26PC Series
(mbar)
Temp. compensated and calibrated pressure sensors
FEATURES
· 0...50 mbar to 0...16 bar
gage or differential
· High impedance bridge
· Miniature package
· Different pinning configurations
· Usable for wet/wet applications
8
SERVICE
All media compatible with
port 1:
- polyetherimide
- silver-filled silicone
- silicon nitride
- polyetherimide
- fluor-silicone
- silicon
Scale:
1 cm
1 inch
port 2
9
:
SPECIFICATIONS
Maximum ratings
Supply voltage
Temperature limits
Storage
Operating
Lead temperature (10 sec. soldering)
Humidity limits
Vibration (MIL-STD-202,
Meth. 213)
16 V
ELECTRICAL CONNECTION
-55 to +100°C
-40 to +85°C
300°C
0...100 %RH
Vs
1
4
-
150 g half sine 11 msec.
150 g
Output
2
3
+
Mechanical shock (qualification tested)
Proof pressure
all 50, 100 and 250 mbar devices
all 1 bar devices
all 2 bar devices
all 5 bar devices
all 10 and 16 bar devices
June 2005 / 596
1
1.4 bar
3 bar
4 bar
12 bar
35 bar
1/4
www.sensortechnics.com
26PC Series
(mbar)
Temp. compensated and calibrated pressure sensors
PRESSURE SENSOR CHARACTERISTICS
V
s
= 10.0 ± 0.01 V, t
amb
= 20°C (unless otherwise noted)
Part number
26PC0050xxA
26PC0100xxA
26PC0250xxA
26PC01K0xxA
26PC02K0xxA
26PC05K0xxA
26PC10K0xxA
26PC16K0xxA
Operating pressure
0 - 50 mbar
0 - 100 mbar
0 - 250 mbar
0 - 1 bar
0 - 2 bar
0 - 5 bar
0 - 10 bar
0 - 16 bar
Min.
10.5 mV
20.0 mV
33.5 mV
93.0 mV
91.0 mV
69.0 mV
82.0 mV
133.0 mV
Full-scale span
2
Typ.
12.0 mV
24.0 mV
36.0 mV
97.0 mV
97.0 mV
72.0 mV
87.0 mV
140.0 mV
Max.
13.6 mV
27.0 mV
38.5 mV
100.0 mV
100.0 mV
76.0 mV
92.0 mV
147.0 mV
Sensitivity typ.
240 µV/mbar
240 µV/mbar
144 µV/mbar
97 µV/mbar
48.5 mV/bar
14.4 mV/bar
8.7 mV/bar
8.7 mV/bar
COMMON PERFORMANCE CHARACTERISTICS
V
s
= 10.0 ± 0.01 V, t
amb
= 25°C (unless otherwise noted)
Characteristics
Zero pressure offset
Temperature effects (0 - 50°C)
4
Offset
all 5 bar devices
all other devices
all 50 to 1000 mbar devices
all 2 bar devices
all other devices
all 50 and 100 mbar devices
all other devices
all 50 to 1000 mbar devices
all 2 bar devices
all other devices
Min.
-2.0
-1.5
Typ.
Max.
+2.0
+1.5
Unit
Span
Linearity (P2 > P1, BSL)
3
Repeatability and hysteresis
5
Long term stability
7
Input impedance
Output impedance
Response time
6
5.5
1.5
±0.5
±0.75
±1.0
±1.0
±0.75...±1.0
±0.25
±0.1
±0.1
±0.2
±0.5
7.5
2.5
±1.0
±1.5
±2.0
±2.0
±1.5
±0.5
±0.2
±0.7
mV
% sp a n
11.5
3.0
1.0
kΩ
ms
Specification notes:
1.
The maximum specified pressure which may be applied to the sensor without causing a permanent change in the output characteristics.
2.
Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. Span is
ratiometric to the supply voltage.
3.
Linearity (BSL), the deviation of measured output at constant temperature (25°C) from "Best Straight Line" determined by three
points, offset pressure, full-scale pressure and half full-scale pressure.
V
- V
offset
[
V
½ full scale
–
{
(full
full scale
pressure)
scale
x (½ full scale pressure) + V
offset
}]
: 2 (V
full scale
) x 100 %
where: V = measured value for each device
4.
Error band of the offset voltage, span or bridge impedance in the specified temperature range, relative to the 25°C reading.
5.
Repeatability, the deviation in output readings for successive application of any given input pressure (all other conditions
remaining constant. Hysteresis, the error defined by the deviation in output signal obtained when a specific pressure point is
approached first with increasing pressure, then with decreasing pressure or vice versa (all other conditions remaining constant).
6.
Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure.
7.
Long term stability of offset and span over a period over one year.
8.
The sensors might be used on both ports, for media compatible with the components, specified under "Service" (page 1).
9. Other sealing materials are available on request.
Minimum order quantities might be required.
10. Other pressure port styles, like barbed ones, luers, modular, M5, needle style or flow through connection, are
available on request.
Minimum order quantities might be required.
2/4
June 2005 / 596
www.sensortechnics.com
26PC Series
(mbar)
Temp. compensated and calibrated pressure sensors
OUTLINE DRAWINGS
10
26PCxxxxD6A (single inline pinning, 1 x 4),
differential pressure devices
12,7
Ø 6,4
Ø 5,1
Ø 1,93
Ø 1,27
PIN 1
7,9
2,29
4 x 1,02
16,2
9,1
P2
1,78
4 x 0,41
4 3 2 1
3 x 2,54
34,4
21,8
11,7
mass:
2 g
P1
12,7
NOM 15,2
dimensions in mm
ORDERING INFORMATION
2
26PC series
compensated
Pressure range
0 - 50 mbar
0 - 100 mbar
0 - 250 mbar
0 - 1 bar
0 - 2 bar
0 - 5 bar
0 - 10 bar
0 - 16 bar
Pinning
2: dual inline pinning, 2 x 2
(not available for
differential devices)
6: single inline pinning, 1 x 4
6
PC
xxxx
x
x
A
10
Pressure port
(Ø 5.1 mm)
0050:
0100:
0250:
01K0:
02K0:
05K0:
10K0:
16K0:
Pressure mode
D: differential pressure
G: gage pressure
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
4/4
June 2005 / 596
www.sensortechnics.com
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
