1. Converter will undergo input over-voltage shutdown.
2. Derate output power to 50% of rated power at Tcase = 135ºC. 135ºC is above the specified operating range. See Figure 5.
3. High or low state of input voltage must persist for about 200µs to be acted on by the shutdown circuitry.
4. Current limit inception is defined as the point where the output voltage has dropped to 90% of its nominal value. See Current Limit discussion in
Features Description section.
5. Parameter not tested but guaranteed to the limit specified.
6. Load current transition time ≥ 10µs.
7. Line voltage transition time ≥ 100µs.
8. Input voltage rise time ≤ 250µs.
9. Operating the converter at a synchronization frequency above the free running frequency will cause the converter’s efficiency to be slightly reduced
and it may also cause a slight reduction in the maximum output current/power available. For more information consult the factory.
10. After a disable or fault event, module is inhibited from restarting for 100ms. See Shut Down section of the Control Features description.
11. Only the ES and HB grade products are tested at three temperatures. The C grade products are tested at one temperature. Please refer to the
Construction and Environmental Stress Screening Options table for details.
12. These derating curves apply for the ES and HB grade products. The C grade product has a maximum case temperature of 70ºC.
13. The specified operating case temperature for ES grade products is -45ºC to 100ºC. The specified operating case temperature for C grade products
is 0ºC to 70ºC.
Product# MQHL-28-15S
Phone 1-888-567-9596
www.SynQor.com
Doc.# 005-0005372 Rev. B
08/14/13
Page 4
MQHL-28-15S
Output:
15V
Current:
3.3A
Technical Figures
100
95
90
100
95
90
Efficiency (%)
Efficiency (%)
85
80
75
70
65
60
0.00
16 Vin
28 Vin
40 Vin
85
80
75
70
65
60
-55ºC
16 Vin
28 Vin
40 Vin
0.66
1.32
1.98
2.64
3.30
25ºC
125ºC
Load Current (A)
Case Temperature (ºC)
Figure 1:
Efficiency at nominal output voltage vs. load current for
minimum, nominal, and maximum input voltage at Tcase=25°C.
12
10
Figure 2:
Efficiency at nominal output voltage and 60% rated power vs.
case temperature for input voltage of 16V, 28V, and 40V.
12
10
Power Dissipation (W)
8
6
4
2
0
0.00
16 Vin
28 Vin
40 Vin
Power Dissipation (W)
8
6
4
2
0
-55ºC
16 Vin
28 Vin
40 Vin
0.66
1.32
1.98
2.64
3.30
25ºC
125ºC
Load Current (A)
Case Temperature (ºC)
Figure 3:
Power dissipation at nominal output voltage vs. load current
for minimum, nominal, and maximum input voltage at Tcase=25°C.
4.0
3.3
2.6
59
50
40
Figure 4:
Power dissipation at nominal output voltage and 60% rated
power vs. case temperature for input voltage of 16V, 28V, and 40V.
18
16
14
Output Voltage (V)
12
10
8
6
4
2
Iout (A)
2.0
30
1.3
Tjmax = 105º C
0.7
0.0
25
45
65
85
105
125
Tjmax = 125º C
Tjmax = 145º C
20
10
0
145
Pout (W)
0
0
1
Case Temperature (ºC)
Load Current (A)
2
3
4
5
Figure 5:
Output Current / Output Power derating curve as a
function of Tcase and the Maximum desired power MOSFET junction
temperature at Vin = 28V (see Note 12).
Product# MQHL-28-15S
Phone 1-888-567-9596
Figure 6:
Output voltage vs. load current showing typical current limit
Sorry, I have to trouble you with such a simple question. I have graduated for many years and have almost forgotten it. Recently, I encountered problems when reading relevant materials. I feel sorry f...
[i=s]This post was last edited by paulhyde on 2014-9-15 04:04[/i] Since cameras appeared in this year's TI Cup, we bought OV7670 modules. Does anyone know anything about this? Please give me some guid...
As the title says, now I know the current of 80A and the voltage of 26V, how should I choose this high current Schottky diode? I beg for advice from the masters. I asked others, and their answer is cu...
Without further ado, let's just experience it~When the F7 Demo program is running, the computer will automatically recognize the USB drive, just copy the bin file into it, and it will be OK!...
With the promotion of the construction of intelligent communities in the country, anti-theft systems have become essential equipment for intelligent communities. Especially in recent years, the urg...[Details]
With the rapid development of science and technology, especially the widespread application of digital technology and various ultra-large-scale integrated circuits, electronic equipment, especially...[Details]
In this article, the high-performance DSP developed by TI can be used as an effective confidentiality method if it is applied to PC encryption cards.
As an effective network security solution,...[Details]
Vertical cavity surface emitting lasers (VCSELs) are gradually replacing traditional edge emitting lasers, especially in low bandwidth and short-distance communication systems where cost factors ar...[Details]
Contact resistance
is the resistance to current flow through a closed pair of contacts. This type of measurement is performed on devices such as connectors,
relays
, and switches. The...[Details]
1. System Structure
This system is a simulation system of indoor air-conditioning temperature/humidity control system. The data acquisition and control center collects temperature/humidity...[Details]
1 Introduction to HART Protocol
HART (Highway Addressable Remote Transducer), an open communication protocol for addressable remote sensor high-speed channels, was launched by Rosemen in the U...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
introduction
MAX6636 is a multi-channel precision temperature monitor that can not only monitor local temperature, but also connect up to 6 diodes externally. Each channel has a programmable...[Details]
Continuity test
A variety of devices need to be checked for continuity, including cable assemblies, printed circuit boards, and connectors to ensure that these components have the expected contin...[Details]
We know that the inverter consists of two parts: the main circuit and the control circuit. Due to the nonlinearity of the main circuit (switching action), the inverter itself is a source of harmoni...[Details]
Our flight had just begun to descend when a gentleman sitting next to me turned to talk to me about engineering—he had seen me reading an engineering journal. The gentleman next to me said that he ...[Details]
Against the backdrop of global warming, energy conservation and emission reduction have become a global hotspot and focus, which has also sounded the clarion call for the take-off of the LED lighti...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
