80C51FA/83C51FA
EVENT-CONTROL CHMOS SINGLE-CHIP
8-BIT MICROCONTROLLER
Automotive
Y
Y
Extended Automotive
Temperature Range
(
b
40 C to
a
125 C Ambient)
High Performance CHMOS Process
Three 16-Bit Timer/Counters
- Timer 2 is an Up/Down
Timer/Counter
Programmable Counter Array with:
- High Speed Output
- Compare/Capture
- Pulse Width Modulator
- Watchdog Timer Capabilities
8K On-Chip ROM
256 Bytes of On-Chip Data RAM
Boolean Processor
32 Programmable I/O Lines
7 Interrupt Sources
Programmable Serial Channel with:
- Framing Error Detection
- Automatic Address Recognition
TTL and CMOS Compatible Logic
Levels
64K External Program Memory Space
64K External Data Memory Space
MCS 51 Microcontroller Fully
Compatible Instruction Set
Power Saving Idle and Power Down
Modes
ONCE (On-Circuit Emulation) Mode
Available in PLCC and PDIP Packages
(See Packaging Specification, Order
231369)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Available in 12 MHz and 16 MHz
Versions
MEMORY ORGANIZATION
PROGRAM MEMORY: Up to 8 Kbytes of the program memory can reside in the on-chip ROM. In addition the
device can address up to 64K of program memory external to the chip.
DATA MEMORY: This microcontroller has a 256 x 8 on-chip RAM. In addition it can address up to 64 Kbytes of
external data memory.
The Intel 80C51FA/83C51FA is a single-chip control oriented microcontroller which is fabricated on Intel's
CHMOS III (83C51FA) ROM technology. For the remainder of this datasheet references to the ROMless
(80C51FA) and ROM (83C51FA) versions will be denoted as 83C51FA. Being a member of the MCS 51
microcontroller family, the 83C51FA uses the same powerful instruction set, has the same architecture, and is
pin-for-pin compatible with the existing MCS 51 microcontroller products. The 83C51FA is an enhanced
version of the 87C51. It's added features make it an even more powerful microcontroller for applications that
require Pulse Width Modulation, High Speed I/O, and up/down counting capabilities such as brake and
traction control. It also has a more versatile serial channel that facilitates multi-processor communications.
NOTICE:
This datasheet contains information on products in full production. Specifications within this datasheet
are subject to change without notice. Verify with your local Intel sales office that you have the latest
datasheet before finalizing a design.
Other brands and names are the property of their respective owners.
Information in this document is provided in connection with Intel products. Intel assumes no liability whatsoever, including infringement of any patent or
copyright, for sale and use of Intel products except as provided in Intel's Terms and Conditions of Sale for such products. Intel retains the right to make
changes to these specifications at any time, without notice. Microcomputer Products may have minor variations to this specification known as errata.
COPYRIGHT ©INTEL CORPORATION, 2004
Order Number: 270501-008
June 2004
AUTOMOTIVE 80C51FA/83C51FA
270501 ±1
Figure 1. 83C51FA Block Diagram
2
AUTOMOTIVE 80C51FA/83C51FA
temperature range of 0
°
C to 70
°
C ambient. With the
extended temperature range option, operational
characteristics are guaranteed over the temperature
range of -40 °C to + 85°C ambient. For the automo-
tive temperature range option, operational charac-
teristics are guaranteed over the temperature range
of
-40°C to +125°C
ambient.
As shown in Figure 2 temperature, burn-in, and
package options are identified by a one- or two-letter
prefix to the part number.
80C51FA/83C51FA PRODUCT
OPTIONS
Intel’s extended and automotive temperature range
products are designed to meet the needs of those
applications whose operating requirements exceed
commercial standards.
With the commercial standard temperature range,
operational characteristics are guaranteed over the
x
x
x
270501 – 2
Figure 2. MCS
®
51 Microcontroller Product Family Nomenclature
Table 1. Temperature Options
Temperature
Classification
Extended
Automotive
Temperature
Designation
T
L
A
B
Operating
Temperature
°
C Ambient
-
40 to
+
85
-
40 to
+
85
-
40 to
+
125
-
40 to
+
125
Burn-In
Options
Standard
Extended
Standard
Extended
3
AUTOMOTIVE 80C51FA/83C51FA
PIN DESCRIPTIONS
V
CC
:
Supply voltage.
V
SS
:
Circuit ground.
Port 0:
Port 0 is an 8-bit, open drain, bidirectional
I/O port. As an output port each pin can sink several
LS TTL inputs. Port 0 pins that have 1's written to
them float, and in that state can be used as high-im-
pedance inputs.
Port 0 is also the multiplexed low-order address and
data bus during accesses to external Program and
Data Memory. In this application it uses strong inter-
nal pullups when emitting1's, and can source and
sink several LS TTL inputs.
Port 0 outputs the code bytes during program verifi-
cation. External pullup resistors are required during
program verification.
Port 1:
Port 1 is an 8-bit bidirectional I/O port with
internal pullups. The Port 1 output buffers can drive
LS TTL inputs. Port 1 pins that have 1's written to
them are pulled high by the internal pullups, and in
that state can be used as inputs. As inputs, Port 1
pins that are externally pulled low will source current
(I
IL
, on the datasheet) because of the internal pull-
ups.
In addition, Port 1 serves the functions of the follow-
ing special features of the 83C51FA:
Port Pin
P1.0
P1.1
P1.2
P1.3
P1.4
P1.5
P1.6
P1.7
Alternate Function
T2 (External Count Input to Timer/
Counter 2)
T2EX (Timer/Counter 2 Capture/
Reload Trigger and Direction Control)
ECI (External Count Input to the PCA)
CEX0 (External I/O for Compare/
Capture Module 0)
CEX1 (External I/O for Compare/
Capture Module 1)
CEX2 (External I/O for Compare/
Capture Module 2)
CEX3 (External I/O for Compare/
Capture Module 3)
CEX4 (External I/O for Compare/
Capture Module 4)
Port 2:
Port 2 is an 8-bit bidirectional I/O port with
internal pullups. The Port 2 output buffers can drive
LS TTL inputs. Port 2 pins that have 1's written to
them are pulled high by the internal pullups, and in
that state can be used as inputs. As inputs, Port 2
pins that are externally pulled low will source current
(I
IL
, on the datasheet) because of the internal pull-
ups.
Port 2 emits the high-order address byte during
fetches from external Program Memory and during
accesses to external Data Memory that use 16-bit
addresses (MOVX DPTR). In this application it
uses strong internal pullups when emitting 1's. Dur-
ing accesses to external Data Memory that use 8-bit
Pad (PLCC)
Pin (PDIP)
270501 ±3
Do not connect reserved pins.
270501 ±4
Diagrams are for pin reference only. Package sizes are not to scale.
Figure 3. Pin Connections
4
AUTOMOTIVE 80C51FA/83C51FA
addresses (MOVX Ri), Port 2 emits the contents of
the P2 Special Function Register.
Port 3:
Port 3 is an 8-bit bidirectional I/O port with
internal pullups. The Port 3 output buffers can drive
LS TTL inputs. Port 3 pins that have 1's written to
them are pulled high by the internal pullups, and in
that state can be used as inputs. As inputs, Port 3
pins that are externally pulled low will source current
(I
IL
, on the datasheet) because of the pullups.
Port 3 also serves the functions of various special
features of the MCS 51 microcontroller family, as
listed below:
Port Pin
P3.0
P3.1
P3.2
P3.3
P3.4
P3.5
P3.6
P3.7
Alternate Function
RXD (serial input port)
TXD (serial output port)
INT0 (external interrupt 0)
INT1 (external interrupt 1)
T0 (Timer 0 external input)
T1 (Timer 1 external input)
WR (external data memory write strobe)
RD (external data memory read strobe)
EA/V
PP
:
External Access enable. EA must be
strapped to V
SS
in order to enable the device to
fetch code from external Program Memory locations
0000H to 0FFFFH. Note, however, that if either of
the Program Lock bits are programmed, EA will be
internally latched on reset.
EA should be strapped to V
CC
for internal program
executions.
XTAL1:
Input to the inverting oscillator amplifier.
XTAL2:
Output from the inverting oscillator amplifi-
er.
OSCILLATOR CHARACTERISTICS
XTAL1 and XTAL2 are the input and output, respec-
tively, of a inverting amplifier which can be config-
ured for use as an on-chip oscillator, as shown in
Figure 4. Either a quartz crystal or ceramic resonator
may be used. More detailed information concerning
the use of the on-chip oscillator is available in Appli-
cation Note AP-155, ``Oscillators for Microcontrol-
lers.''
To drive the device from an external clock source,
XTAL1 should be driven, while XTAL2 floats, as
shown in Figure 5. There are no requirements on the
duty cycle of the external clock signal, since the in-
put to the internal clocking circuitry is through a di-
vide-by-two flip-flop, but minimum and maximum
high and low times specified on the datasheet must
be observed.
An external oscillator may encounter as much as a
100 pF load at XTAL1 when it starts up. This is due
to interaction between the amplifier and its feedback
capacitance. Once the external signal meets the V
IL
and V
IH
specifications the capacitance will not ex-
ceed 20 pF.
RESET:
Reset input. A high on this pin for two ma-
chine cycles while the oscillator is running resets the
device. An internal pulldown resistor permits a pow-
er-on reset with only a capacitor connected to V
CC
.
ALE/PROG
:
Address Latch Enable output pulse for
latching the low byte of the address during accesses
to external memory.
In normal operation ALE is emitted at a constant
rate of
the oscillator frequency, and may be used
for external timing or clocking purposes. Note, how-
ever, that one ALE pulse is skipped during each ac-
cess to external Data Memory.
Throughout the remainder of this datasheet, ALE will
refer to the signal coming out of the ALE/PROG pin,
and the pin will be referred to as the ALE/PROG pin.
PSEN:
Program Store Enable is the read strobe to
external Program Memory.
When the 83C51FA is executing code from external
Program Memory, PSEN is activated twice each ma-
chine cycle, except that two PSEN activations are
skipped during each access to external Data Memo-
ry.
270501 ±5
C1, C2
e
30 pF
g
10 pF for Crystals
For Ceramic Resonators, contact resonator manufacturer.
Figure 4. Oscillator Connections
5
京公网安备 11010802033920号
EEWORLD
