Whether you’re designing at the board or system level,
Microsemi’s customizable System-on-Chip (cSoC) devices and low
power FPGAs are your best choice.
The unique, flash-based technology of Microsemi FPGAs, coupled with their history of reliability,
sets them apart from traditional FPGAs.
Design for today’s rapidly growing markets of consumer and portable medical devices, or tomorrow’s environmentally friendly data
centers, industrial controls and military and commercial aircraft. Only Microsemi can meet the power, size, cost and reliability targets
that reduce time-to-market and enable long-term profitability.
Table of Contents
SmartFusion
®
Fusion
Extended Temperature Fusion
• Customizable System-on-Chip (cSoC)
• Mixed Signal FPGAs
• Mixed Signal Integration Down to –55ºC
• Reprogrammable Digital Logic and Configurable Analog
• Embedded Flash Memory
• Low Power
• Small Package Footprint
• High Logic Density
• Low Power
• Small Package Footprint
• Low Power
• Small Package Footprint
• High I/O-to-Logic Ratio
• High Logic Density
• High Performance
• Low Cost
• Small Package Footprint
• High Performance
• Low Cost
•
•
•
•
Low Power
High Logic Density
High Performance
Low Cost
4
5
6
IGLOO
®
/e
IGLOO nano
IGLOO PLUS
7
8
9
ProASIC 3/E
®
10
ProASIC3 nano
11
ProASIC3L
12
Military ProASIC3/EL
• Unprecedented Low Power Consumption Across
the Full Military Temperature Range
• High-Density Fine-Pitch Ball Grid Packaging
• High Performance and Easy In-System Programming
• Industry’s First Military Screened Flash FPGA
• Full Processing to MIL-STD-883 Class B
• Established Heritage on Commercial and Military Aircraft
• I/O Counts
• Package Dimensions
13
Military ProASIC
I/O Table
FPGA Packages
Axcelerator
®
SX-A
MX
Design Tools
PLUS®
13
14
16
18
19
20
• Design Environment for Microsemi Flash Devices
• Starter, Evaluation and Demonstration Kits
• FlashPro3 and Silicon Sculptor 3 Programmers
• Microsemi IP Cores
21
22
26
27
Development Kits
Programmers
Intellectual Property Cores
Please refer to www.microsemi.com/soc and appropriate product datasheets for the latest device information, valid ordering codes and more
information regarding previous generations of flash and antifuse FPGAs.
www.microsemi.com/soc
3
SmartFusion
The customizable system-on-chip (cSoC) device
SmartFusion cSoCs are the only devices that integrate FPGA fabric, an ARM
®
Cortex
™
-M3 processor and programmable analog, offering full customization, IP
protection and ease-of-use. Based on Microsemi’s proprietary flash process, SmartFusion cSoCs are ideal for hardware and embedded designers who need a true
system-on-chip that gives more flexibility than traditional fixed-function microcontrollers without the excessive cost of soft processor cores on traditional FPGAs.
• Available in commercial, industrial
and military* grades
• Hard 100 MHz 32-bit ARM
Cortex-M3 CPU
• Multi-layer AHB communications
matrix with up to 16 Gbps throughput
* Under development
• 10/100 Ethernet MAC
• Two peripherals of each type:
SPI, I
2
C, UART, and 32-bit timers
• Up to 512 KB flash and
64 KB SRAM
• External memory controller (EMC)
• 8-channel DMA controller
• Integrated analog-to-digital
converters (ADCs) and digital-
to-analog converters (DACs)
with 1 percent accuracy
• On-chip voltage, current and
temperature monitors
• Up to ten 15 ns high-speed
comparators
• Analog compute engine (ACE)
offloads CPU from analog
processing
• Up to 35 analog I/Os and
169 digital GPIOs
SmartFusion Devices
SmartFusion Devices
System Gates
FPGA Fabric
Tiles (D-flip-flops)
RAM Blocks (4,608 bits)
Flash (Kbytes)
SRAM (Kbytes)
Cortex-M3 with
Memory Protection Unit (MPU)
10/100 Ethernet MAC
External Memory Controller (EMC)
Microcontroller
Subsystem (MSS)
DMA
I2C
SPI
16550 UART
32-Bit Timer
PLL
32 KHz Low Power Oscillator
100 MHz On-Chip RC Oscillator
Sm a rtF us io n
Main Oscillator (32 KHz to 20 MHz)
ADCs (8-/10-/12-bit SAR)
DACs (12-bit sigma-delta)
Programmable
Analog
Signal Conditioning Blocks (SCBs)
Comparators
3
Current Monitors
3
Temperature Monitors
3
Bipolar High Voltage Monitors
3
A2F060
60,000
1,536
8
128
16
Yes
No
24-bit address, 16-bit data
8 Ch
2
2
2
2
1
1
1
1
1
1
1
2
1
1
2
A2F200
200,000
4,608
8
256
64
Yes
Yes
24-bit address, 16-bit data
8 Ch
2
2
2
2
1
1
1
1
2
2
4
8
4
4
8
A2F500
500,000
11,520
24
512
64
Yes
Yes
24-bit address, 16-bit data
1
8 Ch
2
2
2
2
2
2
1
1
1
3
4
3
4
5
4
10
4
5
4
5
4
10
4
Notes:
1. Not available on A2F500 for the PQ208 package.
2. Two PLLs are available in CS288 and FG484 (one PLL in FG256 and PQ208).
3. These functions share I/O pins and may not all be available at the same time.
4. Available on FG484 only. PQ208, FG256, and CS288 packages offer the same programmable analog capabilities as A2F200.
Package I/Os: MSS + FPGA I/Os
Device
Direct Analog Input
Shared Analog Input
1
Total Analog Input
Total Analog Output
MSS I/Os
2,3
A2F060
TQ144
11
4
15
1
21
4
A2F200
FG256
11
4
15
1
26
4
A2F500
FG484
8
16
24
2
41
94
161
PQ208
8
16
24
1
22
66
5
CS288
11
4
15
1
28
4
PQ208
8
16
24
1
22
66
113
CS288
8
16
24
2
31
78
135
FG256
8
16
24
2
25
66
117
CS288
8
16
24
2
31
78
135
FG256
8
16
24
2
25
66
117
FG484
12
20
32
3
41
128
204
FPGA I/Os
Total I/Os
33
70
68
112
66
108
113
Notes:
1. These pins are shared between direct analog inputs to the ADCs and voltage/current/temperature monitors.
2. 16 MSS I/Os are multiplexed and can be used as FPGA I/Os, if not needed for the MSS. These I/Os support Schmitt triggers and support only LVTTL and LVCMOS (1.5 / 1.8 / 2.5, 3.3 V) standards.
3. 9 MSS I/Os are primarily for 10/00 Ethernet MAC and are also multiplexed and can be used as FPGA I/Os if Ethernet MAC is not used in a design. These I/Os support Schmitt triggers and support only LVTTL and LVCMOS
(1.5 / 1.8 / 2.5, 3.3 V) standards.
4. 10/100 Ethernet MAC is not available on A2F060.
5. EMC is not available on the A2F500 PQ208 package.
4
www.microsemi.com/soc
Fusion
The world’s first mixed signal FPGA
Fusion FPGAs integrate configurable analog, large flash memory blocks, comprehensive clock generation and management circuitry and high-performance,
flash-based programmable logic in a monolithic device. The Fusion architecture can be used with soft microcontroller cores, such as the performance-optimized
ARM Cortex-M1, 8051s or Microsemi’s own CoreABC, the smallest soft microcontroller for FPGAs.
• Integrated A/D converter (ADC)
with 8-, 10- and 12-bit
resolution and 30 scalable
analog input channels
• ADC accuracy better than
1 percent
• On-chip voltage, current and
temperature monitors
• In-system configurable
analog supports a wide
variety of applications
• Up to 1 MB of user flash memory
• Extensive clocking resources
• Analog PLLs
• 1 percent RC oscillator
• Crystal oscillator circuit
• Real-time counter (RTC)
• Flash FPGA fabric
• Reprogrammable
• Live at power-up
• Maximum design security
• Ultra-low power
• Configuration memory error
immune
• Clock management
• Advanced I/O standards
• User nonvolatile FlashROM
Fusion Devices
Fusion Devices
Cortex-M1 Devices
1
Pigeon Point Devices
MicroBlade Devices
System Gates
Tiles (D–flip–flops)
General
Information
AES-protected ISP
PLLs
Globals
Flash Memory Blocks (2 Mbits)
Total Flash Memory Bits
Memory
FlashROM Bits
RAM Blocks (4,608 bits)
RAM (Kbits)
Analog Quads
Analog Input Channels
Analog and I/Os
Gate Driver Outputs
I/O Banks (+ JTAG)
Maximum Digital I/Os
Analog I/Os
Notes:
1. Refer to the Cortex-M1 product brief for more information.
2. Pigeon Point devices only offered in FG484 and FG256 packages.
3. MicroBlade devices only offered in FG256 package.
AFS090
AFS250
M1AFS250
AFS600
M1AFS600
P1AFS600
2
AFS1500
M1AFS1500
P1AFS1500
2
U1AFS600
3
90,000
2,304
Yes
1
18
1
2M
1,024
6
27
5
15
5
4
75
20
250,000
6,144
Yes
1
18
1
2M
1,024
8
36
6
18
6
4
114
24
600,000
13,824
Yes
2
18
2
4M
1,024
24
108
10
30
10
5
172
40
1,500,000
38,400
Yes
2
18
4
8M
1,024
60
270
10
30
10
5
252
40
F us io n
Package I/Os: Single-/Double-Ended (Analog)
Fusion Mixed Signal FPGAs
Cortex-M1 Devices
Pigeon Point Devices
MicroBlade Devices
QN108
3
QN180
3
AFS090
AFS250
M1AFS250
AFS600
M1AFS600
P1AFS600
1
U1AFS600
2
AFS1500
M1AFS1500
P1AFS1500
1
37/9 (16)
60/16 (20)
—
75/22 (20)
—
—
—
65/15 (24)
93/26 (24)
114/37 (24)
—
—
—
—
95/46 (40)
119/58 (40)
172/86 (40)
—
—
—
—
119/58 (40)
223/109 (40)
252/126 (40)
PQ208
4
FG256
5
FG484
5
FG676
5
Notes:
1. Pigeon Point devices only offered in FG484 and FG256 packages.
2. MicroBlade devices only offered in FG256 package.
3. These packages are available only as RoHS-compliant (QNG package specifier).
4. AFS250 and AFS600 PQ208 devices are not pin-compatible.
5. Available in RoHS-compliant and standard leaded packages.
Use PIC12F683 microcontroller for monitoring and management. Two voltage points are set internally. The values of high and low voltage points can be set by serial port software. The hysteresis coeffic...
I would like to ask you, how to confirm whether BGA parts are EOS? Take Broadcom parts as an example. ESD protection has been done during use, but it will still be judged as EOS by BCM analysis. Is th...
In the interrupt program of C51, you can use using to specify the register group to make the interrupt program faster. Using 1 The interrupt program uses register group 1. The default register group u...
I want to learn Zigbee recently, but it's hard to find information. Can anyone give me some practical information, preferably from entry level to mastery? If you have any, please send it to my email [...
I have set the top-level file , and the project name and the top-level file name are actually the same, but why is it still not working, even for the mini- programs ? Please help me , I remember that ...
Microchip's PIC18F46J50 is a low-power, high-performance 8-bit USB microcontroller (MCU) using nanoWatt XLP technology. The current in deep sleep mode can be as low as 13nA, the operating voltage i...[Details]
1 Introduction
The high temperature tester is mainly used for temperature tracking measurement and data acquisition during the heating process. By systematically analyzing the test data, the...[Details]
Google's driverless technology is not only an eye-catching technology, but also a subversion of the car usage model.
Those who have watched anti-terrorism films and TV dramas must have been im...[Details]
0. Introduction
In daily life, we often see some special-purpose vehicles. When these vehicles pass through intersections, they often obtain the right of way at intersections by temporarily op...[Details]
Two simple circuits are implemented to drive two LEDs from a battery powered microprocessor.
This design is based on a circuit that uses three resistors and a microprocessor I/O pin as an input h...[Details]
Microcalorimetry
is used to determine energy relationships. Microcalorimetry techniques are often required when performing calorimetric experiments with small sample sizes or slow heating rat...[Details]
Overview
As a remote network communication control method with advanced technology, high reliability, complete functions and reasonable cost, CAN-bus has been widely used in various automa...[Details]
Today, with energy becoming increasingly scarce, the utilization of natural energy has become the focus of people's attention. Among various natural energies, the endless solar energy is highly fav...[Details]
introduction
At present, measuring instruments are developing towards networking, and each individual embedded instrument will become a node on the Internet. This system realizes the network...[Details]
Introduction
In industrial control, speed measurement is often required. Generally, a contact tachometer is used. This tachometer must be placed against the center of the shaft to measure. It...[Details]
Every time I go home and walk up the stairs, I am always scared. The corridor lights are often broken, and no one changes the bulbs, or they are not smart enough and need to be operated manually. E...[Details]
LED is now known as the fourth generation of light sources. High-power LED has many advantages over traditional light sources in outdoor lighting.
1 LED lamps have high light efficiency
C...[Details]
The capacity of a battery depends on the amount of charge and discharge, in addition to some factors of the battery itself. Obviously, if the charge and discharge of the battery can be recorded all...[Details]
This article focuses on closing the feedback loop of an isolated power supply using a TL431 shunt regulator. The article discusses a method to extend the bandwidth of the power supply control loop ...[Details]
1 Introduction
Automatic Test
System The ATS (Automatic Test System) integrates all the stimulus and measurement equipment required for testing.
The computer
efficiently comp...[Details]
Microchip MCU
京公网安备 11010802033920号
EEWORLD
