MC68L11KA3FN1 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> MC68L11KA3FN1

MC68L11KA3FN1: DescriptionMicrocontroller, 8-Bit, MROM, 6800 CPU, 1MHz, CMOS, PQCC68, PLASTIC, LCC-68; CategoryThe embedded processor and controller Microcontrollers and processors; File Size336KB，68 Pages; ManufacturerMotorola ( NXP ); Websitehttps://www.nxp.com

Download Datasheet Parametric View All

MC68L11KA3FN1 Overview

Microcontroller, 8-Bit, MROM, 6800 CPU, 1MHz, CMOS, PQCC68, PLASTIC, LCC-68

MC68L11KA3FN1 Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Maker	Motorola ( NXP )
package instruction	QCCJ, LDCC68,1.0SQ
Reach Compliance Code	unknown
Has ADC	YES
Address bus width	16
bit size	8
CPU series	6800
maximum clock frequency	1 MHz
DAC channel	NO
DMA channel	NO
External data bus width	8
JESD-30 code	S-PQCC-J68
JESD-609 code	e0
length	24.2062 mm
Number of I/O lines	51
Number of terminals	68
Maximum operating temperature	70 °C
Minimum operating temperature	-20 °C
PWM channel	YES
Package body material	PLASTIC/EPOXY
encapsulated code	QCCJ
Encapsulate equivalent code	LDCC68,1.0SQ
Package shape	SQUARE
Package form	CHIP CARRIER
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
power supply	3.3/5 V
Certification status	Not Qualified
RAM (bytes)	768
rom(word)	24576
ROM programmability	MROM
Maximum seat height	4.57 mm
speed	1 MHz
Maximum supply voltage	5.5 V
Minimum supply voltage	3 V
Nominal supply voltage	5 V
surface mount	YES
technology	CMOS
Temperature level	COMMERCIAL
Terminal surface	Tin/Lead (Sn/Pb)
Terminal form	J BEND
Terminal pitch	1.27 mm
Terminal location	QUAD
Maximum time at peak reflow temperature	NOT SPECIFIED
width	24.2062 mm
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER

Preview

Download Datasheet

View All

MOTOROLA

SEMICONDUCTOR

TECHNICAL DATA

Order this document

by MC68HC11KA4TS/D

M68HC11 KA Series

Technical Summary

8-Bit Microcontroller

1 Introduction

The MC68HC11KA4 family of microcontrollers are enhanced derivatives of the MC68HC11F1 and, as

shown in the block diagram, include many additional features. The family includes the MC68HC11KA0,

MC68HC11KA1, MC68HC11KA3, MC68HC11KA4, MC68HC711KA4, MC68HC11KA2, and the

MC68HC711KA2. These MCUs, with a non-multiplexed expanded bus, are characterized by high

speed and low power consumption. The fully static design allows operation at frequencies from 4 MHz

to dc.

This technical summary contains information concerning standard, custom-ROM, and extended-volt-

age devices. Standard devices are those with disabled ROM (MC68HC11KA1), disabled EEPROM

(MC68HC11KA0), and EPROM replacing ROM (MC68HC711KA4). The MC68HC11KA2 and

MC68HC711KA2 contain 32 Kbytes of ROM/EPROM instead of 24 Kbytes. Custom-ROM devices have

a ROM array that is programmed at the factory to customer specifications. Extended-voltage devices

are guaranteed to operate over a much greater voltage range (3.0 Vdc to 5.5 Vdc) at lower frequencies

than the standard devices. Refer to the ordering information on the following pages.

In this summary, ROM/EPROM refers to ROM for ROM-based devices and refers to EPROM for

EPROM-based devices.

1.1 Features

• M68HC11 Central Processing Unit (CPU)

• Power Saving STOP and WAIT Modes

• 768 Bytes RAM in MC68HC11KA4, 1024 Bytes RAM in MC68HC11KA2 (Saved During Standby)

• 640 Bytes Electrically Erasable Programmable ROM (EEPROM)

• 24 Kbytes ROM/EPROM, 32 Kbytes ROM/EPROM in MC68HC11KA2

• PROG Mode Allows Use of Standard EPROM Programmer (27256 Footprint)

• Non-multiplexed Address and Data Buses

• Enhanced 16-Bit Timer with Four-Stage Programmable Prescaler

— Three Input Capture (IC) Channels

— Four Output Compare (OC) Channels

— One Additional Channel, Selectable as Fourth IC or Fifth OC

• 8-Bit Pulse Accumulator

• Four 8-Bit or Two 16-Bit Pulse-Width Modulation (PWM) Timer Channels

• Real-Time Interrupt Circuit

• Computer Operating Properly (COP) Watchdog

• Enhanced Asynchronous Nonreturn to Zero (NRZ) Serial Communications Interface (SCI)

• Enhanced Synchronous Serial Peripheral Interface (SPI)

• Eight-Channel 8-Bit Analog-to-Digital (A/D) Converter (Four Channels on 64-Pin Version)

• Seven Bidirectional Input/Output (I/O) Ports (43 Pins)

• One Fixed Input-Only Port (8 Pins, 4 Pins on 64-Pin Version)

• Available in 68-Pin Plastic Leaded Chip Carrier (Custom ROM/OTPROM), 68-Pin Windowed Ce-

ramic Leaded Chip Carrier (EPROM), or 64-Pin Quad Flat Pack (Custom ROM/OTPROM)

This document contains information on a new product. Speciﬁcations and information herein are subject to change without notice.

Recommended Resources

Voltage stabilization circuit diagram with synchronous adjustment of positive and negative voltages

Sound signal bandwidth display circuit

Small power uninterruptible power supply circuit diagram

555 economical fluorescent display filament voltage source circuit

Standby motor automatic input control circuit

EEWORLD Chip Coin Bidding——Three Books: [font=微软雅黑][size=3] [/size][/font] [font=微软雅黑][size=3]The three books participating in the core currency bidding this time are: [/size][/font] [font=微软雅黑][size=3]A "[b]Advanced FPGA Design Structure I...; eric_wang Talking

①After F2812 XINT1 interrupt, the program always runs away? ?: There are two questions:1. Why do we need to enable group1 interrupt (① in the code below) and general interrupt enable (② in the code below) again in the interrupt function of xint1 even if the inter...; lylnk Microcontroller MCU

500 V Common Mode Voltage Current Monitor: The article "ADI Award-winning Download - Solar Photovoltaic Power Generation Solutions" mentions several very distinctive circuits of ADI, the 500 V common-mode voltage and current monitor AD8212, an...; dontium ADI Reference Circuit

A disassembled emergency light found on the Internet: These few days, I will find some relevant reference materials for our activities and prepare to participate in them.I found a picture of my buddy violently disassembling the emergency light. I'm repos...; clark DIY/Open Source Hardware

STC single chip computer frequency measurement problem: I use STC microcontroller to measure frequency (0-26HZ). The frequency signal is introduced by external interrupt 1-INT1, using falling edge trigger mode, and TIMER1 measures the time between two fall...; lvyu55 Embedded System

CCS compiles and generates binary files: The default file generated by CCS is in coff format. The default .out file is in this file format. If you want to generate binary files, set CCS as follows. 1. Project-right click-show build settings....; fish001 DSP and ARM Processors

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components