• Consistent package/pinout offering across all densities
— Simplifies design migration
— Same pinout for 3.3V and 5.0V devices
• Packages
— 44 to 400 Leads in PLCC, CLCC, PQFP, TQFP, CQFP,
BGA, and Fine-Pitch BGA packages
General Description
The Ultra37000™ family of CMOS CPLDs provides a range of
high-density programmable logic solutions with unparalleled
system performance. The Ultra37000 family is designed to
bring the flexibility, ease of use, and performance of the 22V10
to high-density CPLDs. The architecture is based on a number
of logic blocks that are connected by a Programmable Inter-
connect Matrix (PIM). Each logic block features its own prod-
uct term array, product term allocator, and 16 macrocells. The
PIM distributes signals from the logic block outputs and all in-
put pins to the logic block inputs.
All of the Ultra37000 devices are electrically erasable and In-
System Reprogrammable (ISR), which simplifies both design
and manufacturing flows, thereby reducing costs. The ISR fea-
ture provides the ability to reconfigure the devices without hav-
ing design changes cause pinout or timing changes. The
Cypress ISR function is implemented through a JTAG-compli-
ant serial interface. Data is shifted in and out through the TDI
and TDO pins, respectively. Because of the superior routability
and simple timing model of the Ultra37000 devices, ISR allows
users to change existing logic designs while simultaneously
fixing pinout assignments and maintaining system perfor-
mance.
The entire family features JTAG for ISR and boundary scan,
and is compatible with the PCI Local Bus specification, meet-
ing the electrical and timing requirements. The Ultra37000
family features user programmable bus-hold capabilities on all
I/Os.
Ultra37000 5.0V Devices
The Ultra37000 devices operate with a 5V supply and can sup-
port 5V or 3.3V I/O levels. V
CCO
connections provide the ca-
pability of interfacing to either a 5V or 3.3V bus. By connecting
the V
CCO
pins to 5V the user insures 5V TTL levels on the
outputs. If V
CCO
is connected to 3.3V the output levels meet
3.3V JEDEC standard CMOS levels and are 5V tolerant.
These devices require 5V ISR programming.
Ultra37000V 3.3V Devices
Devices operating with a 3.3V supply require 3.3V on all V
CCO
pins, reducing the device’s power consumption. These devices
support 3.3V JEDEC standard CMOS output levels, and are
5V tolerant. These devices allow 3.3V ISR programming.
Notes:
1. The data sheet parameters are final for the following devices: CY37032, CY37032V (with the exception of the 154-MHz speed bin), CY37128, CY37128V (with
the exception of the 154-MHz speed bin), CY37192, CY37192V, CY37256, and CY37256V (with the exception of the 143-MHz speed bin). The data sheet
parameters are considered preliminary for the following devices: CY37064, CY37064V, CY37384, CY37384V, CY37512, and CY37512V.
2. Due to the 5V-tolerant nature of 3.3V device I/Os, the I/Os are not clamped to V
CC
, PCI V
IH
=2V.
Cypress Semiconductor Corporation
•
3901 North First Street
•
San Jose
•
CA 95134
•
408-943-2600
February 9, 2000
Ultra37000™ CPLD Family
[1]
Selection Guide
5.0V Selection Guide
General Information
Device
CY37032
CY37064
CY37128
CY37192
CY37256
CY37384
CY37512
Speed Bins
Device
CY37032
CY37064
CY37128
CY37192
CY37256
CY37384
CY37512
200
X
X
X
X
X
167
154
X
X
143
125
X
X
X
X
X
X
X
X
X
X
X
X
X
X
100
83
66
Macrocells
32
64
128
192
256
384
512
Dedicated
Inputs
5
5
5
5
5
5
5
I/O Pins
32
32/64
64/128
120
128/160/192
160/192
160/192/264
Speed (t
PD
)
6
6
6.5
7.5
7.5
10
10
Speed (f
MAX
)
200
200
167
154
154
125
125
Device-Package Offering & I/O Count
Device
CY37032
CY37064
CY37128
CY37192
CY37256
CY37384
CY37512
44-
Lead
TQFP
37
37
44-
Lead
PLCC
37
37
37
69
69
69
69
69
133
125
133
133
165
165
165
165
197
197
197
269
44-
Lead
CLCC
84-
Lead
PLCC
84-
Lead
CLCC
100-
Lead
TQFP
160-
Lead
TQFP
160-
Lead
CQFP
208-
Lead
PQFP
208-
Lead
CQFP
256-
Lead
BGA
352-
Lead
BGA
2
Ultra37000™ CPLD Family
[1]
3.3V Selection Guide
General Information
Device
CY37032V
CY37064V
CY37128V
CY37192V
CY37256V
CY37384V
CY37512V
Speed Bins
Device
CY37032V
[1]
CY37064V
[1]
CY37128V
[1]
CY37192V
CY37256V
CY37512V
[1]
Macrocells
32
64
128
192
256
384
512
Dedicated
Inputs
5
5
5
5
5
5
5
I/O Pins
32
32/64
64/80/128
120
128/160/192
160/192
160/192/264
Speed (t
PD
)
8.5
8.5
10
12
12
15
15
Speed (f
MAX
)
143
143
125
100
100
83
83
200
167
154
X
X
X
143
X
X
125
100
X
X
83
66
X
X
X
X
X
X
X
X
X
X
X
X
CY37384V
[1]
Shaded areas indicate preliminary speed bins.
Device-Package Offering & I/O Count
Device
CY37032V
CY37064V
CY37128V
CY37192V
CY37256V
CY37384V
CY37512V
44-
Lead
TQFP
44-
Lead
PLCC
44-
Lead
CLCC
48-
Lead
FBGA
84-
Lead
PLCC
84-
Lead
CLCC
100-
Lead
TQFP
100-
Lead
FBGA
160-
Lead
TQFP
160-
Lead
CQFP
208-
Lead
PQFP
208-
Lead
CQFP
256-
Lead
BGA
256-
Lead
FBGA
352-
Lead
BGA
400-
Lead
FBGA
37
37
37
37
37
37
69
69
69
69
69
85
133
125
133
133
165
165
165
165
197
197
197
269
269
197
3
Ultra37000™ CPLD Family
[1]
Architecture Overview of Ultra37000 Family
Programmable Interconnect Matrix
The Programmable Interconnect Matrix (PIM) consists of a
completely global routing matrix for signals from I/O pins and
feedbacks from the logic blocks. The PIM provides extremely
robust interconnection to avoid fitting and density limitations.
The inputs to the PIM consist of all I/O and dedicated input pins
and all macrocell feedbacks from within the logic blocks. The
number of PIM inputs increases with pin count and the number
of logic blocks. The outputs from the PIM are signals routed to
the appropriate logic blocks. Each logic block receives 36 in-
puts from the PIM and their complements, allowing for 32-bit
operations to be implemented in a single pass through the
device. The wide number of inputs to the logic block also im-
proves the routing capacity of the Ultra37000 family.
An important feature of the PIM is its simple timing. The prop-
agation delay through the PIM is accounted for in the timing
specifications for each device. There is no additional delay for
traveling through the PIM. In fact, all inputs travel through the
PIM. As a result, there are no route-dependent timing param-
eters on the Ultra37000 devices. The worst-case PIM delays
are incorporated in all appropriate Ultra37000 specifications.
Routing signals through the PIM is completely invisible to the
user. All routing is accomplished by software—no hand routing
is necessary.
Warp™
and third-party development packages
automatically route designs for the Ultra37000 family in a mat-
ter of minutes. Finally, the rich routing resources of the
Ultra37000 family accommodate last minute logic changes
while maintaining fixed pin assignments.
Logic Block
The logic block is the basic building block of the Ultra37000
architecture. It consists of a product term array, an intelligent
product-term allocator, 16 macrocells, and a number of I/O
cells. The number of I/O cells varies depending on the device
used. Refer to
Figure 1
for the block diagram.
Product Term Array
Each logic block features a 72 x 87 programmable product
term array. This array accepts 36 inputs from the PIM, which
originate from macrocell feedbacks and device pins. Active
LOW and active HIGH versions of each of these inputs are
generated to create the full 72-input field. The 87 product
terms in the array can be created from any of the 72 inputs.
Of the 87 product terms, 80 are for general-purpose use for
the 16 macrocells in the logic block. Four of the remaining
seven product terms in the logic block are output enable (OE)
product terms. Each of the OE product terms controls up to
eight of the 16 macrocells and is selectable on an individual
macrocell basis. In other words, each I/O cell can select be-
tween one of two OE product terms to control the output buffer.
The first two of these four OE product terms are available to
the upper half of the I/O macrocells in a logic block. The other
two OE product terms are available to the lower half of the I/O
macrocells in a logic block.
The next two product terms in each logic block are dedicated
asynchronous set and asynchronous reset product terms. The
final product term is the product term clock. The set, reset, OE
and product term clock have polarity control to realize OR
functions in a single pass through the array.
3
0−16
PRODUCT
TERMS
2
I/O
CELL
0
2
MACRO-
CELL
0
MACRO-
CELL
1
7
0−16
PRODUCT
TERMS
to cells
2, 4, 6 8, 10, 12
FROM
PIM
36
72 x 87
PRODUCT TERM
ARRAY
80
PRODUCT
TERM
ALLOCATOR
0−16
PRODUCT
TERMS
MACRO-
CELL
14
MACRO-
CELL
15
I/O
CELL
14
0−16
TO
PIM
PRODUCT
TERMS
16
8
Figure 1. Logic Block with 50% Buried Macrocells
4
Ultra37000™ CPLD Family
[1]
Low-Power Option
Each logic block can operate in high-speed mode for critical
path performance, or in low-power mode for power conserva-
tion. The logic block mode is set by the user on a logic block
by logic block basis.
Product Term Allocator
Through the product term allocator, software automatically dis-
tributes product terms among the 16 macrocells in the logic
block as needed. A total of 80 product terms are available from
the local product term array. The product term allocator pro-
vides two important capabilities without affecting performance:
product term steering and product term sharing.
Product Term Steering
Product term steering is the process of assigning product
terms to macrocells as needed. For example, if one macrocell
requires ten product terms while another needs just three, the
product term allocator will “steer” ten product terms to one
macrocell and three to the other. On Ultra37000 devices, prod-
uct terms are steered on an individual basis. Any number be-
tween 0 and 16 product terms can be steered to any macrocell.
Note that 0 product terms is useful in cases where a particular
macrocell is unused or used as an input register.
Product Term Sharing
Product term sharing is the process of using the same product
term among multiple macrocells. For example, if more than
one output has one or more product terms in its equation that
are common to other outputs, those product terms are only
programmed once. The Ultra37000 product term allocator al-
lows sharing across groups of four output macrocells in a vari-
able fashion. The software automatically takes advantage of
this capability—the user does not have to intervene.
Note that neither product term sharing nor product term steer-
ing have any effect on the speed of the product. All worst-case
steering and sharing configurations have been incorporated in
the timing specifications for the Ultra37000 devices.
Ultra37000 Macrocell
Within each logic block there are 16 macrocells. Macrocells
can either be I/O Macrocells, which include an I/O Cell which
is associated with an I/O pin, or buried Macrocells, which do
not connect to an I/O. The combination of I/O Macrocells and
buried Macrocells varies from device to device.
Buried Macrocell
Figure 2
displays the architecture of buried macrocells. The
buried macrocell features a register that can be configured as
combinatorial, a D flip-flop, a T flip-flop, or a level-triggered
latch.
The register can be asynchronously set or asynchronously re-
set at the logic block level with the separate set and reset prod-
uct terms. Each of these product terms features programma-
ble polarity. This allows the registers to be set or reset based
on an AND expression or an OR expression.
Clocking of the register is very flexible. Four global synchro-
nous clocks and a product term clock are available to clock the
register. Furthermore, each clock features programmable po-
larity so that registers can be triggered on falling as well as
rising edges (see the Clocking section). Clock polarity is cho-
sen at the logic block level.
The buried macrocell also supports input register capability.
The buried macrocell can be configured to act as an input reg-
ister (D-type or latch) whose input comes from the I/O pin as-
sociated with the neighboring macrocell. The output of all bur-
ied macrocells is sent directly to the PIM regardless of its
configuration.
I/O Macrocell
Figure 2
illustrates the architecture of the I/O macrocell. The
I/O macrocell supports the same functions as the buried mac-
rocell with the addition of I/O capability. At the output of the
macrocell, a polarity control mux is available to select active
LOW or active HIGH signals. This has the added advantage of
allowing significant logic reduction to occur in many applica-
tions.
The Ultra37000 macrocell features a feedback path to the PIM
separate from the I/O pin input path. This means that if the
macrocell is buried (fed back internally only), the associated
I/O pin can still be used as an input.
Bus Hold Capabilities on all I/Os
Bus-hold, which is an improved version of the popular internal
pull-up resistor, is a weak latch connected to the pin that does
not degrade the device’s performance. As a latch, bus-hold
maintains the last state of a pin when the pin is placed in a
high-impedance state, thus reducing system noise in bus-in-
Industry is to quickly produce a large number of goods needed by humans, forming a set of specialized production models, and effectively improving production efficiency. What developments has the worl...
This paper briefly introduces the MCGS configuration software and its application in the "Xinjiang Tahe Oilfield Water Supply Project Monitoring System", and explains the basic process of using MCGS c...
EEWorld "Search Device" applet 1.1 updated, adding a new "note" function to record device thoughts; search function further optimized to understand you better~Instant query of data sheets for tens of ...
The following error occurs when compiling with ADS1.2. I don't know what the reason is. I don't know if anyone in the forum has encountered this before. Please help me. Error: L6218E: Undefined symbol...
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
1. Introduction
RFID (radio frequency identification) is a non-contact automatic identification technology that emerged in the 1990s. It uses the characteristics of radio frequency signal prop...[Details]
At present, the traffic congestion in cities is quite serious. According to relevant news reports: In China, the traffic congestion has expanded from megacities such as Beijing, Shanghai, and Guang...[Details]
Electronic systems are located at different points on the automotive power bus and therefore often need to operate under very stringent power requirements. These include load dump, cold crank, very lo...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
1. Introduction
Testing the temperature of steel billets before rolling is an important measure to ensure the quality of steel. Traditional manual testing is difficult to ensure product qu...[Details]
In recent years, with the rapid development of the information industry, dot matrix LED display screens have been widely used in various advertising and information display systems such as the fina...[Details]
Capacitance Measurement
Used to verify that capacitors meet the manufacturer's specifications. For quality control, a group of capacitors may be placed in an environmental chamber and the cap...[Details]
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, this proportion may be as high as 30-40% as more safety electronics, fuel consumption and ...[Details]
Introduction
Automakers are working to reduce vehicle weight to reduce CO2 emissions and improve fuel efficiency. Designers are therefore seeking new technologies and design techniques that can...[Details]
LED guardrail lights use fluorescent tubes or LEDs as light sources and continuous guardrails as carriers to form an approximately linear guardrail light strip. This article mainly introduces...[Details]
Introduction
In industrial control, speed measurement is often required. Generally, a contact tachometer is used. This tachometer must be placed against the center of the shaft to measure. It...[Details]
The DisplayPort interface standard is approved by the Video Electronics Standards Association (VESA) to provide an open, scalable standard for the entire industry. The development of DisplayPort ca...[Details]
With the continuous advancement of various technologies in the field of measurement and control, the baseband subsystem of general measurement and control equipment has entered the fourth generation o...[Details]
The invention of the steam engine ushered in the first conversion of internal energy and mechanical energy for mankind, and the birth of the internal combustion engine at the end of the 19th centur...[Details]
Robotics Development
京公网安备 11010802033920号
EEWORLD
