PROFESSIONAL, INDUSTRIAL AND MILITARY QUALITY
THREE PERFORMANCE LEVELS FOR BEST COST/PERFORMANCE RATIO
Positronic Industries
connectpositronic.com
STANDARD DENSITY PCB MOUNT
C
ombo-
D
D
-
S
ub
Size 20 Fixed Signal and
Thermocouple Contacts
Size 8 Removable Power, Shielded,
Air and High Voltage Contacts
CBD/CBM SERIES
3
U.L. Recognized
File #E49351
CSA Recognized
File #LR54219
D.E.S.C. 85039
Telecommunication U.L. File #E140980
Combo-D series connectors permit mixed contact com-
binations of power, shielded, air, high voltage and signal
contacts within the same connector body. Twenty-two
connector variants are offered in six standard shell sizes.
Three performance levels of Combo-D series connec-
tors are offered: professional, industrial and military. CBD
series connectors are quality connectors recommended
for use in sheltered, non-corrosive indoor and outdoor
environments having normal ventilation, but without tem-
perature or humidity controls. Signal contacts are offered
with open entry professional level or PosiBand closed
entry industrial level signal contacts. CBD series connec-
tors meet performance requirements of I.E.C. 807-2,
Performance Level One or Two. CBM series connectors
are military quality connectors recommended for use in
sheltered, mildly corrosive environments having a wide
range of temperature, pressure and humidity changes.
CBM series connectors will meet the applicable perform-
ance requirements of D.E.S.C. 85039.
Combo-D series connectors utilize precision machined
signal contacts. Connector variants are available with
contact terminations for solder and straight and right
angle (90°) printed board mount terminations featuring a
choice of inch or metric printed board footprints.
Power, shielded and high voltage contacts are remov-
able, having solder and straight and right angle (90°)
printed board mount terminations. Power and shielded
contacts are available with crimp terminations. Air contact
options are also available, see page 80 for details.
For low level shielding requirements, ferrite inductors
may be attached to both signal and power contacts of
connectors having contact terminations which are
straight or right angle (90°) for printed board mounting
applications. For additional information contact Technical
Sales.
The female power contacts feature the Large Surface
Area (L.S.A.) closed entry contact design which pro-
vides maximum mating surfaces between male and
female contacts and reduced contact resistance during
operation.
A wide assortment of printed board mounting hard-
ware, cable support hoods, and locking systems is avail-
able from stock.
A blind mating system is available for applications
requiring connector coupling in recessed areas or mobile
power coupling systems.
Straight and right angle (90°) PCB mount thermocou-
ple contacts are available, please contact Technical Sales
for details.
Di
rec
tive
2002
/9
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
5/
EC
RoHS
IT
R
O
NIC
INDU
S
TR
POS
IES
For RoHS options
see page 21.
•
pe
•
U
rE
C
ombo-
D
D
-
S
ub
PROFESSIONAL, INDUSTRIAL AND MILITARY QUALITY
THREE PERFORMANCE LEVELS FOR BEST COST/PERFORMANCE RATIO
STANDARD DENSITY PCB MOUNT
Positronic Industries
connectpositronic.com
TECHNICAL CHARACTERISTICS
MATERIALS AND FINISHES:
Insulator:
Contacts:
Contact Plating:
Signal:
Glass filled polyester per MIL-M-24519
UL 94V-0, blue color, and composite.
Precision machined copper alloy.
Gold flash over nickel plate and gold 0.000050
[1.27µ] over nickel plate. Other finishes
available upon request, see page 89.
Gold flash over nickel. Other finishes avail-
able upon request, see page 89.
For contact platings, see pages 68.
For contact platings, see pages 68.
Steel or brass with tin plate; zinc plate with
chromate seal; stainless steel passivated.
Other materials and finishes available upon
request.
Nylon; copper alloy or steel with zinc
plate and chromate seal or tin plate; phos-
phor bronze with tin plate; stainless steel,
passivated.
Phosphor bronze and beryllium copper with
tin plate.
Brass or steel with zinc plate and chromate
seal or clear zinc plate or tin plate; stainless
steel, passivated.
Composite and plastic, UL 94V-0; brass or
steel with zinc plate and chromate seal; alu-
minum or aluminum with electroless nickel
plate; die cast zinc.
High Voltage Contacts:
Shells:
Polarization:
Mounting to
Angle Brackets:
Straight and right angle (90°) terminations –
0.041 inch [1.04mm] minimum hole diameter.
Male shells may be dimpled for EMI/ESD
ground paths.
Trapezoidally shaped shells and polarized
jackscrews.
Jackscrews and riveted fasteners with
0.120 inch [3.05mm] diameter hole, and
threaded riveted fasteners with 4-40 threads
and nylon inserts.
Rapid installation push-on fasteners and
threaded posts.
Jackscrews and vibration locking systems.
CBD series, open entry contacts, 500
operations. CBD series, PosiBand closed
entry and CBM series, 1,000 operations. Per
IEC 512-5.
Power:
Shielded:
High Voltage:
Shells:
Mounting to
Printed Board:
Locking Systems:
Mechanical Operations:
Mounting Spacers
and Brackets:
ELECTRICAL CHARACTERISTICS:
SIZE 20 CONTACTS
Contact Current Rating:
Initial Contact Resistance:
Proof Voltage:
SIZE 8 CONTACTS
POWER CONTACTS
Contact Current Rating - Tested per U.L. 1977:
Standard Contact Material:
0.078 inches diameter / 12 AWG terminations:
39 amperes.
0.094 inches diameter / 10 AWG terminations:
50 amperes.
0.125 inches diameter / 8 AWG terminations:
70 amperes.
See Temperature Rise Curves on page 1 for details.
High Conductivity Contact Material:
8 AWG terminations:
80 amperes.
See Temperature Rise Curves on page 2 for details.
Initial Contact Resistance:
Standard Contact Material:
0.0005 ohms max. per IEC 512-2,
Test 2b.
High Conductivity
0.00035 ohms max. per IEC 512-2,
Contact Material:
Test 2b.
Proof Voltage:
1000 V r.m.s.
SHIELDED CONTACTS
For electrical characteristics, see pages 69.
HIGH VOLTAGE CONTACTS
For electrical characteristics, see pages 69.
CONNECTOR
Insulator Resistance:
Clearance and
Creepage Distance:
Working Voltage:
5 G ohms.
7.5 amperes nominal.
0.008 ohms maximum.
1000 V r.m.s.
Push-On Fasteners:
Jackscrew Systems:
Hoods:
Non-magnetic versions are available, contact Technical Sales.
MECHANICAL CHARACTERISTICS:
Signal Contacts,
Fixed:
Size 20 contacts, male - 0.040 inch
[1.02mm] diameter. CBD series has open
entry female contacts. PosiBand closed
entry female options are also available.
CBM series has PosiBand closed entry
female contacts, see page 69 for details.
Signal: 9 lbs. [40N]. Power, shielded
and high voltage: 22 lbs [98N].
500˚F [260˚C] for 10 seconds duration
per IEC 512-6.
Solder contacts - 0.042 inch [1.06mm]
minimum hole diameter for 20 AWG [0.5
mm
2
] wire maximum.
Straight Printed Board Mount – 0.028 inch
[0.71mm] termination diameter.
Right Angle (90°) Printed Board Mount –
0.028 inch [0.71 mm] termination diameter.
Size 8 contact, male – 0.142 inch [3.61mm]
mating diameter. Terminations for 6, 8, 10,
12, and 16 AWG. Female contact features
Large Surface Area (L.S.A.) closed entry
contact design utilizing BeCu mechanical
retention member. Closed crimp barrel.
Size 8 contact, male – 0.142 inch
[3.61mm] mating diameter. Printed board
terminations with 0.078 inch [1.98mm],
0.094 inch [2.39mm] and 0.125 inch
[3.18mm] termination diameters.
See table of cable sizes for contact
termination dimensions, page 78.
Contact Retention
in Insulator:
Resistance to
Solder Iron Heat:
Signal Contact
Terminations:
0.039 [1.0mm] minimum.
300 V r.m.s.
Power Contacts,
Removable, Crimp
or Solder Termination:
CLIMATIC CHARACTERISTICS:
Temperature Range:
Damp Heat, Steady State:
-55°C to +125°C.
10 days.
THERMOCOUPLE CONTACTS:
Straight and right angle PCB mount contacts are available, please contact
Technical Sales for details.
Size 20 crimp contacts are available in CBC series, see page 74 for
details.
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Power Contacts,
Printed Board Mount:
Shielded Contacts,
Removable:
4
C-004 Rev. E2
CBD/CBM SERIES
PROFESSIONAL, INDUSTRIAL AND MILITARY QUALITY
THREE PERFORMANCE LEVELS FOR BEST COST/PERFORMANCE RATIO
Positronic Industries
connectpositronic.com
STANDARD DENSITY PCB MOUNT
C
ombo-
D
D
-
S
ub
CONTACT VARIANTS
FACE VIEW OF MALE OR REAR VIEW OF FEMALE
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
SHELL SIZE 1
CBD/CBM SERIES
5W5
8W8
21WA4
24W7
*
1
2WK2
5W1
SHELL SIZE 2
3W3
*
2
3WK3
7W2
11W1
SHELL SIZE 3
9W4
13W3
17W2
21W1
SHELL SIZE 4
13W6
17W5
25W3
27W2
SHELL SIZE 5
36W4
43W2
47W1
SHELL SIZE 6
46W4
Notes:
*
1
2WK2 connectors have 1 male and 1 female contacts. Female con-
nector should be loaded with female contact in A2 position.
*
2
3WK3 male variant contains 2 male contacts and 1 female contact.
Female variant contains 2 female contacts and 1 male contact
5
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
C
ombo-
D
D
-
S
ub
PROFESSIONAL, INDUSTRIAL AND MILITARY QUALITY
THREE PERFORMANCE LEVELS FOR BEST COST/PERFORMANCE RATIO
STANDARD DENSITY PCB MOUNT
Positronic Industries
connectpositronic.com
STANDARD SHELL ASSEMBLY
NEW!
RECOMMENDED MATING DIMENSIONS
CBD3W3M00000
CBD5W5M00000
Shell Sizes 1 & 2 =
0.265±0.015 [6.73±0.38]
Shell Sizes 3, 4, 5 & 6 =
0.256±0.015 [6.50±0.38]
B
B1
M
K
G
10° Typ.
0.050±0.010
[1.27±0.25]
H
E
D1
D
C
A
0.036±0.008
[0.91±0.20]
0.220 [5.59]
Max.
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
OPTIONAL SHELL ASSEMBLY (0, 02)
OPTIONAL SHELL ASSEMBLY
WITH UNIVERSAL FLOAT MOUNTS (F)
0.120±0.010 [3.05±0.25]
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
for stainless steel shell (0 option)
Ø0.154 [3.91] Mounting hole,
two places (02 option)
0.032 [0.81]
Total diametral float
Ø0.086+0.005 Ø2.18+0.13
-0.00
-0.000
Mounting hole, two places
[
]
SHELL SIZES
SHELL SIZE 1 MALE
SHELL SIZE 1 FEMALE
SHELL SIZE 2 MALE
SHELL SIZE 2 FEMALE
SHELL SIZE 3 MALE
SHELL SIZE 3 FEMALE
SHELL SIZE 4 MALE
SHELL SIZE 4 FEMALE
SHELL SIZE 5 MALE
SHELL SIZE 5 FEMALE
SHELL SIZE 6 MALE
SHELL SIZE 6 FEMALE
A
±0.015
[0.38]
1.213
[30.81]
1.213
[30.81]
1.541
[39.14]
1.541
[39.14]
2.088
[53.04]
2.088
[53.04]
2.729
[69.32]
2.729
[69.32]
2.635
[66.93]
2.635
[66.93]
2.729
[69.32]
2.729
[69.32]
B
±0.005
[0.13]
B1
±0.005
[0.13]
0.666
[16.92]
C
±0.005
[0.13]
0.984
[24.99]
0.984
[24.99]
1.312
[33.32]
1.312
[33.32]
1.852
[47.04]
1.852
[47.04]
2.500
[63.50]
2.500
[63.50]
2.406
[61.11]
2.406
[61.11]
2.500
[63.50]
2.500
[63.50]
D
±0.005
[0.13]
D1
±0.005
[0.13]
0.329
[8.36]
E
±0.015
[0.38]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.494
[12.55]
0.605
[15.37]
0.605
[15.37]
0.668
[16.97]
0.668
[16.97]
G
±0.010
[0.25]
0.759
[19.28]
0.759
[19.28]
1.083
[27.51]
1.083
[27.51]
1.625
[41.28]
1.625
[41.28]
2.272
[57.71]
2.272
[57.71]
2.178
[55.32]
2.178
[55.32]
2.302
[58.47]
2.302
[58.47]
H
±0.010
[0.25]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.422
[10.72]
0.534
[13.56]
0.534
[13.56]
0.596
[15.14]
0.596
[15.14]
K
±0.005
[0.13]
0.233
[5.92]
0.243
[6.17]
0.233
[5.92]
0.243
[6.17]
0.230
[5.84]
0.243
[6.17]
0.230
[5.84]
0.243
[6.17]
0.230
[5.84]
0.243
[6.17]
0.230
[5.84]
0.243
[6.17]
M
±0.010
[0.25]
0.422
[10.72]
0.429
[10.90]
0.422
[10.72]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
0.426
[10.82]
0.429
[10.90]
0.643
[16.33]
0.994
[25.25]
0.971
[24.66]
1.534
[38.96]
1.511
[38.38]
2.182
[55.42]
2.159
[54.84]
2.079
[52.81]
2.064
[52.43]
2.212
[56.18]
2.189
[55.60]
0.311
[7.90]
0.329
[8.36]
0.311
[7.90]
0.329
[8.36]
0.311
[7.90]
0.329
[8.36]
0.311
[7.90]
0.441
[11.20]
0.423
[10.74]
0.503
[12.78]
0.485
[12.32]
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
6
CBD/CBM SERIES
PROFESSIONAL, INDUSTRIAL AND MILITARY QUALITY
THREE PERFORMANCE LEVELS FOR BEST COST/PERFORMANCE RATIO
Positronic Industries
connectpositronic.com
STANDARD DENSITY PCB MOUNT
C
ombo-
D
D
-
S
ub
SOLDER CUP CONNECTOR
CODE 2
Fixed female
jackscrews
20 AWG max.
[0.5 mm
2
]
Fixed female
jackscrew
Fixed male
jackscrew
CBD/CBM SERIES
7
0.125
[3.18]
0.345
[8.76]
For solder cup contacts,
specify code 2 in step 4
of ordering information.
Fixed male and female polarized jackscrews available.
Specify code T6 in step 7 of ordering information.
Typical part number: CBD7W2M200T60
Typical part number: CBD7W2M200T0
CBD17W2F200E0 with FS4008D contacts.
CBD17W2M55B30T20
STRAIGHT PRINTED BOARD MOUNT CONNECTOR
CODE 3, 35, 36 AND 37
For Code 93 Press-Fit Board Mount Connectors, see page 20.
CONTACT
CODE
3
Swaged spacer with
push-on fastener,
phosphor bronze.
0.010 [0.25]
Nominal
0.250
[6.35]
0.028 Ø
[0.71]
Fixed female jackscrews
DØ
---------
0.078
[1.98]
0.094
[2.39]
0.125
[3.18]
35
36
0.170
[4.32]
37
Typical part number: CBD17W2F35S60T2X
For straight printed board
mount contacts, specify
code no. in step 4 of
ordering information.
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
京公网安备 11010802033920号
EEWORLD
