Integrated Device Technology, Inc. reserves the right to make changes to its products or specifications at any time, without notice, in order to improve design or performance
and to supply the best possible product. IDT does not assume any responsibility for use of any circuitry described other than the circuitry embodied in an IDT product. The
Company makes no representations that circuitry described herein is free from patent infringement or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent, patent rights or other rights, of Integrated Device Technology, Inc.
LIFE SUPPORT POLICY
Integrated Device Technology's products are not authorized for use as critical components in life support devices or systems unless a specific written agreement pertaining to
such intended use is executed between the manufacturer and an officer of IDT.
1. Life support devices or systems are devices or systems which (a) are intended for surgical implant into the body or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user.
2. A critical component is any components of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device
or system, or to affect its safety or effectiveness.
LONG HAUL SLIC
ADVANCE INFORMATION
IDT821611
FEATURES
!
!
!
!
!
!
!
!
!
!
!
!
!
DESCRIPTION
The IDT821611 is a long haul Subscriber Line Interface Circuit. It
implements the basic telephone line interface functions such as battery
feeding, impedance matching, off-hook detection and ring-trip detection.
The IDT821611 allows battery feeding between
−19
V and
−58
V
and has the capability for driving long loops. It provides polarity reversal
function that will save an external relay in comparison with the
IDT821621. The architecture of operating the SLIC in different states
according to different loop states minimizes the system power
dissipation.
This long haul SLIC provides a cost-effective solution for PBX and
Two-wire impedance set by single external impedance
Programmable constant-current feed
Programmable loop-detect threshold
Programmable ring-trip detect threshold
+3.3 V / +5 V compatible power supply
No
−5
V supply required
On-chip Thermal Management (TMG)
Three on-chip relay drivers and relay snubbers, 1 ringing and 2
general purpose
Package available: 32 pin PLCC
FUNCTIONAL BLOCK DIAGRAM
TMG
Relay Driver
Relay Driver
A (TIP)
Ring Relay Driver
HPA
Digital
Interface
Two-Wire
Interface
Signal
Transmission
HPB
Off-hook
Detector
B (RING)
Power Feed
Controller
DA
DB
VBAT
BGND
VCC
The IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc.
RYOUT2
RYOUT1
RINGOUT
D1
D2
C1
C2
C3
DET
VTX
RSN
RD
RDC
CAS
Ring-trip
Detector
VBREF
AGND
1
2003 Integrated Device Technology, Inc.
*Notice: The information in this document is subject to change without notice
February 13, 2003
DSC-6236/-
TABLE OF CONTENTS
Features ....................................................................................................................................................................................................................... 1
SLIC States Control ......................................................................................................................................................................................... 7
Relay Drivers Control ....................................................................................................................................................................................... 8
DC Feeding ...................................................................................................................................................................................................... 8
Receive Gain Setting ....................................................................................................................................................................................... 9
DC Electrical Characteristics ................................................................................................................................................................................... 10
AC Electrical Characteristics ................................................................................................................................................................................... 11
Test Circuits .............................................................................................................................................................................................................. 15
Ordering Information ................................................................................................................................................................................................ 19
Table of Contents
2
*Notice: The information in this document is subject to change without notice
DC Feeding Characteristics ................................................................................................................................................................... 8
DC Feed Programming Circuit............................................................................................................................................................... 8
Two-Wire AC Input Impedance Programming Network ....................................................................................................................... 11
Two-Wire Return Loss ......................................................................................................................................................................... 15
Four-Wire Longitudinal Signal Generation........................................................................................................................................... 16
Two-to-Four Wire Gain ........................................................................................................................................................................ 16
Four-to-Two Wire Gain and Four-to-Four Wire Gain ........................................................................................................................... 17
The STBLESensor application is available for Android and iOS and displays data exported by BLE devices using the BlueST protocol. The STBLESensor application displays different panels depending on the...
littleshrimpST Sensors & Low Power Wireless Technology Forum
[img]http://cache.ourdev.cn/bbs_upload489681/files_28/ourdev_551359.jpg[/img] This post was last edited by Feiling Embedded on 2010-4-29 08:38 For other TE6410 information, please refer to www.witech....
[align=left][color=#333333][color=#666666][size=14px] The wireless remote control switch system can realize a design of long-distance lighting control, which consists of two parts: the transmitting sy...
[align=left][color=#000] As we all know, MSP430 is famous for its ultra-low power consumption. However, many users have reported that in actual applications, when measuring the power consumption of MS...
Urgent help "Research on speech coding and decoding technology based on DSP" needs to use G.711 protocol. Thank you all for your help! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !...
I am using DSK6416 for output.I use EMDA to transmit datathrough EMIF to external CE2 space. I useasynchronous transmission .However, the read and write speeds set in the CE2 control register are all ...
ST Sensors & Low Power Wireless Technology Forum
京公网安备 11010802033920号
EEWORLD
