TRU050-GKLHB-12M6240000 datasheet, PDF

Datasheet> All Categories > Analog mixed-signal IC> The signal circuit> TRU050-GKLHB-12M6240000

TRU050-GKLHB-12M6240000: DescriptionPhase Locked Loop, CDSO16, SMD-16; CategoryAnalog mixed-signal IC The signal circuit; File Size172KB，14 Pages; ManufacturerVectron International, Inc.; Websitehttp://www.vectron.com/; Environmental Compliance

Download Datasheet Parametric View All

TRU050-GKLHB-12M6240000 Overview

Phase Locked Loop, CDSO16, SMD-16

TRU050-GKLHB-12M6240000 Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Parts packaging code	SOIC
package instruction	SOP,
Contacts	16
Reach Compliance Code	compliant
Analog Integrated Circuits - Other Types	PHASE LOCKED LOOP
JESD-30 code	R-CDSO-G16
JESD-609 code	e4
length	20.32 mm
Humidity sensitivity level	1
Number of functions	1
Number of terminals	16
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	SOP
Package shape	RECTANGULAR
Package form	SMALL OUTLINE
Peak Reflow Temperature (Celsius)	260
Certification status	Not Qualified
Maximum seat height	4.69 mm
Maximum supply voltage (Vsup)	3.6 V
Minimum supply voltage (Vsup)	3 V
Nominal supply voltage (Vsup)	3.3 V
surface mount	YES
Temperature level	INDUSTRIAL
Terminal surface	Gold (Au) - with Nickel (Ni) barrier
Terminal form	GULL WING
Terminal pitch	2.54 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	40
width	7.88 mm
Base Number Matches	1

Preview

Download Datasheet

View All

TRU050

Complete VCXO based Phase-Locked Loop

Features

•

Output Frequencies to 65.536 MHz

•

5.0 V or 3.3Vdc Operation

•

Tri-State Output

•

Holdover on Loss of Signal Alarm

•

VCXO with CMOS Outputs

•

0/70° or –40/85°C Temperature Range

•

Ceramic SMD Package

•

RoHS/Lead Free Compliant

The TRU050, VCXO based PLL

Description

The VI TRU050 is a user-configurable crystal-based

PLL integrated circuit. It includes a digital phase

detector, op-amp, VCXO and additional integrated

functions for use in digital synchronization

applications. Loop filter software is available as well

SPICE models for circuit simulation.

Applications

•

Frequency Translation

•

Clock Smoothing

•

NRZ Clock Recovery

•

DSLAM, ADM, ATM, Aggregation, Optical

Switching/Routing, Base Station

•

Low Jitter PLL’s

Figure 1. TRU050 Block Diagram

Tel: 1-88-VECTRON-1

•

Web:

www.vectron.com

Page 1 of 14

Rev: 26Aug2008

Vectron International, 267 Lowell Rd, Hudson NH 03051-4916

TRU050, VCXO Based PLL

TRU050 Theory of Operation

Phase Detector

The phase detector has two buffered inputs, DATAIN and CLKIN, which are designed to switch at 1.4 volts.

DATAIN is designed to accept an NRZ data stream but may also be used for clock signals which have about

a 50% duty cycle. CLKIN is connected to OUT1 or OUT2, or a divided version of one of these outputs. CLKIN

and DATAIN and are protected by ESD diodes and should not exceed the power supply voltage or ground by

more than a few hundred millivolts.

The phase detector is basically a latched flip flop/exclusive-or gate/differential amplifier filter design to

produce a DC signal proportional to the phase between the CLKIN and DATAIN signals, see figure 4 for a

block diagram and figure 5 for a open loop transfer curve. This simplies the PLL design as the designer does

not have to filter narrow pulse signal to a DC level. Under locked conditions the rising edge CLKIN will be

centered in the middle of the DATAIN signal, see figure 6.

The phase detector gain is 0.53V/rad x data density for 5volt operation, and 0.35V/rad x data density for 3.3

volt operation. Data density = 1.0 for clock signals and is system dependent on coding and design for NRZ

signals, but 0.25 could be used as a starting point for data density.

The phase detector output is a DC signal for DATAIN frequencies greater than 1MHz but produces signficant

ripple when inputs are less than 200kHz. Additional filtering is required for low input frequency applications

such as 8kHz frequency translation, see figures 8 and 9.

Under closed loop conditions the active filter has a blocking capacitor which provides a very high DC gain, so

under normal locked conditions and input frequencies >1MHz, PHO will be about V

/2 and will not vary

signifigantly with changes in input frequency (within lock range). The control (voltage pin 1) will vary

according to the input frequency offset, but PHO will remain relatively constant.

Data In

(pin 7)

Clock In

(pin 9)

30 kΩ

20 kΩ

PHO

(pin 6)

Gain = 5 V / 2π

Gain = 2 / 3

Figure 4. Simplified Phase Detector Block Diagram

Vectron International, 267 Lowell Rd, Hudson NH 03051-4916

Page 4 of 14

Tel: 1-88-VECTRON-1

•

Web:

www.vectron.com

Rev: 26Aug2008

Recommended Resources

M50560 infrared transmitter circuit

High frequency small signal resonant amplifier

Use MC34063 to make 3.6V electrical to 9V circuit diagram

6 to 9V 100mA voltage regulator circuit

Simple LED driver

555 high-precision linear voltage/frequency converter circuit

Got the health manager certificate: [i=s]This post was last edited by 1nnocent on 2023-2-24 17:11[/i]I got my health manager certificate today.The next step is to apply for subsidies. If you haven't paid social security for 36 months, y...; 1nnocent Talking

I saw that the public account had to pay to read this, so I checked it out and discussed it with like-minded people.: Some small differences between board-level low-noise amplifiers and chip-level low-noise amplifiers Both board-level low noise amplifiers (LNA) and chip-level low noise amplifiers (ILNA) are amplifier...; btty038 RF/Wirelessly

【GD32E503 Review】——step02. Let’s run a test with the domestically produced M33: 【GD32E50x Series Performance Introduction】The GD32E5 series is based on the latest Armv8-M architecture Cortex-M33 core, with a processor frequency of up to 180MHz, built-in hardware multiplier/divide...; yang377156216 Domestic Chip Exchange

Xunwei 4412 Development Board Linux Character Device Control (Part 2): 17.3 Character Class Buzzer BuzzerSimilar to LED lights, the device node of the buzzer is also in the /dev directory, as shown in the figure below.The hardware of the buzzer is similar to that of the ...; 遥寄山川 ARM Technology

Xunwei IMX6 development board Mfgtools tool burns the image separately-device tree Qt system: Burn the device tree version Qt system. Use the burning tool in the iMX6Q device tree CD to modify the cfg.ini in the folder as shown below:Open the "android_m6.0.1_2.0.0_ga_tool_20190725\mfgtools\Pro...; 遥寄山川 ARM Technology

Based in Shenzhen, recruitment position: analog IC design engineer: Job Description: 1. Responsible for formulating product indicators and architecture design according to product requirements;2. Responsible for circuit design and simulation verification; responsible ...; mgstanley Recruitment

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components