UPD30102S1-54-3C datasheet, PDF

Datasheet> All Categories > UPD30102S1-54-3C

Preview

UPD30102S1-54-3C: Description64/32-bit Microprocessor; File Size2MB，701 Pages; ManufacturerNEC ( Renesas ); Websitehttps://www2.renesas.cn/zh-cn/

Download Datasheet Compare View All

UPD30102S1-54-3C Overview

64/32-bit Microprocessor

Preview

Download Datasheet

View All

Preliminary User’s Manual

4102™

64/32-bit Microprocessor

PD30102

Document No. U12739EJ2V0UM00 (2nd edition)

Date Published January 1998 N CP(K)

1997

Printed in Japan

NOTES FOR CMOS DEVICES

PRECAUTION AGAINST ESD FOR SEMICONDUCTORS

Note:

Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and

ultimately degrade the device operation. Steps must be taken to stop generation of static electricity

as much as possible, and quickly dissipate it once, when it has occurred. Environmental control

must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using

insulators that easily build static electricity. Semiconductor devices must be stored and transported

in an anti-static container, static shielding bag or conductive material. All test and measurement

tools including work bench and floor should be grounded. The operator should be grounded using

wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need

to be taken for PW boards with semiconductor devices on it.

HANDLING OF UNUSED INPUT PINS FOR CMOS

Note:

No connection for CMOS device inputs can be cause of malfunction. If no connection is provided

to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence

causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels

of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused

pin should be connected to V

or GND with a resistor, if it is considered to have a possibility of

being an output pin. All handling related to the unused pins must be judged device by device and

related specifications governing the devices.

STATUS BEFORE INITIALIZATION OF MOS DEVICES

Note:

Power-on does not necessarily define initial status of MOS device. Production process of MOS

does not define the initial operation status of the device. Immediately after the power source is

turned ON, the devices with reset function have not yet been initialized. Hence, power-on does

not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the

reset signal is received. Reset operation must be executed immediately after power-on for devices

having reset function.

3000, V

4000, V

4100, V

4101, V

4102, V

4200, V

4400, and V

Series are trademarks of NEC

Corporation.

MIPS is a trademark of MIPS Technologies, Inc.

iAPX is a trademark of Intel Corp.

DEC VAX is a trademark of Digital Equipment Corp.

UNIX is a registered trademark in the United States and other countries, licensed exclusively through

X/Open Company, Ltd.

Exporting this product or equipment that include this product may require a governmental license from

the U.S.A. for some countries because this product utilizes technologies limited by the export control

regulations of the U.S.A.

The information in this document is subject to change without notice.

No part of this document may be copied or reproduced in any form or by any means without the prior written

consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in

this document.

NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual

property rights of third parties by or arising from use of a device described herein or any other liability arising

from use of such device. No license, either express, implied or otherwise, is granted under any patents,

copyrights or other intellectual property rights of NEC Corporation or others.

While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,

the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or

property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety

measures in its design, such as redundancy, fire-containment, and anti-failure features.

NEC devices are classified into the following three quality grades:

"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on

a customer designated "quality assurance program" for a specific application. The recommended applications

of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each

device before using it in a particular application.

Standard: Computers, office equipment, communications equipment, test and measurement equipment,

audio and visual equipment, home electronic appliances, machine tools, personal electronic

equipment and industrial robots

Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster

systems, anti-crime systems, safety equipment and medical equipment (not specifically designed

for life support)

Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems or medical equipment for life support, etc.

The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.

If customers intend to use NEC devices for applications other than those specified for Standard quality grade,

they should contact an NEC sales representative in advance.

Anti-radioactive design is not implemented in this product.

M7 96. 5

UPD30102S1-54-3C Related Products

	UPD30102S1-54-3C	UPD30102	UPD30102GM-66-8EV	VR4102	UPD30102GM-54-8EV	UPD30102S1-66-3C
Description	64/32-bit Microprocessor	64/32-bit Microprocessor	64/32-bit Microprocessor	64/32-bit Microprocessor	64/32-bit Microprocessor	64/32-bit Microprocessor

Recommended Resources

One of three signal switches, multi-way switch CD4027 multi-way switch

Bipolar regulated power supply circuit with adjustable output voltage

Capacitance meter circuit diagram design based on LM2917

IBM-PC/XT power supply circuit diagram 01

Circuit example circuit diagram (10A, 15V)

25mA floating current source circuit diagram

Dressing Problems for Electronic Engineers: A person's attire reflects his standardization and professionalism. For example, salespeople wear suits, service personnel wear special clothes, and civil servants wear special uniforms. Engineers oft...; KG5 Talking about work

Friends who have written about S3C2440 reading and writing AT24C08, please take a look at this question: Recently, I wanted to write a Linux-based AT24C08 driver, so I wrote a bare metal driver first. The main purpose is to complete the read and write operations of S3C2440 to AT24C08 through the IIC bus....; wangwennan Embedded System

IQ 180 test questions: [size=4] It is said that this is the "FBI IQ test: answer in 20 minutes to get an IQ of up to 180". [/size] [size=4] [/size] [size=4] *I don't know if it's true or not, but the question is indeed very...; xuyiyi Talking

Show your design plan + "Personalized Customization" digital photo frame: [i=s]This post was last edited by ddllxxrr on 2014-2-19 19:56[/i] When you have nothing to do, put your favorite photos into a digital photo frame. And this photo frame is a development board, which i...; ddllxxrr stm32/stm8

I want to control the opening and closing of multiple MOS tubes, but I don't know how to give the system a common ground.: This is my circuit diagram. I originally wanted to make a resistance balancing circuit for series batteries. The left side is the battery input terminal, with 3 batteries in series, and the right side...; ACharlie stm32/stm8

Can PWM control chip be used for isolated charging?: I want to make an isolated charger recently. The input of the transmitter is ~220V. The receiver mainly charges a 4.8V NiMH battery pack with a capacity of 800mAH. In order to shorten the charging tim...; huang0909 Power technology

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components