The ADR01, ADR02, ADR03, and ADR06 are precision 10.0 V,
5.0 V, 2.5 V, and 3.0 V band gap voltage references featuring high
accuracy, high stability, and low power consumption. The parts
are housed in tiny, 5-lead SC70 and TSOT packages, as well as
in 8-lead SOIC versions. The SOIC versions of the ADR01,
ADR02, and ADR03 are drop-in replacements
1
to the industry-
standard REF01, REF02, and REF03. The small footprint and
wide operating range make the ADR0x references ideally suited
for general-purpose and space-constrained applications.
With an external buffer and a simple resistor network, the
TEMP terminal can be used for temperature sensing and
approximation. A TRIM terminal is provided on the devices for
fine adjustment of the output voltage.
The ADR01, ADR02, ADR03, and ADR06 are compact, low
drift voltage references that provide an extremely stable output
voltage from a wide supply voltage range. They are available in
5-lead SC70 and TSOT packages, and 8-lead SOIC packages
with A, B, and C grade selections. All parts are specified over
the extended industrial (–40°C to +125°C) temperature range.
Table 1. Selection Guide
Part Number
ADR01
ADR02
ADR03
ADR06
Output Voltage
10.0 V
5.0 V
2.5 V
3.0 V
1
ADRO1, ADR02, and ADR03 are component-level compatible with REF01, REF02, and REF03, respectively. No guarantees for system-level compatibility are implied.
SOIC versions of ADR01/ADR02/ADR03 are pin-to-pin compatible with 8-lead SOIC versions of REF01/REF02/REF03, respectively, with the additional temperature
monitoring function.
Rev. L
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
Rev. L | Page 3 of 24
ADR01/ADR02/ADR03/ADR06
ADR02 ELECTRICAL CHARACTERISTICS
V
IN
= 7.0 V to 36.0 V, T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter
OUTPUT VOLTAGE
INITIAL ACCURACY
OUTPUT VOLTAGE
INITIAL ACCURACY
TEMPERATURE COEFFICIENT
Symbol
V
O
V
OERR
V
O
V
OERR
T
CVO
Conditions
A and C grades
A and C grades
B grade
B grade
A grade, 8-lead SOIC, –40°C < T
A
< +125°C
A grade, 5-lead TSOT, –40°C < T
A
< +125°C
A grade, 5-lead SC70, –40°C < T
A
< +125°C
A grade, 5-lead SC70, –55°C < T
A
< +125°C
B grade, 8-lead SOIC, –40°C < T
A
< +125°C
B grade, 5-lead TSOT, –40°C < T
A
< +125°C
B grade, 5-lead SC70, –40°C < T
A
< +125°C
C grade, 8-lead SOIC, –40°C < T
A
< +125°C
2
V
IN
= 7.0 V to 36.0 V, –40°C < T
A
< +125°C
V
IN
= 7.0 V to 36.0 V, –55°C < T
A
< +125°C
I
LOAD
= 0 mA to 10 mA, –40°C < T
A
< +125°C,
V
IN
= 10.0 V
I
LOAD
= 0 mA to 10 mA, –55°C < T
A
< +125°C,
V
IN
= 10.0 V
No load, –40°C < T
A
< +125°C
0.1 Hz to 10.0 Hz
1 kHz
1000 hours
–55°C < T
A
< +125°C
f
IN
= 10 kHz
7
7
40
45
0.65
10
230
4
50
70
80
–75
30
550
1.96
30
40
70
80
1
Min
4.995
Typ
5.000
Max
5.005
5
0.1
5.003
3
0.06
10
25
25
30
3
9
9
40
Unit
V
mV
%
V
mV
%
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
V
ppm/V
ppm/V
ppm/mA
ppm/mA
mA
μV p-p
nV/√Hz
μs
ppm
ppm
ppm
dB
mA
mV
mV/°C
4.997
5.000
3
1
10
DROPOUT VOLTAGE
LINE REGULATION
LOAD REGULATION
V
DO
∆V
O
/∆V
IN
∆V
O
/∆I
LOAD
QUIESCENT CURRENT
VOLTAGE NOISE
VOLTAGE NOISE DENSITY
TURN-ON SETTLING TIME
LONG-TERM STABILITY
1
OUTPUT VOLTAGE HYSTERESIS
RIPPLE REJECTION RATIO
SHORT CIRCUIT TO GND
TEMPERATURE SENSOR
Voltage Output at TEMP Pin
Temperature Sensitivity
1
I
IN
e
N p-p
e
N
t
R
∆V
O
∆V
O_HYS
RRR
I
SC
V
TEMP
TCV
TEMP
The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
Design an automatic flag raising and lowering system that can automatically raise and lower the flag. The mechanical model of the system is shown in Figure 1. The raising and lowering of the flag is d...
Is there such a relay, four groups of signals, one state, 1 and 2 are connected, 3 and 4 are connected, another state. 1 and 4 are connected, 2 and 3 are connected. Although two double-pole double-thr...
I feel like I am about to die, and I can't help but complain. The work is too "idle"!!! All day long, I either arrange workshop work, go out to upgrade the program, or do various chip research, and th...
Abstract In this paper,simply describes some key technololgies used for the Ku/X band converter,and gives practical scheme for the converter and test results. Dey word converter; PLD; frequency multip...
The relationship between EMCP/EMMC/MCP/DRAM/FLASH: In three sentences: MCP is NAND Flash+DRAM; eMMC is NAND Flash+Controller; eMCP is eMMC+DRAM. 1. Memory chip manufacturers: Korean: Samsung, Hynix (H...
1. Introduction
This design was made for participating in an electronic design competition. It effectively solved the problem of the operation and control of an electric car on a seesaw. The s...[Details]
With the advent of increasingly powerful processors, image sensors, memory, and other semiconductor devices, as well as the algorithms that enable them, computer vision can be implemented in a wide...[Details]
Analog engineers have traditionally struggled with complexity when designing power supplies that required multiple outputs, dynamic load sharing, hot-swap, or extensive fault-handling capabilities....[Details]
The reason for the light decay of white LEDs: the decline of phosphor performance
So far, the rapid decline of the luminous performance of white light LEDs, especially low-power white light LE...[Details]
1 Introduction
As an emerging microfabrication technology, micro-electromechanical system (MEMS) technology has begun to be applied in various fields. It can integrate functions such as inform...[Details]
1. With the development of modern industry and the continuous improvement of automation, some medium and large control systems have been greatly facilitated, which not only makes control easier, bu...[Details]
Smart lighting control systems provide high controllability for various buildings and further enhance the level of green energy. They are the core products of energy conservation and digital techn...[Details]
With the continuous consumption of earth's energy and the scarcity of resources, the harm of greenhouse effect to human beings, and the serious pollution of the atmosphere to the earth, the intern...[Details]
Flooded Batteries
This battery developed in Germany can be used to power flashlights, strobe lights and toys as long as it is filled with water. This battery can be stored for 50 years and can...[Details]
The potentiometer is an adjustable electronic component. The main functions of the potentiometer in the circuit are as follows:
1. Used as a voltage divider
A potentiometer is a continuou...[Details]
The traditional display screen using 51 single-chip microcomputer to control LED dot matrix has relatively simple functions. If it is to achieve diversified functions, it often takes a lot of time ...[Details]
With the advocacy and implementation of the government's Safe City Plan, the security market has increasingly higher requirements for the clarity of surveillance images. Imagine that after a case o...[Details]
Introduction
Liquid crystal, as a display device, is widely used in low-power products such as instruments, meters, and electronic equipment with its unique advantages. In the past, the displ...[Details]
FPGAs are used in 81% of electronic systems, including many commercial and defense products, and most FPGAs use BGA packaging. The BGA packaging is characterized by small solder balls and small sol...[Details]
As people's requirements for safety and comfort in the process of driving cars continue to increase, automotive radars are widely used in the car's adaptive cruise system, collision avoidance syste...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
