Guide
T
r
1 LEVEL
80% V
DD
50% V
DD
20% V
DD
0 LEVEL
Time
SYMMETRY
1 – 2 minutes
10 sec max
HCMOS
T
f
Temperature – °C
250
200
150
Reflow 240°C max
4°C/sec max
Preheat 183 ±10°C
Cooling
4°C/sec max
* APR = (VCXO Pull relative to specified Output Freq. @
nominal control voltage) – (VCXO Freq. Stability)
DS-171
REV C
SaRonix
141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
SaRonix
Voltage Controlled Crystal Oscillator
Technical Data
Tri-State Logic Table
Pin 2 Input
Logic 1 or NC
Logic 0 or GND
Pin 4 Output
Oscillation
High Impedance
Model
Output
T = Tri-State
Blank = non Tri-State
Series
S1318 = 3V, HCMOS/TTL, SMD VCXO
S1518 = 5V, HCMOS/TTL, SMD VCXO
Stability Tolerance
B = ±50 ppm, 0 to +70°C
E = ±50 ppm, -40 to +85°C
5
4
3.3 & 5V, HCMOS, SMD
S1318 / S1518 Series
Part Numbering Guide
S T 1518
E G B
-
32.0000 (T)
(T) = Tape & Reel
full reel increments only
Frequency (MHz)
Linearity
B = 10%
Pullability (Minimum APR)*
A = ±50 ppm
G = ±25 ppm
H = ±75 ppm, 5V only
Required Input Levels on Pin 2:
Logic 1 = 3.0V min
Logic 0 = 0.5V or 0.3V max
Package Details
6
DENOTES
PIN 1
* APR = (VCXO Pull relative to specified Output Freq. @ nominal control voltage) – (VCXO Freq. Stability)
8.74
.344
10.4
max
.409
SARONIX YYWW
32.0000 MHZ
PART #
1
2
3
Test Circuits:
mA
M
TEST POINT
Pin 6
Pin 5
Pin 4
13.2 max
.520
6.1
max
.240
0.46
.018
5.08
.200
5.9
.234
OSCILLATOR
POWER
SUPPLY
0.1µF
Pin 1
Pin 2
Pin 3
C
L
= 50pF: 32 to 50 MHz
30pF: 50+ to 125 MHz
(Note A)
2.54
.100
VC
0.51
x45° CHAM
.020
.75
.030
1.50±.15
.059±.006
TRI-STATE INPUT or ENABLE/DISABLE
(current limited on fixture)
NOTE A: C
L
includes probe and jig capacitance.
8.74
.344
SIMULATED TEST LOAD
V
CC
Pin Functions:
Pin 1: Control Voltage
Pin 2: Tri-State Control
Pin 3: GND
Pin 4: Output
Pin 5: N/C
Pin 6: V
CC
mm
)
inches
TEST POINT
mA
M
Pin 6
Pin 5
Pin 4
780Ω
Scale: None (Dimensions in
OSCILLATOR
Recommended Land Pattern
5.08
.200
POWER
SUPPLY
0.1µF
Pin 1
Pin 2
Pin 3
C
L
= 15pF
(Note A)
VC
8.62
.339
1.27
.050
2.5
.100
2.54
.100
TRI-STATE INPUT or ENABLE/DISABLE
(current limited on fixture)
NOTE A: C
L
includes probe and jig capacitance.
All specifications are subject to change without notice.
DS-171
REV C
SaRonix
141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
Embedded System
京公网安备 11010802033920号
EEWORLD
