SCHOTTKY DIODE MODULE DETECTORS
High sensitivity and superior electrical and environmental reliability characterize
these module detectors. They are hermetically sealed and contain internal RF
matching, DC return, and RF bypass capacitor. In addition, the video port can
be protected from static or transient voltages. This feature prevents damage
due to handling (usually static) or system video transients. Models may be
chosen for broadband RF performance or for optimized narrow bands. They
may be used in microstrip or stripline applications for power monitoring,
broadband ECM receivers, radar equipment, beacon or multi-channel receivers.
Each detector model contains:
•
Input Impedance Matching
•
DC return
•
RF bypass capacitor
•
Detector diode
•
Video protection diode
Features:
•
Static Protection
•
High Sensitivity
•
Small Size
Applications:
•
Transmitter Monitoring
•
Radar Equipment
•
Missile Guidance Systems
•
Input to Low-Noise Amplifiers
•
Broadband Or Narrowband ECM Receivers
•
Power and Signal Monitors
•
Doppler Radar and Beacon Receivers
•
Matched units available for Multi-channel Receivers, Amplitude Comparator Systems and Discriminators
Minimum
Sensitivity
K
(mV/mW)
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
1800
1800
1800
2000
Frequency
Range
(GHz)
0.1 - 1
0.5 - 2
1-2
0.5 - 4
1-4
2-4
1-8
2-8
4-8
2 - 12
8 - 12
1 - 18
2 - 18
8 - 18
12 - 18
Part (1)
Number
ACSM2035N
ACSM2001N
ACSM2066N
ACSM2108N
ACSM2038N
ACSM2002N
ACSM2075N
ACSM2014N
ACSM2003N
ACSM2007N
ACSM2004N
ACSM2047N
ACSM2006N
ACSM2015N
ACSM2005N
Flatness
vs
Frequency
(+/-dB)
0.25
0.4
0.2
0.4
0.4
0.4
0.5
0.5
0.4
0.9
0.65
1.0
1.0
0.7
0.6
Typical (2)
TSS
(dBm)
-52
-53
-53
-53
-53
-53
-53
-53
-53
-52
-52
-51
-51
-52
-52
Nominal (3)
Video
Capacitance
(pF)
270
75
20
20
20
20
20
20
20
20
12
20
12
12
12
Standard
Case
Styles
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
Optional
Case
Styles
M34, M35, M47
M34, M35, M47
M34,M35,M47,M50,M51
M43, M50, M51
M50, M51
M50, M51
—
—
M50, M51
—
—
—
—
—
—
NOTES:
1) Standard output polarity is negative. If negative output is required, substitute “P” for “N” in part number.
2) Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with respect to noise. It is measured using a video amplifier with
a 2MHz bandwidth and a 3dB noise figure.
3) Video capacitance is used for RF bypass. This value can be changed if required for video response time or other considerations.
Contact the factory if value other than those shown are needed.
4) Video protection is available on most models. This feature helps to prevent damage to the detector diode from incidents occurring at the
video port. Transient electromagnetic spikes, static contact, or voltage surges can easily damage a detector diode. A video protection
diode will clamp the voltage at a value less than the detector breakdown voltage. NOTE: Inclusion of this protection will cause the
output voltage to compress and clamp. This occurs at about +10dBm input to the detector. If operation above +10dBm is required then
the output protection should be modified or excluded. Adding a suffix “X” at the end of the model number will exclude the video
protection feature. Contact the factory for assistance.
5) Zero bias schottky versions are available for most of listed biased schottky models with only minor differences in specifications.
a. The zero bias schottky has an impedance of several thousand ohms.
b. Zero bias schottky detectors exhibit less sensitive TSS due to the high diode impedance (typically a 3dB reduction).
c. The temperature performance of the zero bias schottky is poor when operating at low input power levels. This difference
becomes small at high levels (above 0dBm input power). The part number of zero bias versions includes a “Z” following the
polarity indicator.
611 Industrial Way West, Eatontown, NJ 07724
tel: 732-460-0212 fax: 732-460-0214
sales@advanced-control.com
www.advanced-control.com
ENVIRONMENTAL SPECIFICATIONS:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp: -65°C to +125°C
Storage Temp: -65°C to +150°C
Humidity: MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Vibration : MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Temperature Cycle: MIL-STD-202F, M105C, Cond D
Maximum Input Power: +20dBm
0.120
0.080
SCREENING :
Standard Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
Optional High-Rel Screening (Ref MIL-PRF-38534):
Internal Visual per MIL-STD-883, Method 2017
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
0.330
0.250
0.120
Ø0.012
TYP.
INPUT
C
L
0.246
±.003
OUTPUT
0.129
0.058
TYP.
CASE STYLE M12
0.411±.002
0.280±.005
0.079±.002
0.079±.002
Ø0.058±.003 THRU
(2) PLCS.
0.400 MAX.
0.210
0.050
(3) PLCS.
1
0.252±.003
COLORED DOT
INPUT
COLORED DOT
INPUT
Ø0.096±.003
THRU
0.080
±.001
0.135
±.010
(2) PLCS.
0.180
SQ. MAX.
8
0.015±.003
TYP.
0.161±.001
0.080±.001
PIN
1
2
3
4
5
6
7
8
FUNCTION
N/C
RF INPUT
N/C
GROUND
N/C
OUTPUT
N/C
GROUND
0.160
2
7
0.150
3
4
6
5
0.012 MAX.
(TO FLAT)
0.004 X 0.020
MIN. (2) PLCS.
0.135±.010
(2) PLCS.
0.020 MAX.
(TO FLAT)
0.004 X 0.020
MIN. (2) PLCS.
0.080
MAX.
0.205±.003
0.062±.002
0.126±.004
0.205±.003
0.126
±.004
0.062±.002
0.005±.002
CASE STYLE M47
CASE STYLE M50
Ø0.360±.002
Ø0.300±.002
CASE STYLE M51
Ø0.500±.002
Ø0.450±.002
0.160
0.200
0.120
0.080
0.430
0.052±0.004
(2) PLCS.
0.250
0.120
0.185±.015
0.185±.015
Ø0.015
TYP.
Ø0.187
±.003
0.1015
-.0000
+.0015
C
L
0.018±.002
(4) PLCS.
GND
RF IN
0.018±.002
(4) PLCS.
GND
RF IN
0.094
0.200±.005
TYP.
0.034±.005
VIDEO
OUT
N/C
45°±3°
TYP.
0.031±.003
0.300±.005
0.050
MAX.
VIDEO OUT
N/C
45°±3°
TYP.
0.031±.003
CASE STYLE M43
Part Number Ordering Information:
CASE STYLE M34
CASE STYLE M35
Example: ACSM2015NZM51X20
ACSM2015: Schottky Module Detector, 8 - 18GHz
N: Negative output polarity
Z: Zero bias version (omit for biased version)
M51: Package type
X: No video protection (omit for inclusion of video protection)
20: 20pF custom output capacitance (omit for standard value)
SM-0205
611 Industrial Way West, Eatontown, NJ 07724
tel: 732-460-0212 fax: 732-460-0214
sales@advanced-control.com
www.advanced-control.com
京公网安备 11010802033920号
EEWORLD
