— Data can be continuously read from one bank while
executing erase/program functions in another bank.
— Zero latency between read and write operations
Multiple Bank architecture
— Four bank architectures available (refer to Table
2).
Boot Sectors
— Top and bottom boot sectors in the same device
— Any combination of sectors can be erased
Manufactured on 0.13 µm process technology
SecSi™ (Secured Silicon) Sector: Extra 256 Byte
sector
—
Factory locked and identifiable:
16 bytes available for
secure, random factory Electronic Serial Number;
verifiable as factory locked through autoselect
function.
—
Customer lockable:
One-time programmable only.
Once locked, data cannot be changed
Zero Power Operation
— Sophisticated power management circuits reduce
power consumed during inactive periods to nearly
zero.
Compatible with JEDEC standards
— Pinout and software compatible with single-power-
supply flash standard
Ultra low power consumption (typical values)
— 2 mA active read current at 1 MHz
— 10 mA active read current at 5 MHz
— 200 nA in standby or automatic sleep mode
Cycling Endurance: 1 million cycles per sector
typical
Data Retention: 20 years typical
ADVANCE INFORMATION
Software Features
Supports Common Flash Memory Interface (CFI)
Erase Suspend/Erase Resume
— Suspends erase operations to read data from, or
program data to, a sector that is not being erased,
then resumes the erase operation.
Data# Polling and Toggle Bits
— Provides a software method of detecting the status of
program or erase cycles
Unlock Bypass Program command
— Reduces overall programming time when issuing
multiple program command sequences
Hardware Features
Ready/Busy# output (RY/BY#)
— Hardware method for detecting program or erase
cycle completion
Hardware reset pin (RESET#)
— Hardware method of resetting the internal state
machine to the read mode
WP#/ACC input pin
— Write protect (WP#) function protects the two
outermost boot sectors regardless of sector protect
status
— Acceleration (ACC) function accelerates program
timing
Sector protection
— Hardware method to prevent any program or erase
operation within a sector
— Temporary Sector Unprotect allows changing data in
protected sectors in-system
Package options
48-pin TSOP
Performance Characteristics
High performance
— Access time as fast as 55 ns
— Program time: 4 µs/word typical using accelerated
programming function
Publication Number
S29JL032H
Revision
A
Amendment
0
Issue Date
May 21, 2004
This document contains information on a product under development at FASL LLC. The information is intended to help you evaluate this product. FASL LLC reserves the
right to change or discontinue work on this proposed product without notice.
A D V A N C E
I N F O R M A T I O N
General Description
The S29JL032H is a 32 megabit, 3.0 volt-only flash memory device, organized as
2,097,152 words of 16 bits each or 4,194,304 bytes of 8 bits each. Word mode
data appears on DQ15–DQ0; byte mode data appears on DQ7–DQ0. The device
is designed to be programmed in-system with the standard 3.0 volt V
CC
supply,
and can also be programmed in standard EPROM programmers.
The device is available with an access time of 55, 60, 70, or 90 ns and is offered
in a 48-pin TSOP package. Standard control pins—chip enable (CE#), write en-
able (WE#), and output enable (OE#)—control normal read and write operations,
and avoid bus contention issues.
The device requires only a
single 3.0 volt power supply
for both read and write
functions. Internally generated and regulated voltages are provided for the pro-
gram and erase operations.
Simultaneous Read/Write Operations with Zero Latency
The Simultaneous Read/Write architecture provides
simultaneous operation
by dividing the memory space into separate banks (see Table
2).
Sector ad-
dresses are fixed, system software can be used to form user-defined bank
groups.
During an Erase/Program operation, any of the non-busy banks may be read
from. Note that only two banks can operate simultaneously. The device can im-
prove overall system performance by allowing a host system to program or erase
in one bank, then immediately and simultaneously read from the other bank, with
zero latency. This releases the system from waiting for the completion of program
or erase operations.
The S29JL032H can be organized as both a top and bottom boot sector
configuration.
S29JL032H Features
The
SecSi™ (Secured Silicon) Sector
is an extra 256 byte sector capable of
being permanently locked by FASL or customers. The SecSi Customer Indicator
Bit (DQ6) is permanently set to 1 if the part has been customer locked, perma-
nently set to 0 if the part has been factory locked, and is 0 if customer lockable.
This way, customer lockable parts can never be used to replace a factory locked
part.
Factory locked parts provide several options. The SecSi Sector may store a se-
cure, random 16 byte ESN (Electronic Serial Number), customer code
(programmed through Spansion programming services), or both. Customer Lock-
able parts may utilize the SecSi Sector as bonus space, reading and writing like
any other flash sector, or may permanently lock their own code there.
DMS (Data Management Software)
allows systems to easily take advantage
of the advanced architecture of the simultaneous read/write product line by al-
lowing removal of EEPROM devices. DMS will also allow the system software to
be simplified, as it will perform all functions necessary to modify data in file struc-
tures, as opposed to single-byte modifications. To write or update a particular
piece of data (a phone number or configuration data, for example), the user only
needs to state which piece of data is to be updated, and where the updated data
is located in the system. This is an advantage compared to systems where user-
written software must keep track of the old data location, status, logical to phys-
ical translation of the data onto the Flash memory device (or memory devices),
2
S29JL032H
S29JL032HA0 May 21, 2004
A D V A N C E
I N F O R M A T I O N
and more. Using DMS, user-written software does not need to interface with the
Flash memory directly. Instead, the user's software accesses the Flash memory
by calling one of only six functions.
The device offers complete compatibility with the
JEDEC 42.4 sin-
gle-power-supply Flash command set standard.
Commands are written to
the command register using standard microprocessor write timings. Reading data
out of the device is similar to reading from other Flash or EPROM devices.
The host system can detect whether a program or erase operation is complete by
using the device
status bits:
RY/BY# pin, DQ7 (Data# Polling) and DQ6/DQ2
(toggle bits). After a program or erase cycle has been completed, the device au-
tomatically returns to the read mode.
The
sector erase architecture
allows memory sectors to be erased and repro-
grammed without affecting the data contents of other sectors. The device is fully
erased when shipped from the factory.
Hardware data protection
measures include a low V
CC
detector that automat-
ically inhibits write operations during power transitions. The
hardware sector
protection
feature disables both program and erase operations in any combina-
tion of the sectors of memory. This can be achieved in-system or via
programming equipment.
The device offers two power-saving features. When addresses have been stable
for a specified amount of time, the device enters the
When is the STM8 ADC continuous mode EOC cleared?
In continuous mode, the ADC converts continuously: EOC is set, then cleared, and then converted again. Is this correct?
If so, how do we reference the...
I haven't paid attention to the development of M3 for a long time. Today, I updated the progress and found that the original LuminaryMicro website has gone with the wind and has moved to the TI offici...
[color=#000][backcolor=rgb(209, 217, 226)][font=Simsun]Can the serial communication select the output mode from high byte to low byte? [/font][/backcolor][/color] [color=#000][backcolor=rgb(209, 217, ...
summary
WLED solutions integrate the advantages of white light LED technology and innovative energy-saving solutions (such as ambient light control lighting), so that they can be applied in a wider ra...
What is the difference between a memory controller and an MMU? I am using the DaVinci series of processors, which include ARM926, VPSS (mainly used for video processing), and DSP. These things all wor...
There is a piece of board with an empty space on it, about 5CM*5CM. I happen to have a small board inside the 5CM*5CM area. I want to dig it out and make other small boards. How should I cut it in the...
Today's computer peripherals are pursuing high speed and high versatility. In order to meet user needs, seven companies led by Intel launched the USB (Universal Serial Bus) bus protocol in 1994, wh...[Details]
introduction
my country has a vast territory and a large population. The scale of housing construction is huge, and the amount of residential construction is large and wide. It is still on t...[Details]
Analog engineers have traditionally struggled with complexity when designing power supplies that required multiple outputs, dynamic load sharing, hot-swap, or extensive fault-handling capabilities....[Details]
Abstract: In order to generate a stable excitation signal, the design of a digital frequency synthesizer is implemented on FPGA using Verilog hardware language. The design includes accumulator, wav...[Details]
The reason for the light decay of white LEDs: the decline of phosphor performance
So far, the rapid decline of the luminous performance of white light LEDs, especially low-power white light LE...[Details]
When choosing a laptop battery, you should consider several factors, such as power, appearance, and quality.
Regarding power, we often see that a manufacturer uses values such as the number ...[Details]
Images in science fiction movies often break through the limits of reality, such as in the movie "Minority Report." Tom Cruise uses a multi-touch screen to browse information. Capacitive sensing te...[Details]
The solidification and modularization of intelligent video analysis algorithms are the current trends in the application of intelligent video analysis technology. It perfectly combines intelligent ...[Details]
Xiaomi, a well-known Internet phone in mainland China, won a million-unit order contract from China Unicom on November 20 last year, which made Xiaomi famous in mainland China. In April this year...[Details]
This controller uses PIC16C54 single-chip microcomputer as the controller, and it is very easy to use: just connect a telephone line to the loudspeaker through the controller, and you can rem...[Details]
Introduction
Nowadays, people pay more and more attention to the security alarm system, and people have higher and higher requirements for the functions and performance of the alarm. This paper prop...[Details]
Traditional
virtual instruments
consist of a data acquisition
board
based on PCI bus and
corresponding software. However, with
the rapid development of
computer
network techno...[Details]
0 Introduction
In order to improve the automation control of shortwave transmitters, so that they can automatically process from far to near, the technicians here use the ICS system to complete the ...[Details]
Distributed Wireless Communication System (DWCS) uses distributed antennas, distributed processing control, joint signal processing and other technologies to improve the system's spectrum efficie...[Details]
Every time I go home and walk up the stairs, I am always scared. The corridor lights are often broken, and no one changes the bulbs, or they are not smart enough and need to be operated manually. E...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
