11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 2
AudioMAX™
I N T E G R A T E D
P R O D U C T S
LX1721 / 1722
Class-D Stereo Power Amplifier Controller
P
RODUCTION
FUNCTIONAL PIN DESCRIPTION
P
IN
N
AME
LFAOUT
CPWM
RPWM
LMUTE
LEAOUT
LEAIN
VREF
CLOCK
GND
V25
LIN+
LIN-
LAMPOUT
RIN+
RIN-
RAMPOUT
D
ESCRIPTION
Left Feedback Amplifier Output
PWM Capacitor Connection
PWM Resistor Connection
Left Mute Input (Active High)
Left Error Amplifier Output
Left Inverting Input of Error Amplifier
5V Reference
Input / Output Clock for Synch Operation
Low Current Ground
2.5V Reference
Left Positive Audio Input
Left Negative Audio Input
Left Input Amplifier Output
Right Positive Audio Input
Right Negative Audio Input
Right Input Amplifier Output
Sleep Input (active low)
UVLO Indicator (Open Collector Output)
Right Mute Input (Active High)
Right Inverting Input of Error Amplifier
Right Error Amplifier Output
Right Feedback Amplifier Output
P
IN
N
AME
LFBK-
LFBK+
LISN
VDD
CN
PVDD
PGND
LN+
LP+
LP-
LN-
RN-
RP-
RP+
RN+
PGND
CP
PVDD
NC
RISN
RFBK+
RFBK-
D
ESCRIPTION
Left Feedback Amplifier Inverting Input
Left Feedback Amplifier Non-Inverting
Input
Left Current Limit Sense Input
Analog Supply Voltage
Supply Decoupling for NFET Drivers
Output Driver Supply Voltage
Output Driver High Current Ground
Left Drive for NFET on Positive Half of
Bridge
Left Drive for PFET on Positive Half of
Bridge
Left Drive for PFET on Negative Half of
Bridge
Left Drive for NFET on Negative Half of
Bridge
Right Drive for NFET on Negative Half of
Bridge
Right Drive for PFET on Negative Half of
Bridge
Right Drive for PFET on Positive Half of
Bridge
Right Drive for NFET on Positive Half of
Bridge
Output Driver High Current Ground
Supply Decoupling for PFET Drivers
Output Driver Supply Voltage
No Connect
Right Current Limit Sense Input
Left Feedback Amplifier Non-Inverting
Input
Right Feedback Amplifier Inverting Input
WWW .
Microsemi
.C
OM
SLEEP
STATUS
RMUTE
REAIN
REAOUT
RFAOUT
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (PVDD, VDD) ............................................................................................................................. -0.3V to 30V
SLEEP
,
STATUS, R/LFBK+, R/LFBK- .................................................................................................-0.3V to VDD +0.3V
R/LISN .........................................................................................................................................PVDD –2 to PVDD to +0.3V
RPWM, CPWM, R/LMUTE ................................................................................................................... -0.3V to VREF +0.3V
R/LIN+, R/LIN-, R/LAMPOUT.............................................................................................................. -0.3V to VREF +0.3V
R/LEAIN, R/LEAOUT, R/LFAOUT ..................................................................................................... -0.3V to VREF + 0.3V
CLOCK ........................................................................................................................................................-0.3V to CN +0.3V
Operating Junction Temperature Plastic........................................................................................................................... 125°C
Storage Temperature Range ...............................................................................................................................-65°C to 150°C
Lead Temperature (Soldering, 10 seconds) ...................................................................................................................... 300°C
Note: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground. Currents are positive into negative out of the
I want to design a dial-up server on WinCE 5.0 platform, but I have no relevant experience. I don't know which expert can give me some advice. Thank you very much....
The power supply voltage is measured directly using ADC and calculated as follows:This is the VREF problem. The formula uses 2.4V, so I substituted it in and calculated it. The result is quite good at...
[hide]1: The origin of the wall washer: The wall washer comes from the English word wash wall, which is translated into Chinese as the wall washer. LED wall washer is also called linear LED floodlight...
In early 2002, I started to write a working program for an IC card prepaid electricity meter. The meter used Philips' 8-bit 51-expanded single-chip microcomputer
87LPC764
, and wa...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
5. Identifiers and keywords of C language
A complete PIC microcontroller C language program usually consists of six parts: include files (i.e. header files 1, variable definitions, variable de...[Details]
The automotive lighting and signal control system is responsible for controlling the vehicle's lighting, signal lights, electric horns, reversing and brake buzzers. Traditional automotive lighting...[Details]
The typical fault troubleshooting listed below is for reference of maintenance personnel.
When the computer is turned on, the indicator light is off and there is no screen display
Mainte...[Details]
VP2188 is a color STN LCD module produced by Jingdian Pengyuan. This module is a dot matrix transmissive color STN display screen with a color scale of 65 k colors and white LED backlight. Its core...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
OC faults may be the most frequent and the most frequent of all faults in the inverter. They alarm during the startup process, during the shutdown process, during operation, and even when powered o...[Details]
Abstract: In recent years, with the establishment and grid-connected power generation of a large number of solar photovoltaic power stations at home and abroad, photovoltaic grid-connected inverter...[Details]
Preface
In recent years, white light LEDs have gradually replaced incandescent bulbs and fluorescent lamps because they have unparalleled advantages over traditional light sources in terms...[Details]
0 Introduction
With the rapid development of social economy and science and technology, electric locomotives, subways and electric vehicles will be widely used. The power conversion and cont...[Details]
The power consumption of a switching power supply includes fixed losses caused by parasitic resistances such as semiconductor switches, magnetic components, and wiring, as well as switching losses ...[Details]
When developing electronic products with processors, how to improve anti-interference ability and electromagnetic compatibility?
1. The following systems should pay special attention to anti-...[Details]
At present,
the control system used in
automobiles
can be divided into three parts from the functional point of view:
sensor
unit, control unit and execution unit. Among them,
th...[Details]
The number of timers/counters and interrupt sources directly determines the performance of the microcontroller. The MCS-51 microcontroller has two programmable 16-bit timers/counters and five inter...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
