RoHS Compliant
Value Added
CompactFlash Series 5
Specification for Industrial CompactFlash Card
September 27
th
, 2011
Version 1.0
Apacer Technology Inc.
4
th
Fl., 75 Hsin Tai Wu Rd., Sec.1, Hsichih, Taipei Hsien 221, Taiwan
Tel: +886-2-2698-2888
Fax: +886-2-2698-2889
www.apacer.com
Compact Flash 5 series
AP-CFxxxxK7XS-XXXXXX
Features:
CompactFlash Association Specification
Revision 4.1 Standard Interface
– 512 bytes per sector
– ATA command set compatible
– ATA transfer mode supports:
PIO Mode 6
Multiword DMA Mode 4
Ultra DMA Mode 6
PCMCIA UDMA Mode 6
Capacities
–
Standard:
128, 256, 512 MB
1, 2, 4 GB
–
High Speed:
256, 512 MB
1, 2, 4, 8, 16 GB
Standard read/write performance
–
Sustained read: Up to 29 MB/sec
–
Sustained write: Up to 20 MB/sec
High-speed read/write performance
–
Sustained read: Up to 50 MB/sec
– Sustained Write: Up to 30 MB/sec
Intelligent ATA/IDE module
– Embedded Flash File System (FFS)
–
Wear-leveling algorithms to substantially
increase longevity of flash media
– Built-in BCH ECC capable of correcting
up to 24 bits in 1,024 byte data
– Supports S.M.A.R.T commands
NAND Flash Type: SLC
Power Management Unit
– Immediate disabling of unused circuitry
without host intervention
– Zero wake-up latency
Power Smart Design
– Automatic sleep and wake-up mechanism
to save power
– Built-in 1.8V Power-On-Reset
– Built-in 2.6V Voltage detector for power
fail protection
– Supports on-chip and external voltage
regulator
Temperature ranges
– 0°C to 70°C for operation (Standard)
– -40°C to 85°C for operation (ET*)
– -40°C to 100°C for storage
Operating voltage for read and write
– 3.3 V
– 5.0 V
Power consumption (typical)**
– Active mode: 180 mA
– Sleep mode: 6 mA
Connector Type
– 50 pins female
Write Protect by Hardware Switch
– Write protect activated/deactivated by a
mechanical switch
Physical Dimensions
– 36.4mm x 42.8mm x 3.3mm
RoHS compliant
*Extended
Temperature
**Power consumption may vary depending on capacities and the flash configuration.
1
© 2011 Apacer Technology Inc.
Rev. 1.0
Compact Flash 5 series
AP-CFxxxxK7XS-XXXXXX
Table of Contents
1. GENERAL DESCRIPTION .................................................................................................... 3
1.1 P
ERFORMANCE
-O
PTIMIZED
C
ONTROLLER
............................................................................................................3
1.1.1 Power Management Unit (PMU)..................................................................................................................3
1.1.2 SRAM Buffer .................................................................................................................................................3
1.1.3 Embedded Flash File System........................................................................................................................3
1.1.4 Error Correction Code (ECC)......................................................................................................................3
2. FUNCTIONAL BLOCK .......................................................................................................... 4
3. PIN ASSIGNMENTS................................................................................................................ 5
4. CAPACITY SPECIFICATION............................................................................................... 7
4.1 P
ERFORMANCE
S
PECIFICATION
.............................................................................................................................7
4.2 E
NVIRONMENTAL
S
PECIFICATIONS
.......................................................................................................................8
5. SOFTWARE INTERFACE .................................................................................................... 9
5.1 CF-ATA C
OMMAND
S
ET
......................................................................................................................................9
6. ELECTRICAL SPECIFICATION ...................................................................................... 11
7. PHYSICAL CHARACTERISTICS ..................................................................................... 12
7.1 D
IMENSION
.........................................................................................................................................................12
7.2 W
RITE
P
ROTECT BY
H
ARDWARE
S
WITCH
...........................................................................................................13
8. PRODUCT ORDERING INFORMATION ........................................................................ 14
8.1 P
RODUCT
C
ODE
D
ESIGNATIONS
.........................................................................................................................14
8.2 V
ALID
C
OMBINATIONS
.......................................................................................................................................15
2
© 2011 Apacer Technology Inc.
Rev. 1.0
Compact Flash 5 series
AP-CFxxxxK7XS-XXXXXX
1. General Description
Apacer’s value-added Industrial CompactFlash Card offers high performance, high reliability and power-
efficient storage. Regarding standard compliance, this CompactFlash Card complies with CompactFlash
specification revision 4.1, supporting transfer modes up to Programmed Input Output (PIO) Mode 6, Multi-
word Direct Memory Access (DMA) Mode 4, Ultra DMA Mode 6, and PCMCIA Ultra DMA Mode 6.
For power efficiency, this industrial CompactFlash card supports some power smart design mechanisms
such as Power-On-Reset, voltage regulator for output voltage adjustments and power failure protection,
as well as the automatic sleep and wake-up feature. In terms of security, it comes with a hardware write
protect switch.
Apacer’s value-added CFC provides complete PCMCIA - ATA functionality and compatibility. Apacer ‘s
CompactFlash technology is designed for applications in Point of Sale (POS) terminals, telecom, IP-STB,
medical instruments, surveillance systems, industrial PCs and handheld applications such as the new
generation of Digital Single Lens Reflex (DSLR) cameras.
1.1 Performance-Optimized Controller
The CompactFlash Card Controller translates standard CF signals into flash media data and control
signals.
1.1.1 Power Management Unit (PMU)
The power management unit (PMU) controls the power consumption of the CompactFlash card controller.
It reduces the power consumption of the CompactFlash Card Controller by putting circuitry not in
operation into sleep mode. The PMU has zero wake-up latency.
1.1.2 SRAM Buffer
The CompactFlash Card Controller performs as an SRAM buffer to optimize the host’s data transfer to
and from the flash media.
1.1.3 Embedded Flash File System
The embedded Flash File System (FFS) is an integral part of the CompactFlash controller. It contains the
MCU firmware to perform the following tasks:
1. Translate host side signals into flash media writes and reads
2. Provide dynamic data flash media wear leveling to spread the flash writes across all unused
memory address space to increase the longevity of flash media
3. Keep track of data file structures
1.1.4 Error Correction Code (ECC)
The CompactFlash card is programmed with BCH Error Detection Code (EDC) and Error Correction Code
(ECC) algorithms capable of correcting up to 24 random bits in 1,024 bytes data.
High performance is achieved through hardware-based error detection and correction.
3
© 2011 Apacer Technology Inc.
Rev. 1.0
Compact Flash 5 series
AP-CFxxxxK7XS-XXXXXX
2. Functional Block
The CompactFlash Card (CFC) includes a controller and flash media, as well as the CompactFlash
standard interface. Figure 2-1 shows the functional block diagram.
Figure 2-1:
Functional block diagram
4
© 2011 Apacer Technology Inc.
Rev. 1.0