: .......................................................................16 detents with 2.5 Ncm (+/- 30%) or no detents
Outer shaft
1
:......................................................................32, 16 or no detents
For 32 detents: 0.5, 1.0 or 2.0 Ncm (+/- 30%)
For 16 detents: 1.5 or 2.5 Ncm (+/- 30%)
Rotational life:
2
..................................................................1,000,000 revolutions min. with 0.5, 1.0 or 1.5 Ncm switching torque or with no detents
500,000 revolutions min. with 2.0 Ncm switching torque
300,000 revolutions min. with 2.5 Ncm switching torque
Residual switching torque (end of life): ................................90% typ.
Shaft strength: ...................................................................100 N min. push, 100 N min. pull, 50 Ncm min. bending
Fastening torque of nut: .....................................................100 Ncm max.
Shock: ...............................................................................100 G max. (MIL-STD-202G, method 213B, condition C)
Flammability:.....................................................................UL94-V0 (IP65/IP68: O-rings and non-threaded bushing gasket are UL94-HB)
Packaging Sizes
Tray: .................................................................................20 pcs. (nuts are supplied and packed separately)
Additional Data for Push Button Switch
Mechanical Data
Push button actuation force (new condition): ........................6 N (+/- 30%)
Push button switch travel: ...................................................0.5 (+/- 0.2) mm
Push button switch life:
2
......................................................200,000 actuations min.
Residual push button actuation force (end of life): ................90% typ.
Electrical Data
Contact bouncing time: ......................................................2 ms max.
Dielectric withstanding voltage to housing/shaft:..................500 VDC during 60 seconds (MIL-STD-202G, method 301)
# v853 YOLO v5 quantization installation yoloV5 When quantizing the yolov5 model, you need to use onnx-simplifier to convert the model. The converted model may not be usable and needs to be verified. ...
In the rheological analyzer, the detection of temperature, pressure, torque and speed is involved. The temperature and pressure both require ADC for data collection, while the speed detection requires...
Live Topic
TI Matter solutions enable smart home innovation
Live broadcast time
Today morning 10:00-11:00
Go to live broadcast
Introduction
Recently, the CSA Connectivity Standards Alliance and its me...
I ordered two development boards on element11, one VL53L5CX module and one X-NUCLEO-IHM07M1. The prices are shown in the figure below, but the price is subject to 13% tax. However, the price is still ...
Teachers, I have two questions.
In the circuit below, C1 is charged to 15V through resistor R10, but the discharge paths are closed. So how does C1 discharge?
in addition,
The power lines are connecte...
In the war without gunpowder between China and the United States,
ZTE
has become a new victim. The seven-year chip ban by the United States has pushed this communications giant to a life-or...[Details]
The trade war between China and the United States has become the focus. The United States has begun to play the ban card against Chinese technology companies. The ZTE incident shows that if the ban...[Details]
Recently, the US embargo on ZTE has attracted much attention. Let's take a look at the relevant content with the automotive electronics editor. On April 16, local time, the U.S. Department of Co...[Details]
Development Background: 1. Main chip - STM32F207VCT6; 2. TCP/IP protocol stack - LWIP, transplanted based on ST routines; 3. Operating system - none (bare metal); Anomalies: 1. Power on the device wi...[Details]
Recently, the "Smart Photovoltaic Industry Development Action Plan (2018-2020)" jointly issued by six departments has put this concept on the forefront. Photovoltaic smart solutions will become the ne...[Details]
China Energy Storage Network News:
The State Grid Corporation of China, this elephant, is planning to turn around and enter the emerging power service market.
The rallying cry for the tr...[Details]
With the implementation of the first version of the NR sub-6GHz draft of 3GPP in December 2017, and the subsequent Phase 2 drafts, semiconductor manufacturers and terminal manufacturers began to ...[Details]
Since China began to try to produce panels independently in 1998, in 2018, China's panel industry has gradually upgraded from a marginal industry to the largest production scale. Especially in the ...[Details]
I rewrote the main part of this program. The program uses the watchdog as a normal timer and scans the digital tubes in the watchdog interrupt. In addition, I added a display buffer. If you want to d...[Details]
STM32 uses FSMC to read and write CPLD programs. CPLD is hung on the address line and data line of STM32. CPLD is regarded as an off-chip RAM for reading and writing. On the board I made, CPLD is hun...[Details]
Kevin Jensen ams Semiconductor
Sensors
and lighting expert. Let's learn more about the relevant content with the network communication editor.
Everything is becoming "smart" these ...[Details]
In recent years, in addition to Huawei Kirin
chips
in the mobile phone industry
, Xiaomi's own processor Pengpai S1, AI
chip
start-ups such as Cambrian, Horizon, and Deephi Technolo...[Details]
The frequency calculation formula of the PWM wave generated by the output comparison mode of the timer is: 72M/((2*(arr+1))*(psc+1) ) For example, if you set: PWM_Init(1000-1,72-1); (PWM_Init(arr,psc...[Details]
Title: Use the table lookup method to convert a hexadecimal number into ASCII code. The input parameter is placed in the internal RAM 50H, and the output parameter is in R0. Requirements: Complete th...[Details]
Circuit: Using AT89S52 single chip microcomputer. P3.0 to P3.3 are connected to four external buttons. P3.4 to P3.7 are the bit selection ports for controlling the four digital tubes, and P1 is the s...[Details]