When I used ADS1.2 before, I used string functions such as strstsr(), strcpy(), strcat(), strlen(), and memcpy(). When compiling, a warning would appear, which meant that these functions could not be ...
[i=s]This post was last edited by azhiking on 2014-1-14 23:07[/i] [postbg]bg4.png[/postbg][align=left][font=微软雅黑][size=1]As an electronic engineer, you need to balance your job and keep up with the ne...
1. What is the reason for the upper (lower) part of the output signal of the common-source (base, collector) circuit to be flattened? [/font] 2. As shown in Figure 1, the input resistance of the op am...
3. OLED displays temperature and humidityIn the previous post, the temperature and humidity sensor DHT11 was tested, and the temperature and temperature data were printed out through the serial port o...
China's new energy vehicles are in a transition period from research and development to real industrial development. In 2012, with the intensive launch of new energy vehicle policy planning, the de...[Details]
1 Introduction
With the acceleration of the pace of urban modernization, society has higher requirements for urban road lighting and urban lighting projects. The state has clearly required tha...[Details]
This week, Microsoft held its 2012 Microsoft Worldwide Partner Conference (WPC) in Toronto, Canada. At the conference, Microsoft showed its new products and services to partners around the world. A...[Details]
LED lighting: Basic circuit design can be completed in as little as one day
Semiconductor manufacturers are also getting involved in the LED lighting business. The power circuit of LED req...[Details]
0 Introduction
High-precision current source can provide high-precision current supply for precision instruments, and is suitable for automatic measurement tasks of various resistors in semico...[Details]
The ARINC429 bus is one of the most commonly used communication buses between various subsystems of avionics. As the "skeleton" of modern avionics systems, once the bus system or the attached airbo...[Details]
1. Tips for charging UPS for the first time
After purchasing a new UPS, plug the UPS into the 220V mains power grid and charge it for at least 12 hours to ensure that the battery is fully char...[Details]
Direct digital frequency synthesis (DDS) has fast frequency switching and modulation capabilities and is widely used. However, when low power consumption and low cost are the main considerations, D...[Details]
1 Introduction
At present, advocating health has become the focus of people's attention, and the emergence of treadmills has become more and more popular. People can exercise at home or in the ...[Details]
Infrared remote control is widely used in home appliances, but the remote controls produced are not compatible with each other. The universal remote controls commonly seen on the market can only co...[Details]
In some motion control systems with simple control or low cost requirements, stepper motors are often used as actuators. The biggest advantage of stepper motors in such applications is that they ca...[Details]
Li/SOCl2 batteries (lithium sub-cells) have the advantages of high operating voltage, stable discharge voltage, wide operating temperature range and long storage life, and have been widely used in ...[Details]
1 Introduction
The coke oven gas recovery system is mainly composed of a gas tank and a pressure reducing station. While realizing the recycling and reuse of coke oven gas, it also plays an imp...[Details]
1 Introduction
The function of the material transport vehicle is to lift the mixed finished materials into the finished material storage bin. In the early mixing equipment, the material transpo...[Details]
●Try to use original batteries
Using original batteries is the most important thing to ensure your safety. Nokia once claimed that there have been more than 20 mobile phone battery explosi...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
