WINSLOW ADAPTICs
Data Sheet – Stamped I.C. Sockets
W3100TRC
W3100T
The W3100 Series uses a phosphor bronze contact with 2 plating options
RHoS compliant Tin or Tin/Lead . Moulding material is 30%GF PBT rated
to UL 94 V-0. Designed for automatic PCB loading machines features in-
clude; overstress protection, large target area for ease of IC insertion and
a 35 degree angled contact to prevent the IC leg from going behind the
contact during insertion.
Part No.
W3106TRC
W3108TRC
W3114TRC
W3116TRC
W3118TRC
W3120TRC
W3122TRC
W3124/3TRC
W3124/4TRC
W3124TRC
W3128/3TRC
W3128TRC
W3132TRC
W3140TRC
W3142TRC
W3148TRC
W3164TRC
Pins
6
8
14
16
18
20
22
24
24
24
28
28
32
40
42
48
64
Pitch
7.62
7.62
7.62
7.62
7.62
7.62
A
7.49
B
10.14
Part No.
W3106T
W3108T
W3114T
W3116T
W3118T
W3120T
W3122T
W3124/3T
W3124/4T
W3124T
W3128/3T
W3128T
W3132T
W3140T
W3142T
W3148T
W3164T
Pins Pitch
6
8
14
16
18
20
22
24
24
24
28
28
32
40
42
48
64
7.62
A
7.49
B
10.14
10.03 10.14
17.65 10.14
20.19 10.14
22.73 10.14
25.27 10.14
7.62 10.03 10.14
7.62 17.65 10.14
7.62 20.19 10.14
7.62 22.73 10.14
7.62 25.27 10.14
10.16 27.81 12.68
7.62 30.35 10.14
10.16 30.35 12.68
15.25 30.35 17.78
7.62 35.53 10.14
15.24 35.53 17.78
15.24 40.51 17.78
15.24 50.67 17.78
15.24 53.21 17.78
15.25 60.83 17.78
22.86 81.15 25.40
10.16 27.81 12.68
7.62
30.35 10.14
10.16 30.35 12.68
15.24 30.35 17.78
7.62
35.53 10.14
15.24 35.53 17.78
15.24 40.51 17.78
15.24 50.67 17.78
15.24 53.21 17.78
15.24 60.83 17.78
22.86 81.15 25.40
Note: Dimensions are subject to change without prior notice.
WINSLOW ADAPTICs
Data Sheet – Stamped I.C. Sockets
W3100TRC
W3100T
General Specifications.
Unless stated all values are typical.
Contact
Resistance:
Current Rating:
Capacitance:
Material:
Plating:
10m ohms
10 amp cont. 2.0 amp peak.
0.5pF
Phosphor Bronze
W3100TRC Nickel 2.5 microns over Pure Tin 6.0 microns
W3100T
60/40 tin/lead 2/3 microns.
W3100G
Gold in contact area only with solder tail microns over
plated Nickel 2.5 Pure Tin 6.0 microns
120/130 grams (1.18/1.27n) per pin 0.01” diameter.
50/70 grams (0.49/0.69n) per pin 0.01” diameter.
0.061” (1.70mm) from top of socket.
1.0lb minimum
Glass-reinforced Polyester (PBT)
1010 Ohms (contact to contact) at 500VDC
145 seconds at 23 degrees C
121KV/cm at 23 degrees C
3.9 (48 hrs 90%RH) at 100Hz 23 degrees C
4.5 at 100Hz 121 degrees C
3.7 (48 hrs 90%RH) at 1MHz 23 degrees C
4.3 at 1MHz 121 degrees C
0.0077 (48 hrs 30%RH) at 100Hz 23 degrees C
0.0300 at 100Hz 121 degrees C
0.0150 (48 hrs 30%RH) at 1MHz 23 degrees C
0.0200 at 1MHz 121 degrees C
3 x 1013ohms-CM (48 hrs 90%RH) at 25 degrees C
1013ohms-CM at 121 degrees C
-65 to 150 degrees C
UL94V-0
Insertion Force:
Withdrawal Force:
Point of contact:
Force to remove
From moulding:
Moulding
Material:
Insulation Resistance:
Arc Resistance:
Electrical Strength:
Dielectric Constant:
Dissipation Factor:
Volume Resistively:
Operating Temperature:
Flammability:
sales@winslowadaptics.com
DIP Support products from Winslow Adaptics
www.winslowadaptics.com
Custom Upgrades
Package
Conversion
Pitch Change
Also available from Winslow Adaptics are cost effective, time saving solutions to test, obsolescence,
supply problems and upgrades. OEMs can upgrade equipment with custom Adaptics utilising additional
logic, often saving considerable cost and time on re-design. If lead-time becomes an issue contact us
for a suitable package converter. We specialise in conversion of all package lead-frames.