-
CMSIS Driver has similar API functions and similar calling methods. It is a further encapsulation based on the ST HAL library. It is much more convenient and simpler to use and configure than the ST ...[Details]
-
├── STM32_USB_Device_Library USB从设备库 │ │ ├── Class │ │ │ └── hid │ │ │ ├── inc │ │ │ │ └── usbd_hid_core.h │ │ │ └── src │ ...[Details]
-
LAN8720 configuration: IP: 192.168.192.30 Gateway: 192.168.192.1 A high frequency of ARP packets is detected The content of the packet asks for the mac address of 192.168.192.1, and asks the resp...[Details]
-
Serial Port: 一. USART_ITConfig(USART1, USART_IT_TXE, ENABLE): As long as the transmit register is empty, there will always be an interrupt. Therefore, if you are not sending data, turn off the tran...[Details]
-
Notes on inverter installation and maintenance:
1. Before installation, you should first check whether the inverter is damaged during transportation.
2. When selecting an installa...[Details]
-
The independent watchdog of STM32 is driven by a dedicated internal 40Khz low-speed clock, that is, it is still effective even if the main clock fails. Here we need to note that the clock of the inde...[Details]
-
1. A/D (Analog-to-Digital) and D/A (Digital-to-Analog) Conversion 1. Pin AOUT: Analog output Vref: reference voltage AGND: Analog ground EXT: Ground OSC: Floating SCL，SDA：IIC AIN0, AIN1, AIN2: anal...[Details]
-
In one of my products, there are two chips, AVR and PIC, at the same time. When AVR drives the relay, then drives the contactor. PIC is used for display. I found that PIC actually has a little interf...[Details]
-
At the early morning of November 17th, Beijing time, at the Global Supercomputing Conference held in Denver, the United States, the "nonlinear earthquake simulation" application completed by the te...[Details]
-
/*34864 Chinese character library*/ // Connection of MCU //******************************************************** //p3= data port //p4--control port// p4.0 = rs //p4.1= r/w //p4.2= e //...[Details]
-
MSP 430 MCU 18B20 Thermometer #include "msp430x22x4.h" typedef unsigned char uchar; typedef unsigned int uint; #define DQ1 P2OUT |= BIT4 #define DQ0 P2OUT &= ~BIT4 #define DQ_in P2DIR &= ~BIT4...[Details]
-
#include "MSP430x11x1.h" #define uint unsigned int #define uchar unsigned char //Device address uchar PCF8576=0x70; //Memory data definition uchar ByteCnt; //I2C data byte counter uchar S...[Details]
-
The basic command syntax of EMC is actually only 57/58. How to change it depends on your practice. However, it is always easy for novices to fall into some misunderstandings, and some of the techni...[Details]
-
; *************************************************** ; * Function : 8 LED flash program * ; * MICroProcessor : HT48R50A-1/28SKDIP-A * ; *Author: www.picr.com * ; * Crystal : 4...[Details]
-
AES and Mitsubishi will use energy storage systems supplied by Fluence at a substation operated by Tata Power-DDL in Rohini, Delhi.
The project, expected to be completed later this...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
