OptiSnap
®
Connector, ST
®
Compatible
Organiser pack, single-mode (OS2)
143
With proven field-installable connector technology, fibre
terminations using the OptiSnap
®
connector system are
fast, easy and reliable. Corning high-precision mechani-
cal splice technology enables fibre optic networks to be
installed quickly and cost effectively.
The Corning go/no-go feedback signal allows the installer
to verify that the installation is performed right the first
time, every time. Insert the fibre, activate the cam and
watch the pass/fail light illuminate, instilling confidence in
every connector installed.
The factory-polished ceramic ferrule provides supe-
rior quality for end-face geometry. The single-mode
OptiSnap
®
Connector is available in an ultra physical
contact (UPC) polish or an angled physical contact (APC)
polish (SC only), offering you a higher grade of perfor-
mance for your field terminations. With fast installation
time and low insertion loss, the OptiSnap Connector
system provides a good alternative to fusion splicing.
Installation is as easy as strip, clean, cleave, cam and
crimp.
With
proven field-
Part Number: OSNP-STU-900-Z
Features and Benefits
No-epoxy/no-polish or other consumables required
Quick and easy installation, less than one minute per
connector on average
100 percent factory tested for insertion loss
Typical insertion loss of 0.2 dB for UPC and 0.4 dB for
APC connectors
Factory-polished end face
Low insertion loss and high-performance return loss
Reliable, proven mechanical splice technology
Over 40 million connectors deployed in various applica-
tions
No need for electrical power for ovens or lights
Reduces complexity
Standards
1
1
Intermateability
Connectors are FOCIS
compliant with TIA/EIA 604-
3 (SC), FOCIS 10 (LC)
Passed EIA/TIA 568-B.3
Approval and Listings
19.48
115
0
Product Specification OSNP-STU-900-Z_EMEA_BEN
Page 1 | Revision date 2014-02-17
OptiSnap
®
Connector, ST
®
Compatible
Organiser pack, single-mode (OS2)
Specifications
General Specifications
Technology
Keyed
Product Type
Packaging
Fibre Category
No-Epoxy/No-Polish
No
Field-Installable Connectors
Organiser Pack
Single-mode (OS2)
Temperature Range
Operation
0 °C to 60 °C (32 °F to 140 °F)
Design - Connector
Connector Type
Ferrule
Housing Material
Housing Colour
Boot Colour
ST
®
Compatible
Ceramic
Composite
Amber
Blue
Mechanical Specifications - Connector
Durability
Tensile strength jacketed cable
Tensile strength 900 µm cable
Temperature cycling
Nominal fibre outer diameter
Cable Compatibility
< 0.2 dB change by 500 rematings FOTP-21
49.5 N, change ≤ 0.2 dB (11.24 lb, change ≤ 0.2 dB)
4.8 N, change ≤ 0.2 dB (1.1 lb, change ≤ 0.2 dB)
≤ 0.3 dB
125 µm
900 µm
Optical Specifications - Connector
Insertion Loss, Typical
Insertion Loss, Maximum
Reflectance, -0°C to +60°C
Reflectance (angled cleave), -0°C to +60°C
0.2 dB
0.5 dB
≥ -32 dB (FBC-009, for 900 µm)
≥ -40 dB (FBC-016, for 900 µm)
Product Specification OSNP-STU-900-Z_EMEA_BEN
Page 2 | Revision date 2014-02-17
OptiSnap
®
Connector, ST
®
Compatible
Organiser pack, single-mode (OS2)
Chemical characteristics
RoHS
Free of hazardous substances according to RoHS 2002/95/
EG
Ordering Information
Part Number
Product Description
OSNP-STU-900-Z
OptiSnap
®
Connector, ST
®
Compatible, single-mode (OS2),
ceramic ferrule, organiser pack, amber housing, blue boot
Shipping Information
Units per Delivery
Package Contents
25/1
25 connectors, 25 crimp bands, 25 boots (900 µm), 25 boots
(3.0 mm)
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, GERMANY
00 800 2676 4641 · FAX: +49 30 5303 2335 · www.corning.com/cablesystems/emea
A complete listing of the trademarks of Corning Cable Systems is available at www.corning.com/cablesystems/emea/trade-
marks. Corning Cable Systems is ISO 9001 certified. © 2014 Corning Cable Systems. All rights reserved.
Product Specification OSNP-STU-900-Z_EMEA_BEN
Page 3 | Revision date 2014-02-17