6N135/6, HCNW135/6, HCNW4502/3
HCPL-2502/0452/0453/0500/0501/4502/4503
Single Channel, High Speed Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
These diode-transistor optocouplers use an insulating
layer between a LED and an integrated photodetector to
provide electrical insulation between input and output.
Separate connections for the photodiode bias and out-
put-transistor collector increase the speed up to a hun-
dred times that of a conventional phototransistor coupler
by reducing the base-collector capacitance.
These single channel optocouplers are available in
8-Pin DIP, SO-8 and Widebody package configurations.
The 6N135, HCPL-0500, and HCNW135 are for use in TTL/
CMOS, TTL/LSTTL or wide bandwidth analog applications.
Current transfer ratio (CTR) for these devices is 7% mini-
mum at I
F
= 16 mA.
The 6N136, HCPL-2502, HCPL-0501, and HCNW136 are
designed for high speed TTL/TTL applications. A standard
16 mA TTL sink current through the input LED will pro-
vide enough output current for 1 TTL load and a 5.6 kΩ
pull-up resistor. CTR for these devices is 19% minimum at
I
F
= 16 mA.
Features
•
15 kV/µs minimum common mode transient
immunity at V
CM
= 1500 V (4503/0453)
•
High speed: 1 Mb/s
•
TTL compatible
•
Available in 8-Pin DIP, SO-8, widebody packages
•
Open collector output
•
Guaranteed performance from temperature:
0°C to 70°C
•
Safety approval
UL Recognized – 3750 V
rms
for 1 minute (5000 V
rms
for 1 minute for HCNW and Option 020 devices)
per UL1577
CSA Approved
IEC/EN/DIN EN 60747-5-2 Approved
– V
IORM
= 630 V peak for HCPL-4503#060
– V
IORM
= 1414 V peak for HCNW devices
•
Dual channel version available
(253X/4534/053X/0534)
•
MIL-PRF-38534 hermetic version available
(55XX/65XX/4N55)
Functional Diagram
NC 1
ANODE 2
CATHODE 3
NC 4
8 V
CC
*
7 V
B
6 V
O
5 GND
Applications
TRUTH TABLE
(POSITIVE LOGIC)
V
O
LED
ON
LOW
OFF
HIGH
•
•
•
•
•
•
* NOTE: FOR 4502/3, 0452/3,
PIN 7 IS NOT CONNECTED.
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
High voltage insulation
Video signal isolation
Power transistor isolation in motor drives
Line receivers
Feedback element in switched mode power supplies
High speed logic ground isolation
– TTL/TTL, TTL/CMOS, TTL/LSTTL
•
Replaces pulse transformers
•
Replaces slow phototransistor isolators
•
Analog signal ground isolation
CAUTION:
It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
The HCPL-4502, HCPL-0452, and HCNW4502 provide the
electrical and switching performance of the 6N136, HCPL-
0501, and HCNW136 with increased ESD protection.
The HCPL-4503, HCPL-0453, and HCNW4503 are similar to
the HCPL-4502, HCPL-0452, and HCNW4502 optocouplers
but have increased common mode transient immunity of
15 kV/µs minimum at V
CM
= 1500 V guaranteed.
Schematic
I
CC
8
V
CC
ANODE
2
+
V
F
I
F
CATHODE
-
3
I
O
6
V
O
SHIELD
HCPL-4503/0453
HCNW4503
5
I
B
GND
7 *
V
B
* NOTE: FOR HCPL-4502/-3, HCPL-0452/3,
HCNW4502/3, PIN 7 IS NOT CONNECTED.
Selection Guide
Minimum CMR
dV/dt
(V/µs)
1,000
V
CM
(V)
10
8-Pin DIP (300 Mil)
Current
Single
Transfer
Channel
Ratio (%)
Package
7
19
15
6N135
6N136
HCPL-4502†
HCPL-2502
HCPL-4503†
Small-Outline SO-8
Dual
Single
Channel
Channel
Package*
Package
HCPL-2530
HCPL-2531
HCPL-0500
HCPL-0501
HCPL-0452†
HCPL-0453†
(400 Mil)
Dual
Channel
Package*
HCPL-0530
HCPL-0531
Widebody
Hermetic
Single
Channel
Package
HCNW135
HCNW136
HCNW4502†
HCNW4503†
Single and
Dual Channel
Packages*
15,000
1,000
1500
10
19
9
HCPL-4534
HCPL-0534
HCPL-55XX
HCPL-65XX
4N55
*Technical data for these products are on separate Avago publications.
†Pin 7, transistor base, is not connected.
2
Ordering Information
6N135, 6N136, HCPL-2502, HCPL-4502 and HCPL-4503, HCPL-0452, HCPL-0453, HCPL-0500, HCPL-0501 are UL Recog-
nized with 3750 Vrms for 1 minute per UL1577.
HCNW135, HCNW136, HCNW4502 and HCNW4503 are UL Recognized with 5000 Vrms for 1 minute per UL1577. All de-
vices above listed are approved under CSA Component Acceptance Notice #5, File CA 88324.
Option
Part number
RoHS
Compliant
-000E
-300E
6N135
6N136
HCPL-2502
HCPL-4502
HCPL-4503
-500E
-020E
-320E
-520E
-060E
-360E
-560E
HCPL-0452
HCPL-0453
HCPL-0500
HCPL-0501
HCNW135
HCNW136
HCNW4502
HCNW4503
-000E
-500E
-060E
-560E
-000E
-300E
-500E
Non RoHS
Compliant
No option
#300
#500
#020
#320
#520
#060
#360
#560
No option
#500
#060
#560
No option
#300
#500
400mil
Widebody
DIP-8
SO-8
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
300mil
DIP-8
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Package
Surface
Mount
Gull
Wing
Tape
& Reel
UL 5000
Vrms/ 1 Minute
rating
IEC/EN/DIN
EN 60747-5-2
Quantity
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
100 per tube
1500 per reel
100 per tube
1500 per reel
42 per tube
42 per tube
750 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-4502-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-2 Safety Approval in RoHS compliant.
Example 2:
HCPL-4502 to order product of 300mil DIP package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and RoHS
compliant option will use ‘-XXXE‘.
3
Package Outline Drawings
8-Pin DIP Package (6N135/6, HCPL-4502/3, HCPL-2502)
9.65 ± 0.25
(0.380 ± 0.010)
TYPE NUMBER
8
7
6
5
OPTION CODE*
DATE CODE
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
A XXXXZ
YYWW RU
1
1.19 (0.047) MAX.
2
3
4
UL
RECOGNITION
1.78 (0.070) MAX.
5¡ TYP.
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
DIMENSIONS IN MILLIMETERS AND (INCHES).
*MARKING CODE LETTER FOR OPTION NUMBERS
"L" = OPTION 020
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
8-Pin DIP Package with Gull Wing Surface Mount Option 300 (6N135/6, HCPL-4502/3)
LAND PATTERN RECOMMENDATION
9.65 ± 0.25
(0.380 ± 0.010)
8
7
6
5
1.016 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
1
2
3
4
10.9 (0.430)
1.27 (0.050)
1.780
(0.070)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
2.0 (0.080)
1.19
(0.047)
MAX.
3.56 ± 0.13
(0.140 ± 0.005)
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
1.080 ± 0.320
(0.043 ± 0.013)
0.635 ± 0.130
2.54
(0.025 ± 0.005)
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.25
(0.025 ± 0.010)
12¡ NOM.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
4
Small Outline SO-8 Package (HCPL-0500/1, HCPL-0452/3)
LAND PATTERN RECOMMENDATION
8
7
6
5
3.937 ± 0.127
(0.155 ± 0.005)
PIN ONE
1
2
XXX
YWW
5.994 ± 0.203
(0.236 ± 0.008)
TYPE NUMBER
(LAST 3 DIGITS)
DATE CODE
7.49 (0.295)
3
4
1.9 (0.075)
0.406 ± 0.076
(0.016 ± 0.003)
1.270 BSC
(0.050)
0.64 (0.025)
*
5.080 ± 0.127
(0.200 ± 0.005)
3.175 ± 0.127
(0.125 ± 0.005)
7¡
45¡ X
0.432
(0.017)
1.524
(0.060)
0 ~ 7¡
0.228 ± 0.025
(0.009 ± 0.001)
*
TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH)
5.207 ± 0.254 (0.205 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
0.203 ± 0.102
(0.008 ± 0.004)
0.305 MIN.
(0.012)
8-Pin Widebody DIP Package (HCNW135/6, HCNW4502/3)
11.15 ± 0.15
(0.442 ± 0.006)
8
7
6
5
11.00 MAX.
(0.433)
9.00 ± 0.15
(0.354 ± 0.006)
A
HCNWXXXX
YYWW
1
2
3
4
TYPE NUMBER
DATE CODE
1.55
(0.061)
MAX.
10.16 (0.400)
TYP.
7¡ TYP.
+ 0.076
0.254 - 0.0051
+ 0.003)
(0.010 - 0.002)
5.10 MAX.
(0.201)
3.10 (0.122)
3.90 (0.154)
2.54 (0.100)
TYP.
1.78 ± 0.15
(0.070 ± 0.006)
0.40 (0.016)
0.56 (0.022)
0.51 (0.021) MIN.
DIMENSIONS IN MILLIMETERS (INCHES).
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
5
京公网安备 11010802033920号
EEWORLD
