1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all
frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modi cation.
5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Europe:
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
Fax: +49 (0) 3328.4784.30
Asia:
Vectron International
1F-2F, No 8 Workshop, No 308 Fenju Road
WaiGaoQiao Free Trade Zone
Pudong, Shanghai, China 200131
Tel: 86.21.5048.0777
Fax: 86.21.5048.1881
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
:Sweat: I have learned MSP by myself for a few days. I plan to use P2.1 to output square waves, and then use the peripheral module function of P1.1 to capture the rising edge of the source CCI0A to en...
The project requires a company that can make SIC simulation models. The impedance, on-delay, parasitic capacitance and other parameters must be adjustable. Can you recommend a capable company?...
As shown in the figure, this is my method to eliminate crossover distortion. Point A is a -5v~+5v sine wave, but the waveform at point B is not a symmetrical sine wave, but is offset downward by a cer...
[i=s] This post was last edited by qwqwqw2088 on 2018-5-24 10:10 Edit[/i] [size=4] There are many types of batteries, but the models that are currently mass-produced and focused on research and develo...
I'm developing a 28335 chip recently. Which expert is working on this? Is there anyone who uses an external bus? Can you provide two ready-made examples for me to play with?...
I was very depressed and upset. I was afraid of making mistakes, but something went wrong.
After searching a lot of fuse setting methods, I still locked TAMEGA88. TAMEGA88 uses internal clock by defau...