PM MEMS ATTENUATOR
DiCon’s PM MEMS Attenuator is based on a micro-electro-
mechanical system (MEMS) chip.The PM MEMS chip consists of
an electrically movable mirror on a silicon support. A voltage applied
to the PM MEMS chip causes the mirror to rotate, which changes
the coupling of light between the input and output fibers of the PM
MEMS Attenuator.
FEATURES
n
n
n
n
n
Small attenuator package
Based on DiCon’s proven MEMS platform
Available in opaque or transparent versions
Qualified to GR-1221
High Extinction Ratio
APPLICATIONS
PM MEMS Attenuators are used for distributed power equalization
within OADMs, MUX/DMUXes, Band Equalizers, Channel
Equalizers, Optical Cross-Connects, Line Cards and Transponders.
Polarization Maintaining Attenuators can also be used for power
adjustment in polarization sensitive devices such as modulators.
Specifications subject to change. Copyright © 2010 DiCon Fiberoptics, Inc. All rights reserved.
PM MEMS ATTENUATOR
O PTI CAL SPECI FI CATI O NS
PARAMETER
Excess Loss
Broad Band
Application
Narrow Band
Application
2
1
O RD ERI N G I N FO R M ATI O N
MT C
15
4B
Housing Type
C
Cylindrical
Attenuator Type
T
Transparent
1
O
Opaque
2
Operating Wavelength Range
15
1528 - 1563 nm
Attenuator Range
20
20 dB min.
X
Specify X dB min. (X <= 40)
Ripple Type
S
Slow ripple (broad band)
F
Fast ripple (narrow band)
Connector Key Orientation
PMF
Fast axis
PMS
Slow axis
PMN
No connector
Fiber / Jacket Type
4B
9/125 μm Panda fiber with 400 μm buffer
Connector Type
FC
FC/SPC
FC/APC FC/APC
X
specify connector type
3
N
None
Pigtail Length
1
1 meter
X
Specify X meters
Pin Bending
S
Straight Pins
B
Bent Pins
1. Minimum insertion loss at 0 V.
2. Minimum insertion loss at 6 - 7 V (high isolation at 0 V).
3. Connector Types: FC/UPC, SC, SC/APC, SC/UPC, LC, LC/UPC, MU/UPC.
RATING
0.8 dB max
0 to 15 dB
15 to 20 dB
0 to 15 dB
15 to 20 dB
18 dB min.
20 dB/V max.
-50 dB max.
500 mW max.
2 ms max.
0.1 dB max.
1 x 10
9
cycles min.
Panda 400 or equivalent
-5°C to +70°C
-40°C to +85°C
0.7 dB max.
1.0 dB max.
0.3 dB max.
0.4 dB max.
WDL
Extinction Ratio
Attenuation Slope
Back Reflection
Optical Power
Response Time
Repeatability
3
Durability
Fiber Type
Operating Temperature
Storage
Temperature
1. All Specifications at room temperature, without connectors
2. Maximum change of each 2 nm segment within the operating range
3. Repeatability is defined after 100 cycles
ELEC TRI CAL SPECI FI CATI O NS
PARAMETER
Actuation type
DC Drive Voltage
Voltage Damage Threshold
Resistance
Power Consumption
RATING
Non-latching
0-5 VDC (7 V for opaque)
10 VDC max.
2 MΩ min.
20 uWatt max.
M ECHAN I CAL D I M ENSI O NS
Straight Pins
O PTI CAL PERFO R M AN CE
Transparent
0
10
Attenuation (dB)
Attenuation (dB)
20
30
40
50
60
0
1
2
3
4
5
6
7
0
10
20
30
40
50
60
0
1
2
3
4
5
6
7
Opaque
Bent Pins
Control Voltage (V)
Control Voltage (V)
DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510) 620-5000 Fax. (510) 620-4100 www.diconfiberoptics.com
0121C
PM MEMS MEMS ATTENUATOR
SPECIFICATIONS
/ORDERING INFORMATION
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
