EEWORLDEEWORLDEEWORLD

Part Number

Search

MLP2815S

Description
DC-DC Regulated Power Supply Module, 1 Output, 15W, Hybrid,
CategoryPower/power management    The power supply circuit   
File Size130KB,9 Pages
ManufacturerCrane Co.
Download Datasheet Parametric View All

MLP2815S Overview

DC-DC Regulated Power Supply Module, 1 Output, 15W, Hybrid,

MLP2815S Parametric

Parameter NameAttribute value
package instruction,
Reach Compliance Codeunknown
ECCN codeEAR99
Analog Integrated Circuits - Other TypesDC-DC REGULATED POWER SUPPLY MODULE
Efficiency (main output)83%
Maximum input voltage40 V
Minimum input voltage16 V
Nominal input voltage28 V
JESD-30 codeR-MDMA-P10
Maximum grid adjustment rate0.041%
Maximum load regulation0.133%
Number of functions1
Output times1
Number of terminals10
Maximum operating temperature85 °C
Minimum operating temperature-55 °C
Maximum output voltage15.15 V
Minimum output voltage14.85 V
Nominal output voltage15 V
Package body materialMETAL
Package shapeRECTANGULAR
Package formMICROELECTRONIC ASSEMBLY
ProtectCURRENT
Certification statusNot Qualified
surface mountNO
technologyHYBRID
Temperature levelOTHER
Terminal formPIN/PEG
Terminal locationDUAL
Maximum total power output15 W
Fine-tuning/adjustable outputYES
Base Number Matches1
F
EATURES
• –55°C to +85°C operation
• 10 to 16 VDC input or
16 to 36 VDC input typical
• Fully isolated
• Opto-coupler feedback
• Fixed frequency 125 kHz typical
• Topology – Push-Pull Forward
• Transient protection
50 V for up to 50 ms 28 Vin models
• Inhibit function
• Indefinite short circuit protection
• Trimmable output on single models
• Up to 83% efficiency
DC/DC C
ONVERTERS
12
AND
28 V
OLT
I
NPUT
MHE SERIES 20
WATT
MODELS
VDC O
UTPUT
SINGLE
DUAL
5
±12
12
±15
15
Size (max.): Non-flanged 2.125 x 1.125 x 0.495 (case H6) inches
(53.98 x 28.58 x 12.57 mm)
Flanged 2.910 x 1.125 x 0.495 (case K7) inches
(73.91 x 28.58 x 12.57 mm)
See Section B8, cases H6 and K7, for dimensions.
Weight:
50 grams typical
Screening: Standard or ES. See Section C2 for screening options, see
Section A5 for ordering information.
DESCRIPTION
The MHE Series™ DC/DC converters offer the high efficiencies
associated with switching regulators, yet have full isolation and the
excellent regulation typical of linear regulators. No external compo-
nents are required for operation. MHE Series converters are built
using thick-film hybrid technology, and are sealed in metal packages
for military, aerospace, and other high-reliability applications.
Unscreened models are solder sealed and are guaranteed to pass
a gross leak test (maximum leak rate of 1 x 10
-3
atm.-cc/sec).
Environmentally screened models are hermetically sealed and are
screened as described in Section C2.
The MHE Series converters are pulse-width modulated switching
regulators operating in the forward mode, with a nominal switching
frequency of 125 to 140 kHz. Isolation is achieved through the use
of a transformer in the forward power circuit, and an optocoupler is
used in the feedback/control loop. The full load output power is
available over the full input voltage range. Short-term transients of
50 volts will not impair normal operation for 28 volt input models.
The efficiency is typically greater than 80% over the entire input
voltage range and from approximately 25% of full load to full load.
This feature makes the MHE Series converters ideal for either
battery or aircraft power applications.
An inhibit function is provided on MHE Series converters to allow
power shutdown and startup from a logic input. The unit is inhibited
when the inhibit input pin (pin 2) is connected to the input common
(pin 10). The open circuit voltage of the inhibit pin is 8 to 10 VDC for
12 V input models or 11 to 13 VDC for 28 V input models. During
inhibit, the input inhibit pin must sink approximately 1 mA. In the
inhibit mode, converter output drops to less than 1 V and the input
current is typically 8 mA.
Automatic current limiting circuitry protects the MHE Series
converters against short circuits.
MHE Series converters are rated to operate at full load up to a case
temperature of 85°C, with the output power derated linearly to zero
at 115°C. Because of the unit’s high efficiency, heat sinking require-
ments are minimized, but due consideration should be given to
removing self-generated heat when operating the device at
maximum ratings. To increase dissipation, heat conducting material
(PCB, copper sheet, heat sink, etc.) should be brought into contact
with the converter’s baseplate.
When the MHE Series converters are used in applications requiring
full power operation for extended periods of time, or in shock and
vibration environments, it is highly recommended that the flange-
mount option be used. This option provides improved thermal
transfer capabilities as well as a mechanically secure mounting
configuration.
1
How to display AD's drawing library, project, information and other windows independently?
Directly on the picture, I want to show it like Figure 2. Experts, please help me take a look:)...
675452482 PCB Design
Implementation of Embedded Synchronous Controller Based on DSP and FPGA
[size=4] Aiming at the problems of dynamics and stability in the synchronous control of multiple units of printing and dyeing equipment, a design scheme of embedded synchronous controller based on DSP...
fish001 DSP and ARM Processors
2400 Setup for Building a Resistor Network
Refer to the test introduction of the two-terminal resistor network. The maximum protection current of the 2400 protection buffer is 50mA . To calculate the current source setting for the 8 -pin R1/R2...
Jack_ma Test/Measurement
SqlCeRemoteDataAccess problem
The following code is copied from the Microsoft website [url=http://msdn.microsoft.com/zh-cn/library/system.data.sqlserverce.sqlceremotedataaccess(VS.80).aspx][/url] [code] // Connection String to the...
houcs01 Embedded System
Which SDRAM is 64M BYTE?
The S3C2440 development board originally has 32M BYTE * 2 memory. I want to expand it to 64M BYTE * 2. Which company provides 64M SDRAM and what model? I don't want to use SAMSUNG's SDRAM anymore....
sabrinatang Embedded System
【TI Processor Theme Month】Sitara Data Collection: Part 1
[align=left][font=新宋体][b][size=12pt]TI processor theme month is in full swing, [/size][/b][/font][/align][align=left][font=新宋体][b][size=12pt]I have quietly shipped some [/size][/b][/font][font=新宋体][b]...
EEWORLD社区 TI Technology Forum

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 743  2524  1921  320  157  15  51  39  7  4 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号