CLASS B+ PRODUCTS
Q-TECH
CORPORATION
Features
CRYSTAL CLOCK OSCILLATORS
3.3 to 5.0Vdc - 450kHz to 85MHz
• Made in the USA
• ECCN: EAR99
• DFARS 252-225-7014 Compliant:
Electronic Component Exemption
• USML Registration # M17677
• Broad frequency range from 450kHz to 85MHz
• Rugged 4 point mount design for high shock and
vibration
• ACMOS, HCMOS, TTL or LVHCMOS logic
• Tri-State Output Option (D)
• Hermetically sealed ceramic SMD package
• Fundamental and 3rd Overtone designs
• Low phase noise
• Custom designs available
• Q-Tech does not use pure lead or pure tin in its
products
• RoHS compliant
Introduction
The commercial satellite industry has requested that smaller, lighter, less
expensive oscillator products with shorter lead times be made available
for minisatellites, microsatellites, nanosatellites and picosatellites. In
addition some newer satellite programs are being created for short term
space lives and do not need oscillators with the assurance of a 15-20 year
life span.
Q-Tech Corporation, the industry leader in both Class B and Space Rated
hybrid crystal oscillators is pleased to advise that we have created a
special category of product designated as Class B+ for these applications.
See website for link to RAD test data.
We have created these Class B+ products for the discriminate user’s
applications and needs using our small form MIL QPL Class B oscillators.
You, the customer, can now pick and choose the style of clock oscillator
you wish, whether you want a 100kRad (Si) High Dose Tolerant NSC
54ACT3301 (FACT) or a standard Class B qualified die, a swept quartz
space qualified crystal or a Class B cultured quartz crystal and/or a
combination thereof in an oscillator product that otherwise utilizes Class
B qualified passive devices. Q-Tech offers several different screening
options to allow you to choose the screening plan that best suits your
needs.
Q-Tech Corporation does not guarantee the specific radiation hardness
of its Class B+ products but will provide the necessary active device
component traceability to allow you to make your own decision and do
your own testing and evaluation based upon your specific needs and
requirements.
Initially we will begin this product offering in three of our leading
miniature clock oscillator product lines: QT78 (M55310/27, /28 & /30) ,
QT88 (M55310/33 & /34) and QT92 (M55310/37 & /38). Product will
be available in 5.0 and 3.3 Vdc from 450kHz to 85MHZ. Please consult
the factory if you would like to know if this option is available in other
standard Q-Tech Class B product lines or if you have any other specific
oscillator needs that we can help you with.
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-t ec h.com
Class B+ Products (Revision -, April 2009)
1
CLASS B+ PRODUCTS
Electrical Characteristics
CORPORATION
Q-TECH
CRYSTAL CLOCK OSCILLATORS
3.3 to 5.0Vdc - 450kHz to 85MHz
QTX78AC
QTX88AC
QTX92AC
QTX78HC
QTX88HC
QTX92HC
QTX78T
QTX88T
QTX92T
QTX78L
QTX88L
QTX92L
Parameters
Output frequency range (Fo)
Supply voltage (Vdd)
QTX78
QTX88 & QTX92
500kHz — 85.000MHz
5.0Vdc ± 10%
450kHz — 85.000MHz
500kHz — 70.000MHz
3.3Vdc ± 10%
450kHz — 70.000MHz
Maximum Applied Voltage (Vdd max.)
Operating temperature (Topr)
Frequency stability (∆F/∆T)
Storage temperature (Tsto)
Operating supply current
(Idd) (No Load)
See Option codes
-62ºC to + 125ºC
20 mA max. -
25 mA max. -
35 mA max. -
45 mA max. -
450kHz ~ < 16MHz
16MHz ~ < 32MHz
32MHz ~ < 60MHz
60MHz ~ ≤ 85MHz
See Option codes
-0.5 to +7.0Vdc
3 mA max. - 450kHz
6 mA max. - 500kHz
10 mA max. - 16MHz
20 mA max. - 32MHz
30 mA max. - 60MHz
~
~
~
~
~
< 500kHz
< 16MHz
< 32MHz
< 60MHz
< 70MHz
Symmetry
(50% of ouput waveform or 1.4Vdc for TTL)
Rise and Fall times (with typical load)
6ns max. - Fo < 30MHz
3ns max. - Fo ≥ 30 - 85MHz
(between 10% to 90%)
50pF max. or 10TTL
for (Fo < 60MHz)
30pF max. or 6TTL
for (Fo ≥ 60MHz)
15pF // 10kohms
45/55% max. - 450kHz ~ < 15MHz
40/60% max. - 15 ~ ≤ 85MHz
(Tighter symmetry available)
7ns max. - Fo < 30MHz
3ns max. - Fo ≥ 30 - 85MHz
(between 10% to 90%)
15pF // 10kohms
(2LSTTL)
5ns max. - Fo < 30MHz
3ns max. - Fo ≥ 30 - 85MHz
(between 0.8V to 2.0V)
10TTL (Fo < 60MHz)
6TTL (Fo ≥ 60MHz)
45/55% max. - 450kHz ~ < 15MHz
40/60% max. - 15 ~ ≤ 70MHz
(Tighter symmetry available)
6ns max. - 450kHz ~ < 40MHz
3ns max. - 40 ~ ≤ 70MHz
(between 10% to 90%)
(30pF max. for F ≤ 50MHz)
15pF // 10kohms
Output Load
Start-up time (Tstup)
Output voltage (Voh/Vol)
Output Current (Ioh/Iol)
± 24mA max.
0.9 x Vdd min.; 0.1 x Vdd max.
5ms max.
± 8mA max.
VIH ≥ 2.2V Oscillation;
VIL ≤ 0.8V High Impedance
2.4V min.; 0.4V max.
-1.6 mA/TTL
+40 µA/TTL
0.9 x Vdd min.; 0.1 x Vdd max.
± 4mA max.
Enable/Disable Tristate function Pin 1
Jitter RMS 1σ (at 25ºC)
Aging (at 70ºC)
8ps typ. - < 40MHz
5ps typ. - ≥ 40MHz
± 5ppm max. first year / ± 2ppm max. per year thereafter
-
Tel: 310-836-7900 - Fax: 310-836-2157
-
15ps typ. - < 40MHz
8ps typ. - ≥ 40MHz
Q-TECH Corporation
-
10150 W. Jefferson Boulevard, Culver City 90232
www.q-t ec h.c om
Class B+ Products (Revision -, April 2009)
2
CLASS B+ PRODUCTS
Q-TECH
Package Specifications and Outline
QTX78
QTX88
0.550±.0.005
(13.970±0.13)
4
3
CORPORATION
CRYSTAL CLOCK OSCILLATORS
3.3 to 5.0Vdc - 450kHz to 85MHz
QTX92
0.350±.0.005
(8.89±0.13)
4
3
0.350±0.005
(8.89±0.13)
4
Q-TECH
P/N
FREQ.
D/C S/N
3
Q-TECH
P/N
FREQ.
D/C S/N
0.350±0.005
(8.89±0.13)
0.290±0.005
(7.37±0.13)
Q-TECH
P/N
FREQ.
D/C S/N
0.290±0.005
(7.37±0.13)
Pin No.
1
2
3
4
TRISTATE or NC
GND/CASE
OUTPUT
VDD
Function
1
2
0.100±.005
(2.54±0.13)
1
2
0.100±0.005
(2.54±0.13)
1
2
0.100±.005
(2.54±0.13)
0.200±.005
(5.080±0.13)
0.200±0.005
(5.08±0.13)
0.200±.005
(5.080±0.13)
0.170 MAX.
(4.318 MAX.)
0.018±.003
(0.46±0.08)
0.170 Max.
(4.32)
0.018±0.003
(0.457±0.076)
0.018±.003
(.457±0.076)
0.190 MAX.
(4.826 MAX.)
Package Information
0.375±0.005
(9.525±0.13)
.130 MAX.
3.302 MAX.
0.315±0.005
(8.00±0.13)
0.315±0.005
(8.00±0.13)
0.040 Max.
(1.02)
0.240±0.005
(6.10±0.13)
0.008
(.203)
0.110±.005
(2.794±0.13)
0.055±.005
(1.396±0.13)
• Package material: 90% AL2O3
• Lead material: Kovar
• Lead finish:
Gold Plated: 50µ ~ 80µ inches
Nickel Underplate: 100µ ~ 250µ inches
• Weight: 1.1g typ., 3g max.
0.300±.005
(7.620±0.13)
Ordering Information
Blank
1
2
3
=
=
=
=
Dimensions are in inches (mm)
Class B Die, Cultured Quartz Crystal
100 kRad (Si) High Dose 54ACT3301, Swept Quartz Crystal
100 kRad (Si) High Dose 54ACT3301, Cultured Quartz Crystal
Class B Die, Swept Quartz Crystal
78 = QT78
88 = QT88
92 = QT92
QT178XX - D - XX - X - 85.000MHz
Blank
M
B
S
Tristate Option D
(Left blank if no Tristate)
L = CMOS 3.3V
AC = ACMOS 5V
HC = HCMOS 5V
T = TTL 5V
Packaging Options
For Non-Standard requirements, contact Q-Tech Corporation at Sales@Q-Tech.com
• Solder Dip Sn/Pb 60/40%
• P. I. N. D. test
Frequency stability vs. temperature codes may not be available in all frequencies.
1
4
5
6
9
10
11
12
14
15
=
=
=
=
=
=
=
=
=
=
± 100ppm
± 50ppm
± 25ppm
± 50ppm
± 50ppm
± 100ppm
± 50ppm
± 100ppm
± 20ppm
± 25ppm
}
Output frequency
See screening level
tables on page 4
at
at
at
at
at
at
at
at
at
at
0ºC
0ºC
-20ºC
-55ºC
-55ºC
-55ºC
-40ºC
-40ºC
-20ºC
-40ºC
to
to
to
to
to
to
to
to
to
to
+70ºC
+70ºC
+70ºC
+105ºC
+125ºC
+125ºC
+85ºC
+85ºC
+70ºC
+85ºC
• Standard packaging in anti-static plastic tube (60pcs/tube)
• Tape and Reel is available for an additional charge.
Other Options Available For An Additional Charge
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-t ec h.com
Class B+ Products (Revision -, April 2009)
Specifications subject to change without prior notice.
3
CLASS B+ PRODUCTS
Screening Test Table
CORPORATION
Q-TECH
SCREENING
✓
✓
CRYSTAL CLOCK OSCILLATORS
3.3 to 5.0Vdc - 450kHz to 85MHz
STANDARD
883
883
883
883
883
883
883
883
METHOD
2023
2017
1008
1010
2001
2020
1015
1015
CONDITION
Class H
B (for M)
C (for B & S)
A
B
C
QUANTITY
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
COMMENTS
2.4 grams
10 cycles
Blank M B S
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓
✓
✓
✓
✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓
✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓
✓ ✓
Non destructive bond pull
Internal visual
Stabilization bake
Temperature cycling
TEST DESCRIPTION
48 hours at 150'C
Y1 direction only
Constant acceleration
Pre burn-in electrical
Burn-in #1
Burn-in #2
Interim electrical
Final electrical
Seal: Fine leak
Seal: Gross leak
Particle impact noise detection (PIND)
Refer to Table I and detail specification
5 passes minimum
(see note 1)
(see note 2)
(see note 2)
Refer toTable I, II and detail specification
125°C for 160 hours
Refer to detail specification ................... (for Blank)
Refer to Table I and detail specification ....... (for M)
Refer to Table I and detail specification ....... (for B)
Refer to Table I, II and detail specification ... (for S)
883
883
MIL-PRF-55310
MIL-PRF-55310
883
883
1014
1014
2012
-
A1
C
Class S
70 °C
125 °C for 160 hours
Radiographic inspection
Frequency aging 30days
External visual
1. PIND testing shall be performed using five (5) independent passes and all failures found at the end of each pass are rejected. The survivors of the
last pass are acceptable.
2. Burn-in shall be under the specified load and nominal voltage conditions.
3. Normally, frequency aging tests are for 30 days. However, the frequency aging test may be ceased if after 15 days the measured aging rate is less
than half of the specified aging rate.
✓
Frequency/Temperature stability
2009
±1.5ppm max.
(see note 3)
Measure the output frequency at ten equispaced points
minimum of the specified operating temperature range
Table I Electrical Test - Measurement Requirements (Applicable to screening level M, B, & S only)
Output frequency
Input current
Waveform
Parameters
Pre BI at 25ºC
M
✓
✓
✓
✓
✓
✓
✓
✓
✓
B
✓
✓
✓
✓
✓
✓
✓
✓
✓
S
✓
✓
✓
✓
✓
✓
✓
✓
✓
Pre BI Low T
M
B
✓
✓
S
✓
✓
Pre BI High T Interim BI at 25ºC Post BI at 25ºC
M
B
✓
✓
S
✓
✓
M
B
S
✓
✓
✓
✓
✓
✓
✓
✓
M
✓
✓
✓
✓
✓
✓
✓
✓
✓
B
✓
✓
✓
✓
✓
✓
✓
✓
✓
S
✓
✓
✓
✓
✓
✓
✓
✓
✓
Post BI Low T
M
B
✓
✓
✓
✓
✓
✓
✓
S
✓
✓
✓
✓
✓
✓
✓
Post BI High T
M
B
✓
✓
✓
✓
✓
✓
✓
S
✓
✓
✓
✓
✓
✓
✓
Frequency/temperature stability
Frequency/voltage stability
Output voltage
Duty cycle (symmetry)
Rise and fall times
Start up time
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Table II Delta Limits (Applicable to screening level S only)
Burn-In (second 160 hours Burn-In period)
Frequency aging after 30 days at +70°C
Test
Output Frequency
Supply current
Parameter
Symbol
Icc
Fo
±10% of initial reading
Refer to detail spec.
Delta Limits
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-t ec h.com
Class B+ Products (Revision -, April 2009)
4
CLASS B+ PRODUCTS
Q-TECH
Reflow Profile
CORPORATION
Embossed Tape and Reel Information
1.75±0.1
0.3±.005
ø1.5
2.0±0.1
CRYSTAL CLOCK OSCILLATORS
3.3 to 5.0Vdc - 450kHz to 85MHz
The five transition periods for the typical reflow process are:
• Preheat
• Flux activation
• Thermal equalization
• Reflow
• Cool down
FEEDING (PULL) DIRECTION
4.0±0.1
5.5±0.1
5º MAX
B
ø1.5
16±0.1
TYPICAL REFLOW PROFILE FOR Sn-Pb ASSEMBLY
C
ø13.0±0.5
A
TEMP(*C)
Ramp up (3ºC/s Max)
250
225
200
175
150
240º
2.5
Ramp down (6ºC/s Max)
225º min.
240º max.
60s min.
150s max.
60s min.
120s max.
125
100
75
50
25
0
0
20
40
60
2.0
120º
60s min.
120s max.
80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400 420
Time (s)
Dimensions are in mm. Tape is compliant to EIA-481-A.
Reel size vs. quantity:
Reel size
(Diameter in mm)
178
330
QTX78
QTX88 & QTX92
QT
10.01 ±0.1
7.747 ±0.1
A
14.53 ±0.1
9.271 ±0.1
B
26
4.80 ±0.1
4.699 ±0.1
Environmental Specifications
Qty per reel (pcs)
QTX78
QTX88, QTX92
250
1000
150
800
Q-Tech Standard Screening/QCI (MIL-PRF55310) is available for all of our QTX78 Products. Q-Tech can also customize screening
and test procedures to meet your specific requirements. The QTX78 product is designed and processed to exceed the following test
conditions:
Environmental Test
Temperature cycling
Constant acceleration
Seal Fine Leak
Burn-in
Aging
Vibration sinusoidal
Shock, non operating
Thermal shock, non operating
Ambient pressure, non operating
Resistance to solder heat
Moisture resistance
Terminal strength
Resistance to solvents
Solderability
ESD Classification
Moisture Sensitivity Level
Test Conditions
MIL-STD-883, Method 1010, Cond. B or Cond. C
MIL-STD-883, Method 2001, Cond. A, Y1
MIL-STD-883, Method 1014, Cond. A
160 hours, 125°C with load
30 days, 70°C, ±1.5ppm max
MIL-STD-202, Method 204, Cond. D
MIL-STD-202, Method 213, Cond. I (See Note 1)
MIL-STD-202, Method 107, Cond. B
MIL-STD-202, 105, Cond. C, 5 minutes dwell time minimum
MIL-STD-202, Method 210, Cond. B
MIL-STD-202, Method 106
MIL-STD-202, Method 211, Cond. C
MIL-STD-202, Method 215
MIL-STD-202, Method 208
MIL-STD-883, Method 3015, Class 1HBM 0 to 1,999V
J-STD-020, MSL=1
Note 1: Additional shock results successfully passed on 16MHz, 40MHz, and 80MHz
• Shock 850g peak, half-sine, 1 ms duration (MIL-STD-202, Method 213, Cond. D modified)
• Shock 1,500g peak, half-sine, 0.5ms duration (MIL-STD-883, Method 2002, Cond. B)
• Shock 36,000g peak, half-sine, 0.12 ms duration (QTX88 & QTX92)
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-t ec h.com
Class B+ Products (Revision -, April 2009)
Please contact Q-Tech for higher shock requirements
ø178±1
or
ø330±1
C
5
24.0±0.3
Test/Measurement
京公网安备 11010802033920号
EEWORLD
