B66482G0000X195 datasheet, PDF

Datasheet> All Categories > B66482G0000X195

Preview

B66482G0000X195: DescriptionFerrites and accessories; File Size347KB，9 Pages; ManufacturerEPCOS (TDK)

Download Datasheet Compare View All

B66482G0000X195 Overview

Ferrites and accessories

Preview

Download Datasheet

View All

Ferrites and accessories

ER 23/5/13 with I 23/2/13

Planar cores

Series/Type:

Date:

B66482G, B66482K

May 2017



EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the

information contained therein without EPCOS’ prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Ferrites and accessories

Cautions and warnings

Mechanical stress and mounting

Ferrite cores have to meet mechanical requirements during assembling and for a growing number

of applications. Since ferrites are ceramic materials one has to be aware of the special behavior

under mechanical load.

As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast tempera-

ture changing or tensile load. Especially high cooling rates under ultrasonic cleaning and high static

or cyclic loads can cause cracks or failure of the ferrite cores.

For detailed information see data book, chapter

“General - Definitions, 8.1”.

Effects of core combination on A

value

Stresses in the core affect not only the mechanical but also the magnetic properties. It is apparent

that the initial permeability is dependent on the stress state of the core. The higher the stresses are

in the core, the lower is the value for the initial permeability. Thus the embedding medium should

have the greatest possible elasticity.

For detailed information see data book, chapter

“General - Definitions, 8.1”.

Heating up

Ferrites can run hot during operation at higher flux densities and higher frequencies.

NiZn-materials

The magnetic properties of NiZn-materials can change irreversible in high magnetic fields.

Ferrite Accessories

EPCOS ferrite accessories have been designed and evaluated only in combination with EPCOS

ferrite cores. EPCOS explicitly points out that EPCOS ferrite accessories or EPCOS ferrite cores

may not be compatible with those of other manufacturers. Any such combination requires prior te-

sting by the customer and will be at the customer‘s own risk.

EPCOS assumes no warranty or reliability for the combination of EPCOS ferrite accessories with

cores and other accessories from any other manufacturer.

Processing remarks

The start of the winding process should be soft. Else the flanges may be destroyed.

– Too strong winding forces may blast the flanges or squeeze the tube that the cores can not be

mounted any more.

– Too long soldering time at high temperature (>300 °C) may effect coplanarity or pin arrange-

ment.

– Not following the processing notes for soldering of the J-leg terminals may cause solderability

problems at the transformer because of pollution with Sn oxyde of the tin bath or burned insula-

tion of the wire. For detailed information see chapter

“Processing notes”,

section 2.2.

– The dimensions of the hole arrangement have fixed values and should be understood as

a recommendation for drilling the printed circuit board. For dimensioning the pins, the group

of holes can only be seen under certain conditions, as they fit into the given hole arrangement.

To avoid problems when mounting the transformer, the manufacturing tolerances for positioning

the customers’ drilling process must be considered by increasing the hole diameter.

Please read

Cautions and warnings

and

Important notes

at the end of this document.

5/17

B66482G0000X195 Related Products

	B66482G0000X195	B66482G0000X149_13	B66482K0000X149	B66482K0000X187	B66482K0000X192	B66482G0000X192	B66482P
Description	Ferrites and accessories	Ferrites and accessories	Ferrites and accessories	Ferrites and accessories	Ferrites and accessories	Ferrites and accessories	Ferrites and accessories

Recommended Resources

Water full alarm circuit

Power circuit with smoothing filter capacitor

Program-controlled automobile circuit

Electronic ballast circuit using TDA4918 to drive halogen lamp

Regulated voltage boost converter circuit diagram

High-speed monostable circuit (2)

Altium Designer BGA routing, how to fan out?: Altium Designer BGA routing, how to fan out? Is there any reference document? Can anyone give me some advice?...; wzp2007 PCB Design

Is there a comparator inside the MSP-EXP430G2231 Launchpad?: As the title says, I personally don’t feel...; ml@mhl Microcontroller MCU

ADS1.2 About the main function file inclusion problem: I would like to ask you a question:Anyone who has used ADS1.2 knows that after adding source files to a new project, when you open the source file again, there will be buttons such as h {} M on the to...; qbknight Embedded System

555 circuit usage: 555 circuit usage...; Fredniu Embedded System

Volt-second balance of magnetic components in various power topologies (graphics and text): [size=3][backcolor=yellow][b]Opening[/b][/backcolor][/size] [size=3]This is a courseware I made before. All the pictures are drawn in SCH. Please forgive me if the drawing is not good. It is OK as lon...; 木犯001号 Power technology

When debugging the program, I found that I could not jump out of a program related to the crystal oscillator.: When debugging the program, the program stops at this section. I don’t know what’s going on. The microcontroller model is PIC24 series, the external crystal oscillator is 8M, and the starting capacito...; emily_1105 Microchip MCU

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components