800(e3) and 801(e3) series
Available
Three Phase Ultrafast Bridge Rectifiers
DESCRIPTION
This series of high-current three-phase bridge rectifiers are constructed with hermetically
sealed rectifiers built with the same design and construction techniques used in military
applications for the upmost in reliability. These include voidless glass encapsulation and
internal "Category 1" metallurgical bonds. These 25 A & 40 A ultrafast rectifier bridges are
available with working peak reverse voltage ratings up to 150 V per leg.
(Actual appearance may vary)
Important:
For the latest information, visit our website
http://www.microsemi.com.
FEATURES
•
•
•
•
•
•
•
Current ratings to 40 amps
V
RWM
from 50 to 150 volts (see
part nomenclature
for all options)
150 ºC junction temperature
Surge ratings to 250 amps
Recovery times to 25 ns
MIL-PRF-19500 similarity
RoHS compliant versions available
ME Package
APPLICATIONS / BENEFITS
•
•
Fused-in voidless glass diodes used in each leg
Electrically isolated aluminum heat sink case
MAXIMUM RATINGS
Parameters/Test Conditions
Junction and Storage Temperature
Thermal Resistance Junction-to-Case:
Thermal Resistance Junction-to-Ambient:
Forward Surge Current (Peak):
Maximum Average DC Output Current:
@ T
C
= 55 ºC
Maximum Average DC Output Current:
@ T
C
= 100 ºC
Solder Temperature @ 10 s
Symbol
T
J
and T
STG
R
ӨJC
R
ӨJA
I
FSM
I
O
I
O
Value
-65 to +150
1.5
3.0
20
250
125
40
25
20
16
260
Unit
ºC
ºC/W
ºC/W
A
A
A
o
800
801
800
801
800
801
800
801
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
C
RF01152, Rev A, (12/19/13)
©2013 Microsemi Corporation
Ph: 949-380-6100
sales.support@microsemi.com
Page 1 of 7
One Enterprise, Aliso Viejo, CA 92656
800(e3) and 801(e3) series
MECHANICAL and PACKAGING
•
•
•
CASE: Aluminum
TERMINALS: Tin/lead or RoHS compliant matte tin
MARKING: Alternating current input: AC
Cathode positive output: +
Anode negative: -
Part number is printed on the body
WEIGHT: Approximately 30 grams
See
Package Dimensions
on last page.
•
•
PART NOMENCLATURE
801
Series type number
V
RRM
level
-1 = 50 V
-2 = 100 V
-3 = 125 V
-4 = 150 V
-1
e3
RoHS Compliance
e3 = RoHS compliant
Blank = non-RoHS compliant
Symbol
I
FSM
I
O
V
F
I
R
V
RWM
t
rr
SYMBOLS & DEFINITIONS
Definition
Surge Peak Forward Current: The forward current including all nonrepetitive transient currents but excluding all
repetitive transients (ref JESD282-B)
Average Rectified Output Current: The Output Current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave
input and a 180 degree conduction angle.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and
temperature.
Working Peak Reverse Voltage: The peak voltage excluding all transient voltages (ref JESD282-B). Also sometimes
known historically as PIV.
Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from
the forward direction to the reverse direction and a specified decay point after a peak reverse current occurs.
RF01152, Rev A, (12/19/13)
©2013 Microsemi Corporation
Ph: 949-380-6100
sales.support@microsemi.com
Page 2 of 7
One Enterprise, Aliso Viejo, CA 92656
800(e3) and 801(e3) series
ELECTRICAL CHARACTERISTICS
MAX FORWARD
VOLTAGE
PER LEG
V
F
(Note 1)
@ 25 ºC
Volts
800
801
0.95 @ 10 A
0.95 @ 6 A
MAX REVERSE
PEAK CURRENT
I
R
@ V
RRM
MAX REVERSE
RECOVERY
TIME
t
rr
I
F
= 0.5 A,
I
RM
= 1.0 A,
I
R(REC)
= 0.250 A
ns
50
50
PART
NUMBER
@ 25 ºC
µA
20
10
@ 100 ºC
µA
1000
300
NOTES: 1.
MAX WORKING PEAK REVERSE VOLTAGE (V
RWM
) numbering:
PART NUMBER
WORKING
PEAK
REVERSE
VOLTAGE
V
RWM
Volts
50
100
125
150
MINIMUM
BREAKDOWN
VOLTAGE
V
(BR)
Volts
55.0
110.0
137.5
165.0
800-1
800-2
800-3
800-4
801-1
801-2
801-3
801-4
2.
Pulse test: Pulse width 300
µsec,
duty cycle 2%.
RF01152, Rev A, (12/19/13)
©2013 Microsemi Corporation
Ph: 949-380-6100
sales.support@microsemi.com
Page 3 of 7
One Enterprise, Aliso Viejo, CA 92656
800(e3) and 801(e3) series
GRAPHS
Leakage Current -
µA
Instantaneous Forward Current - Amperes
Instantaneous Forward Voltage – Volts
FIGURE 1
Typical Forward Characteristics –
Per Leg 800 Series
% of Rated Voltage
FIGURE 2
Typical Reverse Leakage Current –
Per Leg 800 Series
RF01152, Rev A, (12/19/13)
©2013 Microsemi Corporation
Ph: 949-380-6100
sales.support@microsemi.com
Page 4 of 7
One Enterprise, Aliso Viejo, CA 92656
800(e3) and 801(e3) series
GRAPHS
(continued)
Output Current (ADC)
Case Temperature -°C
FIGURE 3
Current Derating
RF01152, Rev A, (12/19/13)
Leakage Current -
µA
Instantaneous Forward Voltage - Volts
FIGURE 4
Typical Forward Characteristics –
Per Leg 801 Series
©2013 Microsemi Corporation
Ph: 949-380-6100
sales.support@microsemi.com
Page 5 of 7
One Enterprise, Aliso Viejo, CA 92656
京公网安备 11010802033920号
EEWORLD
