If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
(Note 2)
Reverse Current
30mA
Forward Current
10mA
Operating Temperature Range (Note 3)
LM185-1.2
−55°C to +125°C
LM285-1.2
−40°C to +85°C
LM385-1.2
0°C to 70°C
ESD Susceptibility (Note 9)
2kV
Storage Temperature
−55°C to +150°C
Soldering Information
TO-92 package: 10 sec.
260°C
TO-46 package:10 sec.
300°C
SO and SOT Pkg.
Vapor phase (60 sec.)
215°C
Infrared (15 sec.)
220°C
See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” for other methods of soldering
surface mount devices.
Electrical Characteristics
(Note 4)
LM185-1.2
LM185BX-1.2
LM185BY-1.2
LM285-1.2
LM285BX-1.2
LM285BY-1.2
Tested
Design
Limit
Limit
(Notes 5, (Note 6)
8)
LM385B-1.2
LM385BX-1.2
LM385BY-1.2
LM385-1.2
Units
(Limit)
Tested
Limit
(Note 5)
1.205
1.260
Design
Limit
(Note 6)
V(Min)
V(Max)
20
15
1.5
25
μA
(Max)
mV
(Max)
mV
(Max)
Ω
μV
ppm
Parameter
Conditions
Typ
Tested
Limit
(Note 5)
1.223
1.247
Design
Limit
(Note 6)
Reverse Breakdown
Voltage
Minimum Operating
Current
Reverse Breakdown
Voltage Change
with Current
Reverse Dynamic
Impedance
Wideband Noise
(rms)
Long Term Stability
T
A
= 25°C,
10μA
≤
I
R
≤
20mA
1.23
5
8
1.223
1.247
10
1
10
20
1.5
20
15
1
20
20
1.5
25
15
10
1
20
LM385M3-1.2
10μA
≤
I
R
≤
1mA
1mA
≤
I
R
≤
20mA
I
R
= 100μA,
f = 20Hz
I
R
= 100μA,
10Hz
≤
f
≤
10kHz
I
R
= 100μA,
T = 1000 Hr,
T
A
= 25°C ±0.1°C
20
1
60
Average Temperature I
R
= 100μA
Coefficient (Note 7)
X Suffix
Y Suffix
All Others
30
50
150
30
50
150
150
ppm/°C
ppm/°C
ppm/°C
(Max)
Note 1:
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device
is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics.
The guaranteed specifications apply only for the test conditions listed.
Note 2:
Refer to RETS185H-1.2 for military specifications.
Note 3:
For elevated temperature operation, T
j
max is:
LM185 150°C
LM285 125°C
LM385 100°C
www.national.com
2
LM185-1.2/LM285-1.2/LM385-1.2
Thermal Resistance
θ
JA
(junction to ambient)
θ
JC
(junction to case)
TO-92
180°C/W (0.4″ leads)
170°C/W (0.125″ leads)
N/A
TO-46
440°C/W
80°C/W
SO-8
165°C/W
N/A
SOT23
283°C/W
N/A
Note 4:
Parameters identified with boldface type apply at temperature extremes. All other numbers apply at T
A
= T
J
= 25°C.
Note 5:
Guaranteed and 100% production tested.
Note 6:
Guaranteed, but not 100% production tested. These limits are not used to calculate average outgoing quality levels.
Note 7:
The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating
T
MAX
and T
MIN
, divided by T
MAX
− T
MIN
. The measured temperatures are −55°C, −40°C, 0°C, 25°C, 70°C, 85°C, 125°C.
Note 8:
A military RETS electrical specification is available on request.
Note 9:
The human body model is a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin.
When debugging the LCD driver of s3c410 under Linux, I encountered this problem. My screen is 320x240 4bp grayscale, so normally each line should be 320x4/8=160byte, that is, when I write the 160th by...
The board is at91sam9g45. I configured linux2.6.30 and compiled uImage to replace the uImage provided by the company. After all the programming is completed, I start the development board and can log ...
The main reason for writing this post is to record the process of doing this project, and to record the process of thinking and practice. I want to make a board that can accurately measure the posture...
At present, the traffic congestion in cities is quite serious. According to relevant news reports: In China, the traffic congestion has expanded from megacities such as Beijing, Shanghai, and Guang...[Details]
1 Introduction
PROFIBUS is an international, open, and manufacturer-independent fieldbus standard. It is widely used in manufacturing automation, process industry automation, and automatio...[Details]
Since the No. 4 blast furnace of Handan Iron and Steel was put into operation in 1993, its external equipment has been seriously aged, and the original PLC control system TDC3000 of the hot blast furn...[Details]
Continuity test
A variety of devices need to be checked for continuity, including cable assemblies, printed circuit boards, and connectors to ensure that these components have the expected contin...[Details]
System Overview
The system consists of a signal preprocessing circuit, a single-chip computer AT89C2051, a systematic LED display module, a serial port data storage circuit and system software...[Details]
0 Introduction
Under normal circumstances, the three-phase power in the power system is symmetrical, and they meet certain amplitude and phase conditions; but when the load changes, the syst...[Details]
One in five car failures are caused by batteries, a problem that will become more serious in the coming years as electric-by-wire, start/stop engine management and hybrid (electric/gas) vehicles be...[Details]
DCDC means DC to DC (conversion of different DC power values). Anything that meets this definition can be called a DCDC converter. Specifically, it means converting the input DC into AC through a s...[Details]
Based on the actual situation, a remote intelligent anti-theft alarm device for home use, connected to the telephone line, simple to operate, and stable and reliable in operation is designed. When ...[Details]
This paper describes the design method of electronic multifunctional watt-hour meter, the key technology of hardware design and the software design process. Taking NEC's μPD78F0338 microcontroller ...[Details]
Preface
DS18B2 is generally used in conjunction with a single-chip microcomputer, and there are few reports on
the interface between
DSP
and DS18B20. Therefore, this article introdu...[Details]
introduction
Frequency characteristic tester
Also known as sweep frequency meter or frequency response analyzer, it uses a rectangular oscilloscope with internal scale as
a displ...[Details]
The embedded network module series products of Yingchuang Company all have a streamlined ISA expansion bus, which usually includes several address buses, 8-bit data buses, read and write control li...[Details]
In the TV monitoring system, in order to complete the collection of information from various information points (video, audio, alarm signal) and the control of various front-end devices (PTZ, lens,...[Details]
Designing with FPGA, DSP or microprocessor is a critical part of the design and also takes the most time. System-level designers can benefit greatly by focusing their main efforts on system desig...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
