0
R
Virtex™-E 1.8 V
Field Programmable Gate Arrays
0
0
DS022-1 (v2.2) November 9, 2001
Preliminary Product Specification
Features
•
Fast, High-Density 1.8 V FPGA Family
- Densities from 58 k to 4 M system gates
- 130 MHz internal performance (four LUT levels)
- Designed for low-power operation
- PCI compliant 3.3 V, 32/64-bit, 33/ 66-MHz
Highly Flexible SelectI/O+™ Technology
- Supports 20 high-performance interface standards
- Up to 804 singled-ended I/Os or 344 differential I/O
pairs for an aggregate bandwidth of > 100 Gb/s
Differential Signalling Support
- LVDS (622 Mb/s), BLVDS (Bus LVDS), LVPECL
- Differential I/O signals can be input, output, or I/O
- Compatible with standard differential devices
- LVPECL and LVDS clock inputs for 300+ MHz
clocks
Proprietary High-Performance SelectLink™
Technology
- Double Data Rate (DDR) to Virtex-E link
- Web-based HDL generation methodology
Sophisticated SelectRAM+™ Memory Hierarchy
- 1 Mb of internal configurable distributed RAM
- Up to 832 Kb of synchronous internal block RAM
- True Dual-Port™ BlockRAM capability
- Memory bandwidth up to 1.66 Tb/s (equivalent
bandwidth of over 100 RAMBUS channels)
- Designed for high-performance Interfaces to
External Memories
- 200 MHz ZBT* SRAMs
- 200 Mb/s DDR SDRAMs
- Supported by free Synthesizable reference design
* ZBT is a trademark of Integrated Device Technology, Inc.
•
•
•
•
•
•
•
•
•
•
•
High-Performance Built-In Clock Management Circuitry
- Eight fully digital Delay-Locked Loops (DLLs)
- Digitally-Synthesized 50% duty cycle for Double
Data Rate (DDR) Applications
- Clock Multiply and Divide
- Zero-delay conversion of high-speed LVPECL/LVDS
clocks to any I/O standard
Flexible Architecture Balances Speed and Density
- Dedicated carry logic for high-speed arithmetic
- Dedicated multiplier support
- Cascade chain for wide-input function
- Abundant registers/latches with clock enable, and
dual synchronous/asynchronous set and reset
- Internal 3-state bussing
- IEEE 1149.1 boundary-scan logic
- Die-temperature sensor diode
Supported by Xilinx Foundation™ and Alliance Series™
Development Systems
- Further compile time reduction of 50%
- Internet Team Design (ITD) tool ideal for
million-plus gate density designs
- Wide selection of PC and workstation platforms
SRAM-Based In-System Configuration
- Unlimited re-programmability
Advanced Packaging Options
- 0.8 mm Chip-scale
- 1.0 mm BGA
- 1.27 mm BGA
- HQ/PQ
0.18
m
m 6-Layer Metal Process
100% Factory Tested
© 2001 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and disclaimers are as listed at
http://www.xilinx.com/legal.htm.
All other trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.
DS022-1 (v2.2) November 9, 2001
Preliminary Product Specification
www.xilinx.com
1-800-255-7778
Module 1 of 4
1
Virtex™-E 1.8 V Field Programmable Gate Arrays
R
Table 1:
Virtex-E Field-Programmable Gate Array Family Members
Device
XCV50E
XCV100E
XCV200E
XCV300E
XCV400E
XCV600E
XCV1000E
XCV1600E
XCV2000E
XCV2600E
XCV3200E
System
Gates
71,693
128,236
306,393
411,955
569,952
985,882
1,569,178
2,188,742
2,541,952
3,263,755
4,074,387
Logic
Gates
20,736
32,400
63,504
82,944
129,600
186,624
331,776
419,904
518,400
685,584
876,096
CLB
Array
16 x 24
20 x 30
28 x 42
32 x 48
40 x 60
48 x 72
64 x 96
72 x 108
80 x 120
92 x 138
104 x 156
Logic
Cells
1,728
2,700
5,292
6,912
10,800
15,552
27,648
34,992
43,200
57,132
73,008
Differential
I/O Pairs
83
83
119
137
183
247
281
344
344
344
344
User
I/O
176
196
284
316
404
512
660
724
804
804
804
BlockRAM
Bits
65,536
81,920
114,688
131,072
163,840
294,912
393,216
589,824
655,360
753,664
851,968
Distributed
RAM Bits
24,576
38,400
75,264
98,304
153,600
221,184
393,216
497,664
614,400
812,544
1,038,336
Virtex-E Compared to Virtex Devices
The Virtex-E family offers up to 43,200 logic cells in devices
up to 30% faster than the Virtex family.
I/O performance is increased to 622 Mb/s using Source
Synchronous data transmission architectures and synchro-
nous system performance up to 240 MHz using sin-
gled-ended SelectI/O technology. Additional I/O standards
are supported, notably LVPECL, LVDS, and BLVDS, which
use two pins per signal. Almost all signal pins can be used
for these new standards.
Virtex-E devices have up to 640 Kb of faster (250 MHz)
block SelectRAM, but the individual RAMs are the same
size and structure as in the Virtex family. They also have
eight DLLs instead of the four in Virtex devices. Each indi-
vidual DLL is slightly improved with easier clock mirroring
and 4x frequency multiplication.
V
CCINT
, the supply voltage for the internal logic and mem-
ory, is 1.8 V, instead of 2.5 V for Virtex devices. Advanced
processing and 0.18
m
m design rules have resulted in
smaller dice, faster speed, and lower power consumption.
I/O pins are 3 V tolerant, and can be 5 V tolerant with an
external 100
W
resistor. PCI 5 V is not supported. With the
addition of appropriate external resistors, any pin can toler-
ate any voltage desired.
Banking rules are different. With Virtex devices, all input
buffers are powered by V
CCINT
. With Virtex-E devices, the
LVTTL, LVCMOS2, and PCI input buffers are powered by
the I/O supply voltage V
CCO
.
The Virtex-E family is not bitstream-compatible with the Vir-
tex family, but Virtex designs can be compiled into equiva-
lent Virtex-E devices.
The same device in the same package for the Virtex-E and
Virtex families are pin-compatible with some minor excep-
tions. See the data sheet pinout section for details.
General Description
The Virtex-E FPGA family delivers high-performance,
high-capacity programmable logic solutions. Dramatic
increases in silicon efficiency result from optimizing the new
architecture for place-and-route efficiency and exploiting an
aggressive 6-layer metal 0.18
m
m CMOS process. These
advances make Virtex-E FPGAs powerful and flexible alter-
natives to mask-programmed gate arrays. The Virtex-E fam-
ily includes the nine members in
Table 1.
Building on experience gained from Virtex FPGAs, the
Virtex-E family is an evolutionary step forward in program-
mable logic design. Combining a wide variety of program-
mable system features, a rich hierarchy of fast, flexible
interconnect resources, and advanced process technology,
the Virtex-E family delivers a high-speed and high-capacity
programmable logic solution that enhances design flexibility
while reducing time-to-market.
Virtex-E Architecture
Virtex-E devices feature a flexible, regular architecture that
comprises an array of configurable logic blocks (CLBs) sur-
rounded by programmable input/output blocks (IOBs), all
interconnected by a rich hierarchy of fast, versatile routing
Module 1 of 4
2
www.xilinx.com
1-800-255-7778
DS022-1 (v2.2) November 9, 2001
Preliminary Product Specification
R
Virtex™-E 1.8 V Field Programmable Gate Arrays
resources. The abundance of routing resources permits the
Virtex-E family to accommodate even the largest and most
complex designs.
Virtex-E FPGAs are SRAM-based, and are customized by
loading configuration data into internal memory cells. Con-
figuration data can be read from an external SPROM (mas-
ter serial mode), or can be written into the FPGA
(SelectMAP™, slave serial, and JTAG modes).
The standard Xilinx Foundation Series™ and Alliance
Series™ Development systems deliver complete design
support for Virtex-E, covering every aspect from behavioral
and schematic entry, through simulation, automatic design
translation and implementation, to the creation and down-
loading of a configuration bit stream.
Table 2:
Performance for Common Circuit Functions
Function
Register-to-Register
Adder
Pipelined Multiplier
Address Decoder
16:1 Multiplexer
Parity Tree
9
18
36
16
64
8x8
16 x 16
16
64
4.3 ns
6.3 ns
4.4 ns
5.1 ns
3.8 ns
5.5 ns
4.6 ns
3.5 ns
4.3 ns
5.9 ns
Bits
Virtex-E (-7)
Higher Performance
Virtex-E devices provide better performance than previous
generations of FPGAs. Designs can achieve synchronous
system clock rates up to 240 MHz including I/O or 622 Mb/s
using Source Synchronous data transmission architech-
tures. Virtex-E I/Os comply fully with 3.3 V PCI specifica-
tions, and interfaces can be implemented that operate at
33 MHz or 66 MHz.
While performance is design-dependent, many designs
operate internally at speeds in excess of 133 MHz and can
achieve over 311 MHz.
Table 2
shows performance data for
representative circuits, using worst-case timing parameters.
Chip-to-Chip
HSTL Class IV
LVTTL,16mA, fast slew
LVDS
LVPECL
Virtex-E Device/Package Combinations and Maximum I/O
Table 3:
Virtex-E Family Maximum User I/O by Device/Package (Excluding Dedicated Clock Pins)
XCV
50E
CS144
PQ240
HQ240
BG352
BG432
BG560
FG256
FG456
FG676
FG680
FG860
FG900
FG1156
512
176
176
176
284
176
312
404
444
512
512
660
660
660
512
660
700
724
804
804
804
512
660
196
260
260
316
316
404
316
404
404
404
404
94
158
XCV
100E
94
158
XCV
200E
94
158
158
158
158
158
XCV
300E
XCV
400E
XCV
600E
XCV
1000E
XCV
1600E
XCV
2000E
XCV
2600E
XCV
3200E
DS022-1 (v2.2) November 9, 2001
Preliminary Product Specification
www.xilinx.com
1-800-255-7778
Module 1 of 4
3
Virtex™-E 1.8 V Field Programmable Gate Arrays
R
Virtex-E Ordering Information
Example: XCV300E-6PQ240C
Device Type
Temperature Range
C = Commercial (Tj = 0 C to +85 C)
I = Industrial (Tj = -40 C to +100 C)
Number of Pins
Package Type
BG = Ball Grid Array
FG = Fine Pitch Ball Grid Array
HQ = High Heat Dissipation
DS022_043_072000
Speed Grade
(-6, -7, -8)
Figure 1:
Ordering Information
Revision History
The following table shows the revision history for this document.
Date
12/7/99
1/10/00
1/28/00
Version
1.0
1.1
1.2
Initial Xilinx release.
Re-released with spd.txt v. 1.18, FG860/900/1156 package information, and additional DLL,
Select RAM and SelectI/O information.
Added Delay Measurement Methodology table, updated SelectI/O section, Figures 30, 54,
& 55, text explaining Table 5, T
BYP
values, buffered Hex Line info, p. 8, I/O Timing
Measurement notes, notes for Tables 15, 16, and corrected F1156 pinout table footnote
references.
Updated pinout tables, V
CC
page 20, and corrected Figure 20.
Correction to table on p. 22.
•
•
•
•
•
•
•
•
•
•
•
•
Numerous minor edits.
Data sheet upgraded to Preliminary.
Preview -8 numbers added to
Virtex-E Electrical Characteristics
tables.
Reformatted entire document to follow new style guidelines.
Changed speed grade values in tables on pages 35-37.
Min values added to
Virtex-E Electrical Characteristics
tables.
XCV2600E and XCV3200E numbers added to
Virtex-E Electrical Characteristics
tables (Module 3).
Corrected user I/O count for XCV100E device in Table 1 (Module 1).
Changed several pins to “No Connect in the XCV100E“ and removed duplicate V
CCINT
pins in Table ~ (Module 4).
Changed pin J10 to “No connect in XCV600E” in Table 74 (Module 4).
Changed pin J30 to “VREF option only in the XCV600E” in Table 74 (Module 4).
Corrected pair 18 in Table 75 (Module 4) to be “AO in the XCV1000E, XCV1600E“.
Revision
2/29/00
5/23/00
7/10/00
1.3
1.4
1.5
8/1/00
9/20/00
1.6
1.7
Module 1 of 4
4
www.xilinx.com
1-800-255-7778
DS022-1 (v2.2) November 9, 2001
Preliminary Product Specification
R
Virtex™-E 1.8 V Field Programmable Gate Arrays
Date
11/20/00
Version
1.8
•
•
•
•
•
•
•
Revision
Upgraded speed grade -8 numbers in
Virtex-E Electrical Characteristics
tables to
Preliminary.
Updated minimums in Table 13 and added notes to Table 14.
Added to note 2 to
Absolute Maximum Ratings.
Changed speed grade -8 numbers for T
SHCKO32
, T
REG
, T
BCCS
, and T
ICKOF
.
Changed all minimum hold times to –0.4 under
Global Clock Setup and Hold for
LVTTL Standard, with DLL.
Revised maximum T
DLLPW
in -6 speed grade for
DLL Timing Parameters.
Changed GCLK0 to BA22 for FG860 package in Table 46.
Revised footnote for Table 14.
Added numbers to
Virtex-E Electrical Characteristics
tables for XCV1000E and
XCV2000E devices.
Updated Table 27 and Table 78 to include values for XCV400E and XCV600E devices.
Revised Table 62 to include pinout information for the XCV400E and XCV600E devices
in the BG560 package.
Updated footnotes 1 and 2 for Table 76 to include XCV2600E and XCV3200E devices.
Updated numerous values in
Virtex-E Switching Characteristics
tables.
Converted data sheet to modularized format. See the
Virtex-E Data Sheet
section.
Updated the
Virtex-E Device/Package Combinations and Maximum I/O
table to
show XCV3200E in the FG1156 package.
Minor edits.
2/12/01
1.9
•
•
•
•
•
4/2/01
10/25/01
11/09/01
2.0
2.1
2.2
•
•
•
•
Virtex-E Data Sheet
The Virtex-E Data Sheet contains the following modules:
•
•
DS022-1, Virtex-E 1.8V FPGAs:
Introduction and Ordering Information (Module 1)
•
•
DS022-3, Virtex-E 1.8V FPGAs:
DC and Switching Characteristics (Module 3)
DS022-2, Virtex-E 1.8V FPGAs:
Functional Description (Module 2)
DS022-4, Virtex-E 1.8V FPGAs:
Pinout Tables (Module 4)
DS022-1 (v2.2) November 9, 2001
Preliminary Product Specification
www.xilinx.com
1-800-255-7778
Module 1 of 4
5
京公网安备 11010802033920号
EEWORLD
