I want to use JR45 to replace the serial port. It means two boards, the communication between the boards is made into a serial port, and the wiring is connected with a network cable, but not connected...
The most important thing to remember about both DACs and ADCs is that the input or output is a digital signal, so the signal is quantized. That is, an N-bit word represents one of 2N possible states, ...
I want to make an oscilloscope that can store about 500 waveforms, and use an LCD to display them. The time sampling unit is in microseconds. What chip should I use? No one in my company makes the boa...
Has anyone written the driver code for an SD card? The driver code I saw in the example program of the STM32 development board is more than 3,000 lines long, and the initialization and operation proce...
The "darkness effect" refers to the fact that in a dark place, the two parties on a date cannot see each other's expressions clearly, so it is easy to reduce their vigilance and feel safe. In this cas...
Magnetic resonance imaging (MRI) systems for medical and scientific applications require a high-performance, high-power inductor capable of establishing a uniform, strong magnetic field. Transverse el...[Details]
Preface
In recent years, many compact portable electronic products have been developed, such as mobile phones, digital cameras, MP3, MP4, PDA, GPS and DVD, etc. They are not only small in size...[Details]
Mesh network architecture and advantages
The Internet is a flat network. The routers that make up the Internet are on the same plane. The mesh network formed by multiple paths between ...[Details]
0 Introduction
Electric vehicles are high-tech products that integrate computer technology, communication technology, electronic technology, and new material technology. They have a complex ...[Details]
Temperature measurement and control are extremely important topics in all aspects of industry, agriculture, scientific research, national defense and people's daily life. Temperature measurement sy...[Details]
OSRAM Opto Semiconductors publishes complete Life Cycle Assessment (LCA) results for LED lamps, demonstrating their excellent environmental performance
OSRAM's Life Cycle Assessment (LCA) stud...[Details]
1. Introduction
Driven by Internet technology and its applications, the construction of educational informatization has developed rapidly. Various network-based applications such as online...[Details]
Game console designers must find a balance between achieving system versatility, reliability, and low cost. Market pressures often force initial console prices to be below profitable levels. Howeve...[Details]
The automotive industry is facing a technological revolution. In the coming years, a new generation of electric vehicles (EVs) and hybrid electric vehicles (HEVs) with mass markets and low emission...[Details]
O Introduction
In the control and data acquisition system of radar, parallel data bus is usually used for control signal transmission and data exchange. In previous designs, a large number...[Details]
0 Introduction
It is impossible for any system to be completely noise-free. In fact, there are many cases where the useful signal is drowned by the strong background noise. Therefore, it i...[Details]
In certain applications, design requirements may require the system's switch-mode power supply to provide output more quickly than a conventional power supply. Figure 1 shows the bootstrap (or star...[Details]
Abstract: With the development of integration technology, the cost-effectiveness of high-speed analog-to-digital converters continues to improve, and its application range is becoming wider and ...[Details]
1 Introduction
Before the aircraft takes off, the ground power supply usually supplies power to the aircraft's onboard equipment. After takeoff, the aircraft engine drives the generator to...[Details]