The clocks in digital systems are typically square waves
with a 50% duty cycle and as frequencies increase the
edge rates also get faster. Analysis shows that a square
wave is composed of fundamental frequency and
harmonics. The fundamental frequency and harmonics
generate the energy peaks that become the source of
EMI. Regulatory agencies test electronic equipment by
measuring the amount of peak energy radiated from the
equipment. In fact, the peak level allowed decreases as
the frequency increases. The standard methods of
reducing EMI are to use shielding, filtering, multi-layer
PCBs, etc. These methods are expensive. Spread
spectrum clocking reduces the peak energy by reducing
the Q factor of the clock. This is done by slowly
modulating the clock frequency. The PCS3P624Z05/09
uses the center modulation spread spectrum technique in
which the modulated output frequency varies above and
below the reference frequency with a specified
modulation rate. With center modulation, the average
frequency is the same as the unmodulated frequency and
there is no performance degradation.
Zero Delay and Skew Control
All outputs should be uniformly loaded to achieve Zero
Delay between input and output. Since the DLY_CTRL
pin is the internal feedback to the PLL, its relative loading
can adjust the input-output delay.
For applications requiring zero input-output delay, all
outputs, including DLY_CTRL, must be equally loaded.
Even if DLY_CTRL is not used, it must have a capacitive
load equal to that on other outputs, for obtaining zero
input-output delay.
Timing-Safe™ technology
Timing-Safe™ technology is the ability to modulate a
clock source with Spread Spectrum technology and
maintain synchronization with any associated data path.
Rev. #1 | Page 2 of 15 | www.onsemi.com
PCS3P624Z05B/C and PCS3P624Z09B/C
Pin Configuration for PCS3P624Z05B/C
CLKIN
1
CLKOUT1
2
CLKOUT2
3
GND
4
PCS3P624Z05B/C
8
DLY_CTRL
CLKOUT4
VDD
CLKOUT3
7
6
5
Pin Description for PCS3P624Z05B/C
Pin #
1
2
3
4
5
6
7
8
Pin Name
CLKIN
1
2
2
Type
I
O
O
P
O
P
O
O
Buffered clock output
Buffered clock output
Ground
Buffered clock output
3.3V supply
Buffered clock output
4
4
4
4
Description
External reference Clock input, 5V tolerant input
CLKOUT1
CLKOUT2
GND
CLKOUT3
VDD
CLKOUT4
2
2
DLY_CTRL
External Input-Output Delay control. This pin can be used as clock output
4
Notes: 1. Weak pull down
2. Weak pull-down on all outputs
3. Weak pull-up on these Inputs
4. Buffered clock output is Timing-Safe™
Rev. #1 | Page 3 of 15 | www.onsemi.com
PCS3P624Z05B/C and PCS3P624Z09B/C
Pin Configuration for PCS3P624Z09B/C
CLKIN
1
CLKOUTA1
2
CLKOUTA2
3
VDD
4
GND
5
16
15
14
13
DLY_CTRL
CLKOUTA4
CLKOUTA3
VDD
GND
CLKOUTB4
CLKOUTB3
S1
PCS3P624Z09B/C
12
11
10
9
CLKOUTB1
6
CLKOUTB2
7
S2
8
Pin Description for PCS3P624Z09B/C
Pin #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Pin Name
CLKIN
1
2
2
Pin Type
I
O
O
P
P
Buffered clock Bank A output
Buffered clock Bank A output
3.3V supply
Ground
Buffered clock Bank B output
Buffered clock Bank B output
4
4
4
4
Description
External reference Clock input, 5V tolerant input
CLKOUTA1
CLKOUTA2
VDD
GND
CLKOUTB1
CLKOUTB2
S2
S1
3
3
2
2
O
O
I
I
Select input, bit 2.See
Select Input Decoding table for PCS3P624Z09
for more details
Select input, bit 1.See
Select Input Decoding table for PCS3P624Z09
for more details
Buffered clock Bank B output
Buffered clock Bank B output
Ground
3.3V supply
Buffered clock Bank A output
Buffered clock Bank A output
4
4
4
4
CLKOUTB3
CLKOUTB4
GND
VDD
CLKOUTA3
CLKOUTA4
DLY_CTRL
2
2
O
O
P
P
2
2
O
O
O
2
External Input-Output Delay control. This pin can be used as clock output
Notes: 1. Weak pull down
2. Weak pull-down on all outputs
3. Weak pull-up on these Inputs
4. Buffered clock output is Timing-Safe™
Rev. #1 | Page 4 of 15 | www.onsemi.com
PCS3P624Z05B/C and PCS3P624Z09B/C
Select Input Decoding table for PCS3P624Z09
S2
0
0
1
1
S1
0
1
0
1
CLKOUT A1 - A4 CLKOUT B1 - B4 DLY_CTRL
Three-state
Driven
Driven
Driven
Three-state
Three-state
Driven
Driven
Driven
Driven
Driven
Driven
1
Output Source
PLL
PLL
Reference
PLL
PLL
Shut-Down
N
N
Y
N
Notes: This output is driven and has an internal feedback for the PLL. The load on this output can be adjusted to change the skew between the reference and
the Output.
Spread Spectrum Control and Input-Output Skew Table
Frequency (MHz)
75
Device
PCS3P624Z05B / 09B
PCS3P624Z05C / 09C
Deviation (
±%)
0.25
0.5
Input-Output Skew (±T
SKEW
)
0.0625
0.125
Note: T
SKEW
is measured in units of the Clock Period
Absolute Maximum Ratings
Symbol
VDD
VIN
T
STG
T
s
T
J
T
DV
DC Input Voltage (CLKIN)
Storage temperature
Parameter
Rating
-0.5 to +4.6
-0.5 to +7
-65 to +125
260
150
2
Unit
V
°C
°C
°C
KV
Supply Voltage to Ground Potential
Max. Soldering Temperature (10 sec)
Junction Temperature
Static Discharge Voltage (As per JEDEC STD22- A114-B)
Note: These are stress ratings only and are not implied for functional use. Exposure to absolute maximum ratings for prolonged periods of time may affect
Is there any module similar to E-WeChat?
Would it be best if it can communicate in two directions? Actually, it doesn't have one. Just like E-WeChat, one-way communication is also OK.
It's so frustrat...
Why does a checksum error appear when decompressing NK.bin? The operations are as follows: Enter a new temporary download address(0x3...):0x32000000 The temporary download address is 0x32000000. USB h...
Keyword: [b]Camera[/b] Recently, my friend bought a [url=http://www.yucoo.com/jiankongshexiangji.html][color=black]camera[/color][/url] to use for video chat. After installing the camera according to ...
As cellular phones become more advanced, the power consumption of the system during operation and the power consumption during standby are also increasing. Therefore, the power management design of...[Details]
introduction
The emergence of high-performance, low-power embedded CPUs and high-reliability network operating systems has made it possible to implement applications with large amounts of comp...[Details]
1 Introduction
Water resources are the basic conditions for human survival and the lifeline of economic development. The reality shows that due to the global shortage of water resources and th...[Details]
General LED lighting has a current limiting resistor in the driving circuit, and the power consumed by the resistor has nothing to do with the LED light emission. In order to improve efficiency, a...[Details]
In recent years, with the rapid development of the information industry, dot matrix LED display screens have been widely used in various advertising and information display systems such as the fina...[Details]
With the advocacy and implementation of the government's Safe City Plan, the security market has increasingly higher requirements for the clarity of surveillance images. Imagine that after a case o...[Details]
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, this proportion may be as high as 30-40% as more safety electronics, fuel consumption and ...[Details]
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
Introduction
As the country increases its efforts to control the atmospheric environment, motorcycle emission regulations will become stricter year by year, and motorcycles that do not meet the...[Details]
1 Introduction
Ultrasound refers to elastic vibration with a frequency higher than the audible frequency limit (i.e., in the frequency band above 20 kHz). The propagation process of this vib...[Details]
Analysis of the three core aspects of digital TV transmission standards
According to the differences in regionality, transmission method and modulation method, the transmission method needs to...[Details]
Fruit planting is an important part of China's agricultural development, and fruit tree pest control operations are becoming more and more important. At present, the overall level of pesticide applica...[Details]
With the continuous advancement of various technologies in the field of measurement and control, the baseband subsystem of general measurement and control equipment has entered the fourth generation o...[Details]
Abstract: Based on the ZigBee parking lot SMS car search system, the location of the vehicle in the parking lot is sent to the owner through SMS, which is convenient for the owner to quickly find ...[Details]
1 Introduction to LED
With the development of science and technology, people have higher and higher requirements on automobile light sources. LED (Light Emitting Diode) has gradually attracted...[Details]