Maybe some people still don't know what time synchronization and frequency synchronization are, but we all know GPS, Beidou and GLONASS. Maybe some people are experts in time and frequency synchroniza...
1. Write an interrupt service routine
Write an ISR function c_intXX in the .c source file for interrupt processing, such as:
interrupt void c_intXX (void)
{…;
}
Note: For hardware interrupts, XX = 00~...
The setting is: AT+CNMI=2,1 When the MCU receives the message, sometimes there is a new message prompt, and sometimes there is no new message prompt (no prompt is the majority of the time). Why is thi...
I use FPGA to configure ADV7181B through I2C. Through the logic analyzer, I can see that the device address, slave address, and data output by the FPGA are all correct, but ADV7181 does not respond. H...
1. Project BackgroundIn urban sewage treatment, the construction of urban sewage treatment facilities has been mentioned in a prominent position in urban infrastructure construction, which has brought...
The power supply voltage of 74HC4051 is 9V. I want to use the microcontroller c8051f350 with a high level of 3.3V to control it. How can I increase the high level voltage if the high level is not enou...
The rapid development of the Internet has realized high-speed information transmission and resource sharing, greatly facilitating people's lives. Embedded systems are widely used in various electr...[Details]
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
All electronic design engineers and scientists have performed electrical signal analysis, or signal analysis for short. Through this basic measurement, they can gain insight into signal details and...[Details]
introduction
Solar cells and LED lighting are typical applications of new energy and energy-saving and efficient technologies. Solar LED lighting uses solar cells to convert solar energy...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
1. Introduction
At present, most lighting equipment still uses traditional energy for lighting. Making full use of solar energy as the energy supply for lighting equipment is of great si...[Details]
AD8205 is
a single-supply high-performance differential
amplifier
launched by
Analog
Devices of the United States
. The typical single-supply voltage is 5V, and its common-mode volta...[Details]
Overview:
This paper introduces a method of connecting a CAN-bus network with Ethernet to form a medium-sized remote monitoring/data transmission network.
CAN (Controller Area Network) is ...[Details]
1 Introduction
In recent years, there have been many major advances in the production technology and processes of automotive headlights, which have greatly improved the performance of automoti...[Details]
LED lamps and bulbs are now rapidly replacing incandescent, halogen and CFL (compact fluorescent lamp) light sources in many general lighting applications. Flyback DC/DC converters are the power su...[Details]
Many battery-powered systems require a visual indicator to show when the battery needs to be replaced. LEDs are commonly used for this purpose, but they consume at least 10mA of current. This con...[Details]
Nippon Electric Works and Volvo Technology Japan have developed a wireless power supply system for electric vehicles (EVs). Using this system, the two companies have successfully conducted an exper...[Details]
Different initialization between C8051F and 80C51 series microcontrollers
In the past 30 years, major electronic component manufacturers in the world have launched their own unique single-chip...[Details]
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
At present, how various communication technologies will evolve after 3G is a focus of great concern in the industry. Especially for TD-SCDMA, whether it can achieve smooth evolution to the next gen...[Details]