P5-125222 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Mechanical and electronic products> switch> P5-125222

P5-125222: DescriptionPushbutton Switch, SPST, On-off, Alternate, 10A, 28VDC, Screw Terminal, Panel Mount; CategoryMechanical and electronic products switch; File Size696KB，2 Pages; ManufacturerOTTO; Websitehttp://www.ottoexcellence.com

Download Datasheet Parametric View All

P5-125222 Overview

Pushbutton Switch, SPST, On-off, Alternate, 10A, 28VDC, Screw Terminal, Panel Mount

P5-125222 Parametric

Parameter Name	Attribute value
Maker	OTTO
Reach Compliance Code	unknown
ECCN code	EAR99
Actuator angle
Actuator length	0.25 inch
Actuator material	NYLON
Actuator stroke	4.572 mm
Actuator type	PUSHBUTTON
Other features	BLACK, DUST-TIT BLK BEZ, MIL.
body height	20.66 mm
Body length or diameter	15.82 mm
Nozzle length
Center contact plating	SILVER
Contact (AC) maximum rated load I	5A@115VAC
Contact (AC) maximum rated load M	3A@115VAC
Contact (AC) maximum rated R load	10A@115VAC
Maximum contact current (AC)	10 A
Maximum contact current (DC)	10 A
Contact (DC) maximum rated R load	10A@28VDC
Contact function	ON-OFF
contact time	SNAP ACTION
Maximum contact voltage (AC)	115 V
Maximum contact voltage (DC)	28 V
Dielectric withstand voltage	1050VRMS V
Electrical life	25000 Cycle(s)
End contact plating	SILVER
Shell material	ALUMINUM ALLOY
JESD-609 code	e4
Manufacturer's serial number	P5
Installation features	PANEL MOUNT
Maximum operating force	17.79 N
seal	EPOXY TERMINAL SEALED; IP64
surface mount	NO
Switch action	ALTERNATE
switch function	SPST
Switch type	PUSHBUTTON SWITCH
Terminal surface	GOLD/SILVER
Terminal length	0.156 inch
Termination type	SCREW

Preview

Download Datasheet

View All

ALTERNATE

ACTION

ALTERNATE ACTION PUSHBUTTONS

SEALED AGAINST DUST & MOISTURE

The P5 Alternate Action switches match the P1, P3 and P8

Momentary Action Pushbutton models for mixed function

with common panel appearance. Now you can design panels

with both alternate and momentary action switches and have

uniform panel appearance. The P5 features alternate action

in the same pushbutton and housing configuration as the

momentary P1 and P3 and as a bonus, the P5 requires less

behind the panel space than the P1 and P3 momentary versions.

Push and the P5 switch turns “on.” Push again and the P5 switch

turns “off.” Positive tactile feedback is featured so the operator

is clearly aware the switch mode has been executed. The button

returns to the original position after each actuation.

To guard against front panel splash and dirt, the P5 series

is sealed at the button with OTTO’s patented “rolling

sleeve”principle. The terminals are sealed with epoxy, providing

a seal against flux during wiring and behind panel dirt and

moisture. The combination of sealing provides smooth operation

over a wide temperature range. Watertight sealing to IP68S is

available.

A vandal resistant style is available in the P5-V series. Custom

housings, shrouded buttons, contact configurations and

materials are available to suit your application requirements. We

also provide custom button engraving with epoxy ink backfill,

watertight versions and other special characteristics.

, Push O

“Push On

ff” action

Style P5-4

Style P5-3

Style P5-6

Style P5-1

Standard Characteristics/Ratings:

ELECTRICAL RATINGS:

Load

Resistive

Inductive

Lamp

Motor

DWV

Low Level

Electrical Life:

Mechanical Life:

Seal:

Operating Force:

Total Travel:

Overtravel:

Sea Level @ 28VDC

or 115VAC, 60/400Hz

10A

1050Vrms

10mA @ 30mV

25,000 cycles

1,000,000 cycles

IP64 & MIL-PRF-8805 Design 2 or IP68S

3.0 lbs. +1/-0.5 lb.

0.180 inches max

0.012 inches min

Features:

• Button sealed with patented “rolling sleeve” principle

• Contact area sealed at case & terminals

• Moistureproof & dusttight to IP64 & MIL-PRF-8805

Design 2 or watertight to IP68S

• Less than 25mΩ contact resistance

• Handles low level up to 10 amps

• Variety of mounting styles

• Engraved buttons available

• Choice of 9 button & 3 bezel colors

• Panel appearance matches most other OTTO

momentary pushbutton switches

• Unsealed construction also available

• RoHS/WEEE/Reach compliant

Operating Temp Range:

-55°C to +85°C

MATERIALS:

Case:

Button:

Terminals:

Terminal Hardware:

Mounting Hardware:

Anodized aluminum alloy

Thermoplastic

Brass, silver plate or gold plate for low level

Terminal lugs, lockwasher and screw for screw terminal option

Hex nut, lockwasher and panel seal on watertight switches

119

OTTO Full Line Catalog

Specifications Subject To Change Without Notice

Recommended Resources

Four-channel infrared remote control receiver circuit

RTS721/RTS731 circuit-b

8-bit AD circuit block diagram of ML2252

Sensor and AD822 type single power supply, power supply positive and negative limited output, low power consumption FET input operational amplifier circuit

DC motor speed control circuit

Electronic walkie-talkie circuit diagram

A time-delayed shutdown circuit: A time-delayed shutdown circuit...; Jacktang Analogue and Mixed Signal

Automotive 10V-80V Ultra-Wide Vin, 12V Vout Flyback Reference Design for 48V Car Battery: The reference design is a 24W, automotive 48V battery front-end power supply that generates 12V from a wide input range of 10V to 80V DC with transients up to 100V per LV148. The system includes CISPR...; qwqwqw2088 Analogue and Mixed Signal

Basic question: Is there a limit on the length of registers in FPGA?: FPGA is a hardware programming device. The length of the register is theoretically unlimited, but it is limited by the hardware capacity and the clock rate requirement for the register. For example, t...; eeleader FPGA/CPLD

Please solve it~~: Use the STM32 development board to make a wireless optical communication system. The complete function of STM32 is to use the serial port interrupt method to receive the data sent by the PC and then p...; matianli111 Embedded System

Is it true that STM32 can run at 72M?: Some people say that ST's FLASH is at fastest at 24M, and the CPU has to wait for 2 cycles at 72M, which means it cannot reach 72M. It would be meaningless if it could run in SRAM....; wanghongzhi1986 stm32/stm8

Toshiba Photorelay TLP3547 Review - Switch Response Parameters: [i=s]This post was last edited by morniglory on 2018-9-15 13:31[/i] The switch time response parameters of TLP3547 were mainly tested: The circuit is as follows:According to the manual, RL=200 ohms ar...; morniglory Toshiba Photorelays TLP3547 Review

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components