Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Nominal Operating Parameters
Specification
Parameter
Min
Typ
Max
Unit
Condition
General Performance
RF Frequency
LO Frequency
IF Frequency
LO Input Drive
Conversion Gain
NF (17.7GHz to 19.7GHz)
NF (21.2GHz to 23.6GHz)
NF (24.5GHz to 26.5GHz)
IIP3
Image Rejection
LO-RF Isolation
LO-IF Isolation
LO Return Loss
RF Return Loss
V
D
I
D
17.7
6.85
DC
+5
13
2.5
2.7
2.9
6
15
40
15
12
12
3 to 5
350
26.5
15.25
4.0
GHz
GHz
GHz
dBm
dB
dB
dB
dB
dBm
dB
dB
dB
dB
dB
V
mA
NOTES: Measurements performed on part soldered on evaluation board with SMA connectors and IF ports connected to an external 90° Hybrid Combiner
and LO Power of +5dBm and at 25°C, unless otherwise stated.
IF = 2.5GHz, RF Power = -20dBm, IIP3 is measured with a 2-tone input of -23dBm power for each tone and Δf = 10MHz, Vd1 = 3V, Vd2 = 4V, Vd3 through
Vd5 = 5V, MixerBias = 0V
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
DS131025
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 7
RFRX1701
Typical Electrical Performance
Measurements performed on part soldered on evaluation board with SMA connectors and IF ports
connected to an external 90° Hybrid Combiner and LO Power of +5dBm, unless otherwise stated.
IF = 2.5GHz, RF Power = -20dBm, IIP3 is measured with a 2-tone input of -23dBm power for each tone and
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
DS131025
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 7
RFRX1701
Typical Electrical Performance (continued)
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
DS131025
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 7
RFRX1701
Pin Out
Pin Names and Descriptions
Pin
1-4
5
6
7
8-9
10
11
12
13
14
15
16
17
18
19
20-24
25
26
27
28
29
30
31
32
Name
N/C
GND
RF
GND
N/C
GND
IF1
GND
IF2
GND
Mixer Bias
N/C
GND
LO
GND
N/C
Vd5
Vd4
N/C
Vd3
N/C
Vd2
N/C
Vd1
Not Connected
Ground
RF Input, AC coupled and matched to 50Ω
Ground
Not Connected
Ground
IF1 Output
Ground
IF2 Output
Ground
Mixer Bias = 0V
Not Connected
Ground
LO Input, AC coupled and matched to 50Ω
Ground
Not Connected
Vd5 (LOA bias) = 5V
Vd4 (LOA bias) = 5V
Not Connected
Vd3 (LOA bias) = 5V
Not Connected
LNA drain bias2 = 4V
Not Connected
LNA drain bias1 = 3V
Description
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
DS131025
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
The LIN 2.1 standard states that each slave node must be ready to receive commands (frame headers) from the host within 100ms from the end of the dominant pulse of the wake-up signal. However, in real...
Time flies so fast, it seems like I was still vowing yesterday to “get rid of being single on Singles Day 2009!” and all of a sudden it’s Singles Day 2010 again. How come time flies so fast when I’m a...
[i=s]This post was last edited by dingzy_2002 on 2015-4-14 16:49[/i] After a few days of waiting, I received the board that Jiali Chuang had made a proofing. After a simple inspection, there was no pr...
The EZ430-F2013 USB emulator prompts an error when entering debug mode. Retrying does not work. When I unplug it and plug it back into the computer, it cannot be recognized. What is the problem? Can i...
According to foreign media reports, Ford Motor has applied to the U.S. Patent and Social Security Administration (USPTO) for a patent for a remote vehicle control system that may be used in future ...[Details]
Reflow soldering is a critical process in electronics assembly production, and the cleanliness of the reflow oven has a direct impact on product quality. Dust and residue accumulation within the ov...[Details]
Is electromagnetic radiation from electric vehicles harmful to the human body? Recently, the issue of electromagnetic radiation from electric vehicles has garnered widespread attention. However, pu...[Details]
As more and more consumers purchase new energy vehicles, the safety of electric vehicles has become a major concern. This has been particularly prominent following a series of electric vehicle fire...[Details]
"Have you set your calendar reminder?"
On August 24, Nvidia Robotics' official account posted a photo of a black gift box on a social media platform, with an attached greeting card sig...[Details]
We are entering a new era where people are increasingly affordably equipped with more electronic gadgets. Electronics have become essential to our lives. For example, the average consumer now owns ...[Details]
With the rapid adoption of smart electric vehicles, automotive chips are evolving from auxiliary control units to the foundation of the entire vehicle's intelligence. Their applications extend from...[Details]
Core point: The automotive industry chain and the humanoid robot industry have collaborative advantages in hardware, software, and scenarios. Upstream and downstream companies in the automotive ind...[Details]
Pure electric vehicles, structurally speaking, have components such as a power battery. In addition to the power battery, a small battery also powers some low-voltage electrical components and even...[Details]
With the advent of the electric car era, the number of pure electric vehicles has increased significantly, but many car owners do not know how to properly maintain pure electric vehicles. In additi...[Details]
In the electronics manufacturing industry, surface mount technology (SMT) placement machines are core equipment for production lines. However, with many different models available on the market, ch...[Details]
When American cartoonist Chester Gould sketched the watch on Dick Tracy's wrist, he had no idea that science fiction would become reality 70 years later. As a comic strip artist, Gould imagined fut...[Details]
1. Introduction
In 2015, Apple's new MacBook and Apple Watch both featured force-sensing technology, which Apple calls Force Touch. Each time a user presses the touchpad, the device not only p...[Details]
On August 20, Huawei Device announced that the all-new M7 is the first to feature an in-cabin laser vision solution. This solution offers enhanced active safety capabilities compared to primary vis...[Details]
Reasons for the wear of the roller press reducer shaft:
1. Since the expansion sleeve is subjected to a large torque, the mating surfaces of the shaft and the sleeve move relative to each other...[Details]
Mobile and portable
京公网安备 11010802033920号
EEWORLD
