specifications
ST Fiber Optic Connectors shall be compliant
with TIA FOCIS-2. ST connectors shall be
field installable in one module space. The
fibers shall terminate in 2.5mm ferrules and
have typical insertion loss of less than 0.3dB
per connector.
NETWORK CONNECTIVITY GROUP
™
SPEC SHEET
ST Fiber Optic Connector
technical information
Fiber compatibility:
62.5/125µm and 50/125µm multimode, 9/125µm singlemode
Fiber cable types:
3.0mm jacketed or 900µm buffered
Ferrule type:
Insertion loss:
Return loss:
Zirconia ceramic, pre-radiused
Less than 0.3dB typical
Greater than 20dB multimode, 40dB singlemode
Multimode 900µm Tight-Buffered or
3mm Jacketed Fiber
Black boot:
Red boot:
FSTMBL
FSTMRD
Singlemode 900µm Tight-Buffered
or 3mm Jacketed Fiber
Blue boot:
Adapter Modules
ST adapter
module:
CMST**
FSTSBU
key features and ...benefits
Proven 2.5mm ceramic
ferrules
Robust design
TIA standardization
Anaerobic adhesive
Uses standard termination procedures and provides strength
and reliability
Protects fibers from mechanical and environmental stress
FOCIS-2 (ST) interface approved at the TIA, required by
EIA/TIA-568-B.3
Decreases termination time and reduces installed cost
Multimode Patch Cords
O
PTI
-J
ACK
O
PTI
-J
ACK
duplex
plug to ST :
Simplex ST to ST:
Duplex ST to ST:
Duplex ST to SC:
O
PTI
-J
ACK
duplex
jack to ST:
Duplex ST to FC:
F6D6P-2M‡
F6S2-2M‡
F6D2-2M‡
F6D2-3M‡
F6D6J-2M2
(
Only available in
2m)
F6D2-4M‡
Singlemode Patch Cords
O
PTI
-J
ACK
O
PTI
-J
ACK
duplex
plug to ST:
Simplex 900µm
buffered ST pigtails:
Simplex ST to ST:
O
PTI
-J
ACK
duplex
jack to ST:
Duplex ST to ST:
Duplex ST to SC:
Duplex ST to FC:
Termination Tooling
Termination kit:
FJKITG
F9D6P-2M‡
F9B2-NM‡
F9S2-2M‡
F9D6J-2M2
(Only available in
2m)
applications
PANDUIT
ST Fiber Optic Connectors utilize
an industry standard design for equipment
cross-connects or interconnects. These
connectors are field installable with the same
easy to use anaerobic adhesive and polishing
procedures as the
O
PTI
-J
ACK
®
Fiber Optic
Connector. ST Fiber Optic Connectors are
widely used in fiber optic backbone and
horizontal applications for high speed data
transmissions. Multimode connectors provide
"ST" is a trademark of Lucent Technologies
a low cost, easy to terminate solution for
fiber-to-the-desk and horizontal applications.
Singlemode connectors offer ultimate data
transmission capabilities for high speed
backbone applications.
PANDUIT
ST adapter
modules are completely modular to allow use
with other connectors for multimedia
solutions. Modules are
M
INI
-C
OM
®
compatible
for use in all patch panels, faceplates and
surface mount boxes.
F9D2-2M‡
F9D2-3M‡
F9D2-4M‡
installer tip
Anaerobic adhesive speeds termination
time resulting in reduced installed cost.
Singlemode connectors also
require:
Polishing film:
FPF1-V
(
5-sheet pack)
Polishing cloth:
FPCL-Q
(25-sheet pack)
Polishing slurry:
**Substitute:
FPSL
EI=Electric Ivory
WH=White
BL=Black
IW=Off White
IG=International Gray
Visit our website at: www.panduit.com/ncg
Please contact factory for additional
patch cord configurations
‡Available in 1,2,3 and 10 meters
ST Fiber Optic Connector
ST Fiber Optic Connector Performance
TIA 455
3
6
13
21
34
107
ISO/IEC 874-1
4.5.22
4.5.4
4.4.1,2
4.5.32
4.4.7
—
Description
Thermal Cycling
Cable Retention
Visual, Mechanical
Durability
Insertion Loss
Return Loss
Test Procedure and Required Performance
-40°C to 75°C for 5 cycles; <0.3dB additional loss
Apply 7.5lb. Load (0.5lb for buffered fiber) for 5 seconds
0° angle; <0.3dB additional loss
Inspection and mechanical dimensions according to
FOCIS-2 (ST)
Mate/unmate connectors for 500 cycles, <0.3dB additional loss
<0.3dB typical
20dB minimum return loss (multimode) and 40dB minimum
return loss (singlemode)
CMST**
1.56 REF (3.9)
900µm BOOT
3mm BOOT
.71
(18.1
)
2.05 REF
(5.2
)
.61
(15.4)
1.37
(34.8)
Dimensions are in inches (Dimensions in parentheses are metric)
Our products are warranted to be free from defects in material and workmanship at the time of sale but our
obligation under this warranty is limited to the replacement of any product proved to be defective within 6
months (for product) or 90 days (for tools) from the date of delivery. Tool warranty is void if Panduit tools
are modified, altered or misused in any way. Use of Panduit tooling with any product other than the specified
Panduit products for which the tool was designed, constitutes misuse. Before using, user shall determine
the suitability of the product for his intended use and user assumes all risk and liability whatsoever in
connection therewith.
This warranty is made in lieu of and excludes all other warranties, expressed or implied. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE ARE SPECIFICALLY
EXCLUDED. Neither seller nor manufacturer shall be liable for any other injury, loss or damage whether direct
or consequential, arising out of the use of, or the inability to use, the product.
The information contained in this literature is based on our experience to date and is believed to be reliable.
It is intended as a guide for use by persons having technical skill at their own discretion and risk. We do not
guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein
are for reference purposes only. For specific dimensional requirements consult the factory. This publication is
not be taken as a license to operate under, or a recommendation to infringe any existing patents. This
supersedes and voids all previous literature, etc.
™
NETWORK CONNECTIVITY GROUP
WORLD HEADQUARTERS
PANDUIT CORP.
Tinley Park, Illinois, USA
Phone: 888-506-5400, ext. 6914
708-532-1800, ext. 6914
Fax: 708-460-2897
Email: info@panduit.com
Internet: www.panduit.com/ncg
ASIAN HEADQUARTERS
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
Phone: (65) 379 6700
For Pricing and Further Information —
Contact your local authorized
PANDUIT P
AN
-N
ET
™
Distributor or Sales Office
PANDUIT CORP.
Japan Branch
Phone (81) (3) 3767-7011
PANDUIT MEXICO/LATIN AMERICA
& CARIBBEAN
Phone: (52) 3 666-2501
PANDUIT (AUST.) PTY. LTD.
Phone: (61) 3-9794 9020
PANDUIT CANADA
Div. of
PANDUIT CORP.
Markham, Ontario
Phone: 905-475-6922
EUROPEAN HEADQUARTERS
PANDUIT EUROPE LTD.
London, UK
Phone: 44(0) 208-601-7200
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
© Panduit Corp. 2000
ALL RIGHTS RESERVED
SA117N245A-OP
Printed in U.S.A.
MCU
京公网安备 11010802033920号
EEWORLD
