74AUP1G132 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > 74AUP1G132

Preview

74AUP1G132: DescriptionLow-power 2-input NAND Schmitt trigger; File Size78KB，18 Pages; ManufacturerNXP; Websitehttps://www.nxp.com

Download Datasheet Compare View All

74AUP1G132 Overview

Low-power 2-input NAND Schmitt trigger

Preview

Download Datasheet

View All

74AUP1G132

Low-power 2-input NAND Schmitt trigger

Rev. 02 — 15 June 2009

Product data sheet

1. General description

The 74AUP1G132 provides the single 2-input NAND Schmitt trigger function which accept

standard input signals. They are capable of transforming slowly changing input signals

into sharply deﬁned, jitter-free output signals.

This device ensures a very low static and dynamic power consumption across the entire

range from 0.8 V to 3.6 V.

This device is fully speciﬁed for partial Power-down applications using I

OFF

The I

OFF

circuitry disables the output, preventing the damaging backﬂow current through

the device when it is powered down.

The inputs switch at different points for positive and negative-going signals. The difference

between the positive voltage V

T+

and the negative voltage V

T−

is deﬁned as the input

hysteresis voltage V

2. Features

Wide supply voltage range from 0.8 V to 3.6 V

High noise immunity

ESD protection:

HBM JESD22-A114E Class 3A exceeds 5000 V

MM JESD22-A115-A exceeds 200 V

CDM JESD22-C101C exceeds 1000 V

Low static power consumption; I

= 0.9

µA

(maximum)

Latch-up performance exceeds 100 mA per JESD 78 Class II

Inputs accept voltages up to 3.6 V

Low noise overshoot and undershoot < 10 % of V

OFF

circuitry provides partial Power-down mode operation

Multiple package options

Speciﬁed from

−40 °C

to +85

°C

and

−40 °C

to +125

°C

3. Applications

Wave and pulse shaper

Astable multivibrator

Monostable multivibrator.

74AUP1G132 Related Products

	74AUP1G132	74AUP1G132GM	74AUP1G132GF	74AUP1G132GW
Description	Low-power 2-input NAND Schmitt trigger	Low-power 2-input NAND Schmitt trigger	Low-power 2-input NAND Schmitt trigger	Low-power 2-input NAND Schmitt trigger
Source Url Status Check Date	-	2013-06-14 00:00:00	2013-06-14 00:00:00	2013-06-14 00:00:00
Is it lead-free?	-	Lead free	Lead free	Lead free
Is it Rohs certified?	-	conform to	conform to	conform to
Maker	-	NXP	NXP	NXP
Parts packaging code	-	SON	SON	TSSOT
package instruction	-	1 X 1.45 MM, 0.50 MM HEIGHT, PLASTIC, MO-252, SOT-886, SON-6	1 X 1 MM, 0.50 MM HEIGHT, PLASTIC, SOT-891, SON-6	1.25 MM, PLASTIC, MO-203, SC-88A, SOT353-1, TSSOP-5
Contacts	-	6	6	5
Reach Compliance Code	-	compli	compli	compli
series	-	AUP/ULP/V	AUP/ULP/V	AUP/ULP/V
JESD-30 code	-	R-PDSO-N6	S-PDSO-N6	R-PDSO-G5
JESD-609 code	-	e3	e3	e3
length	-	1.45 mm	1 mm	2.05 mm
Load capacitance (CL)	-	30 pF	30 pF	30 pF
Logic integrated circuit type	-	NAND GATE	NAND GATE	NAND GATE
MaximumI(ol)	-	0.0017 A	0.0017 A	0.0017 A
Humidity sensitivity level	-	1	1	1
Number of functions	-	1	1	1
Number of entries	-	2	2	2
Number of terminals	-	6	6	5
Maximum operating temperature	-	125 °C	125 °C	125 °C
Minimum operating temperature	-	-40 °C	-40 °C	-40 °C
Package body material	-	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY
encapsulated code	-	VSON	VSON	TSSOP
Encapsulate equivalent code	-	SOLCC6,.04,20	SOLCC6,.04,14	TSSOP5/6,.08
Package shape	-	RECTANGULAR	SQUARE	RECTANGULAR
Package form	-	SMALL OUTLINE, VERY THIN PROFILE	SMALL OUTLINE, VERY THIN PROFILE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Celsius)	-	260	260	260
power supply	-	1.2/3.3 V	1.2/3.3 V	1.2/3.3 V
Prop。Delay @ Nom-Su	-	27.9 ns	27.9 ns	27.9 ns
propagation delay (tpd)	-	27.9 ns	27.9 ns	27.9 ns
Certification status	-	Not Qualified	Not Qualified	Not Qualified
Schmitt trigger	-	YES	YES	YES
Maximum seat height	-	0.5 mm	0.5 mm	1.1 mm
Maximum supply voltage (Vsup)	-	3.6 V	3.6 V	3.6 V
Minimum supply voltage (Vsup)	-	0.8 V	0.8 V	0.8 V
Nominal supply voltage (Vsup)	-	1.1 V	1.1 V	1.1 V
surface mount	-	YES	YES	YES
technology	-	CMOS	CMOS	CMOS
Temperature level	-	AUTOMOTIVE	AUTOMOTIVE	AUTOMOTIVE
Terminal surface	-	Tin (Sn)	Tin (Sn)	Tin (Sn)
Terminal form	-	NO LEAD	NO LEAD	GULL WING
Terminal pitch	-	0.5 mm	0.35 mm	0.65 mm
Terminal location	-	DUAL	DUAL	DUAL
Maximum time at peak reflow temperature	-	30	30	30
width	-	1 mm	1 mm	1.25 mm
Base Number Matches	-	1	1	1

Recommended Resources

Circuit diagram of sound-generating logic pen using CD4011

Displacement sensor amplification circuit diagram

Microprocessor power supply circuit diagram using two DC and DC converters

CA1524 push-pull converter circuit diagram

RC low frequency oscillator

555 light controlled timing street light circuit

Which single chip microcomputer of MSP430 will be used in the automatic calibration instrument of the indicator?: Hey guys, does anyone know which MSP430 microcontroller is used in the automatic calibration instrument of the indicator? If you know, please contact me at 0755-28168418 QQ: 754181079...; susannacsp Microcontroller MCU

Embedded DSP Development---Dm642 Video Port Output: void VP1_EDMA(int displayMode,unsigned int w,unsigned int h) {unsigned int i=0,k=0;EDMA_Handle handle;EDMA_Handle handle2;EDMA_Config myEdmaConfig;handle= EDMA_open(EDMA_CHA_VP1EVTYA, EDMA_OPEN_RESET)...; Jacktang DSP and ARM Processors

The touch screen cannot be calibrated~~: Hello everyone, I have a new problem. The touch screen cannot be calibrated. After calibrating, I start calibrating again and again... The prompt is Maximum Allowed Error 7: Maximum error 60890 exceed...; shjdzgy Embedded System

Brushed DC motor double closed loop control: I will always ask for help online, I hope everyone can help me. I am now starting to learn motor control, and I want to make a double closed loop of a DC motor first. I hope you can teach me....; 张锋 Microcontroller MCU

LCD12864 cannot display the required characters and displays garbled characters (I am using stc12c5a60s2): #include "STC12C5A60S2.h" #include "12864.h" #include "math.h" #include "common.h" #define LCD12864Para_dataplay P1 sbit RS = P3^2; sbit RW = P3^1; sbit EN = P3 ^0; void delay(uint i) //Delay function...; 虎老头 MCU

[Urgent!] OV9650 camera video transmission problem: At the beginning of the program, use m_hled=CreateFile(_T("CIS1:"),GENERIC_READ|GENERIC_WRITE,0,NULL,OPEN_EXISTING,0,0);//Open the driver ret = DeviceIoControl(m_hled,CAM_IOCTL_SAMSUNG_PREVIEW_START,N...; llc2007 Embedded System

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components