FCI offers a broad and a complete range of interconnection
systems conforming to DIN 41612 and IEC 603-2 specifications.
DIN 41612 connector systems are the most popular backplane
interconnect systems due to the widespread standard adoption,
easy availability, cost-effectiveness and durability.
The product design for Board-to-Board and I/O solutions
involve two popular mating combination; Standard Mount and
Reverse Mount.
These connectors are available in up to three rows and 96
positions with Solder, Press-fit and Pin-in Paste terminations.
FCI offers three standard performance class options as follows:
DIN class I (500 operations); DIN class II (400 operations); DIN
class III (50 operations).
Primary market segments include Industrial, Telecom and
Data.
FEATURES
• 2.54mm pitch
• Modular system
• Selective loading pattern for contacts
• FMLB/LMEB contacts
• Wide range of accessories (board-locks, latches, shrouds,
hoods, keys)
• Rear plug up variants in press-fit applications
BENEFITS
• Adequate spacing for routing PCB traces
• Standardized and cost-effective solutions
• Improve creepage distance, allow custom loading
• Critical grounding option
• Enhances the connector suitability and flexibility
• Extended mating applications via shrouds on the rear side
of the PCB
DIN 41612 SIGNAL
HEADERS & RECEPTACLES
TECHNICAL INFORMATION
MATERIALS
• Insulator: Polyester Thermoplastic
• Housings can withstand exposure to lead free wave
soldering temperature of 260ºC to 265ºC when used along
with high temperature adhesive or protective metallic
device for right angle connectors.
• Contact: Copper Alloy (Male & female contact)
• Plating: Lead-free version
• Male & Female contacts (DIN 41612 compliant)
•
Active
•
ENVIRONMENTAL
• Temperature Range: -55ºC to +125ºC
• Damp Heat
•
•
•
Steady state 56 days: Class 1
Steady state 21 days: Class 2
Not applicable: Class 3
APPROVALS AND CERTIFICATIONS
• UL/CSA in progress
contact areas selectively plated
PACKAGING
• Tray
• Tube
• Carton
Gold over Nickel or GXT
TM
over Nickel on mating surface
over Nickel on solder termination
•
Tin
ELECTRICAL PERFORMANCE
• Current Rating at 20ºC: 1.5A
• Maximum Current: 2A
• Contact Resistance:
≤
20mΩ
• Insulation Resistance:
≥
10
6
MΩ
• Test Voltage (rms): 1000V
• Creepage and Clearance Distance:
≥
1.2mm
• Wiping/Plug-in Direction:
≥
1.8mm
TARGET MARKET/ APPLICATIONS
• Industrial
•
•
•
Medical
Lighting
Process Control
Instrumentation
electronics
Energy transmission/distribution control
Switching/Routing
Enterprise
- wired/wireless
•
Transportation
•
•
Vehicle
•
MECHANICAL PERFORMANCE
• Mating Insertion Force per Contact:
≤
0.94N
• Mating Extraction Force per Contact:
≥
0.15N
• Contact Retention in Insulator:
≥
20N
• Vibration:
≤
1µs
≤
40mΩ
• Shock:
≤
1µs
≤
40mΩ
• Telecom
•
•
•
Transmission
•
Access
• Data
•
•
•
Servers
Personal Computing
Peripheral devices
Home entertainment
White goods
Phones
SPECIFICATIONS
• DIN 41612
• IEC 603-2
• Consumer
•
•
•
For more information,
please contact: Communications@fci.com
or visit us at
www.fci.com
Disclaimer
Please note that the above information is subject to change without notice.
DIN 41612 SIGNAL
HEADERS & RECEPTACLES
PART NUMBERS
Style
Connector
Configuration
2 row / 64 pos.
Right Angle Header
3 row / 96 pos.
C
2 row / 64 pos.
Straight Receptacle
3 row / 96 pos.
2 row / 32 pos.
3 row / 48 pos.
2 row / 32 pos.
Straight Receptacle
3 row / 48 pos.
1 row / 32 pos.
2 row / 64 pos.
1 row / 32 pos.
2 row / 64 pos.
2 row / 32 pos.
a, b, c
a&c
a, b, c
a&c
a, b, c
a only
a&b
a only
a&b
a&b
Solder-to-board
Solder-to-board
Press-fit
Solder-to-board
Press-fit
Solder-to-board
Press-fit
Solder-to-board
Press-fit
Solder-to-board
Solder-to-board
Press-fit
Solder-to-board
Solder-to-board
Solder-to-board
Solder-to-board
Press-fit
Solder-to-board
a&c
a, b, c
Rows Loaded
a&c
Termination
Solder-to-board
Press-fit
Solder-to-board
Press-fit
Solder-to-board
Press-fit
Solder-to-board
Press-fit
Part number
860946471137*5ELF
860946471947*5E1LF
860939671137*5ELF
860939671947*5E1LF
860946481147*5V1LF
860946481947*5E3LF
860939681147*5V1LF
860939681947*5E3LF
860943273137*5ELF
860934873137*5ELF
860943283147*5V1LF
860934883147*5V1LF
860934883947*5E3LF
860913251137*5ELF
860926451137*5ELF
860913261147*5V1LF
860926461147*5V1LF
860923253137*5ELF
860923263147*5E1LF
860946478147*5ELF
860946478947*5E1LF
860939678147*5ELF
860939678947*5E1LF
860946488137*5V1LF
860946488947*5E3LF
860939688137*5V1LF
860939688947*5E3LF
860943276147*5ELF
860934876147*5ELF
BPLDINSIGNAL1215EA4
Right Angle Header
C/2
Right Angle Header
B
Straight Receptacle
Right Angle Header
Straight Receptacle
B/2
2 row / 64 pos.
Straight Header
3 row / 96 pos.
R
2 row / 64 pos.
Right Angle Receptacle
3 row / 96 pos.
2 row / 32 pos.
Straight Header
R/2
Right Angle Receptacle
Q
Straight Header
3 row / 48 pos.
2 row / 32 pos.
3 row / 48 pos.
2 row / 64 pos.
a&c
a, b, c
a&c
a, b, c
a&c
a, b, c
a&c
a, b, c
a&b
860934876947*5E1LF
860943286137*5E1LF
860934886137*5E1LF
860926458147*5ELF
Notes
Asterisk (*) in part number denotes Performance class: PN Code 6,5,4 for Class 1, 2 & 3 respectively. Custom loading and other options available on request.
For more information,
please contact: Communications@fci.com
or visit us at
www.fci.com
Disclaimer
Please note that the above information is subject to change without notice.
[i=s]This post was last edited by googe on 2015-4-27 17:11[/i] As the title says, my interest has shifted, so I plan to sell the FPGA development board I have. I have put it on Taobao: [url=http://2.t...
I'm using EVC to build a project. It works fine when running at full speed, but I can't set breakpoints. One or more breakpoints could not be moved and have been disabled. Thank you in advance for you...
I use c8051f064 to make a simple data acquisition program, using DMA to store the AD converted data in the on-chip XRAM. The program is as follows, some of which refer to routines, but the program see...
[font=宋体][size=5]When editing the schematic library (xxx.schlib) in AD10, the following dialog box 1 will occasionally pop up. Ignore this dialog box and save the edited content. The dialog box 2 will...
After MT8816 completes the first switch action, it writes a new address and switch control word. At this time, because the previous address is not cleared, the previous address and the current address...
According to foreign media reports, Ford Motor has applied to the U.S. Patent and Social Security Administration (USPTO) for a patent for a remote vehicle control system that may be used in future ...[Details]
As more and more consumers purchase new energy vehicles, the safety of electric vehicles has become a major concern. This has been particularly prominent following a series of electric vehicle fire...[Details]
Long ago, the lifespan of cars in my country was 15 years. Once a car reached 15 years old, it was forced to be scrapped. However, the policy was later changed. As long as the car does not exceed 6...[Details]
The mass production process of the new generation of cockpit platform has started, and the smart cockpit market has entered a new bonus cycle of technology iteration and platform upgrade.
...[Details]
When discussing autonomous driving technology, there are often two extremes: on the one hand, there's the vision of "fully autonomous driving," while on the other, there's concern about potential s...[Details]
introduction
According to the China Fire Statistics Yearbook, electrical fires accounted for more than 30% of fire accidents in the past decade, and the trend is increasing year by year. They ...[Details]
Laird Thermal Systems has introduced the HiTemp ET series Peltier cooler modules, which can operate at high temperatures and provide on-site cooling for sensitive electronic devices.
Dig...[Details]
In the electronics manufacturing industry, surface mount technology (SMT) placement machines are core equipment for production lines. However, with many different models available on the market, ch...[Details]
According to foreign media reports, Ford Motor has applied to the U.S. Patent and Social Security Office (USPTO) for a patent for a door anti-collision system that may be used in future Ford vehicl...[Details]
The difference between a series inverter and a parallel inverter is that they use different oscillation circuits. A series inverter connects L, R, and C in series, while a parallel inverter connect...[Details]
With the increasing popularity of automated equipment, linear modules, a common auxiliary device for automated equipment, have also seen a bright future. In particular, in recent years, many small ...[Details]
Plug-in hybrid vehicles (PHEVs) utilize two powertrains. Their pure electric range is typically inferior to that of pure electric vehicles, often reaching less than half that. Currently, mainstream...[Details]
When American cartoonist Chester Gould sketched the watch on Dick Tracy's wrist, he had no idea that science fiction would become reality 70 years later. As a comic strip artist, Gould imagined fut...[Details]
Smartphones can be incredibly unintelligent. For example, consider an office full of people, each absorbed in their work. Suddenly, the silence is broken by a burst of loud pop music. A colleague's...[Details]
introduction
A common voltage regulator is a three-terminal one. Its function is to step down the voltage and stabilize it at a fixed output value. Voltage regulators are commonly available in...[Details]
Buy&Sell
京公网安备 11010802033920号
EEWORLD
