After a day of hard work, I finally got the snake done, but the effect is still not good enough. When the snake grows (after 4), there is an obvious flickering problem. In addition, the scanning matri...
The circuit board needs 5V 3.3V 12V power supply, and the power input is AC220V. I want to use a switching power supply module with two outputs, one 12V output is used to power the GPRS DTU on the cir...
Define two 32-bit fixed-point (int32) variables X and Y in CLARAM2. Both CPU and CLA can read and write X and Y. Assign values to X and Y in CPU and calculate Z = X*Y in CLA. Z is also a 32-bit fixed-...
Calibrators are widely used in university experiments. Among them, there are two experiments in nuclear physics experiments in modern physics experiments (GM counter and β absorption) that require ...[Details]
Although improper medical device product design is not always associated with medical device-related errors. Studies of users have shown that lack of adequate training accounts for 70% to 90% of suc...[Details]
For more than 10 years, analog-to-digital converters (ADCs) have been widely used in industrial process control, medical instruments, communication systems, radar and other products as a booster of in...[Details]
This article discusses how to use an ultra-low-power RF transceiver chip from Zarlink Semiconductor for pacemakers, neurostimulators, drug pumps, and other such implantable medical devices t...[Details]
Due to the needs of medical development, in many cases, general thermometers can no longer meet the requirements of fast and accurate temperature measurement, such as measuring human body temperature ...[Details]
Preface
In recent years, many compact portable electronic products have been developed, such as mobile phones, digital cameras, MP3, MP4, PDA, GPS and DVD, etc. They are not only small in size...[Details]
A correct circuit design cannot be manufactured 100% correctly when it is taken to the factory for manufacturing. It will always be affected by various uncertainties, such as deviations in manufact...[Details]
Application of TWLA500 in ADC and related fields
FAE: On-site technical support. Provide technical support to customers on the application of the products you sell, and handle quality ...[Details]
With the advent of the new economic era represented by the Internet, PCs have lost their former glory, and smart 3C products (Computer, Communication and Consumer) will set off a new wave. As one o...[Details]
The PIC series 8-bit single-chip microcomputer (RISC microcontroller) developed by Microchip Technology Inc. in the United States, especially the microcontroller with built-in second-generation Flash ...[Details]
Mesh network architecture and advantages
The Internet is a flat network. The routers that make up the Internet are on the same plane. The mesh network formed by multiple paths between ...[Details]
1 TM Card Introduction
TM (Touch Memory) card is a patented product of Dallas Company in the United States. It uses single-line protocol communication and completes data reading and writin...[Details]
0 Introduction
Electric vehicles are high-tech products that integrate computer technology, communication technology, electronic technology, and new material technology. They have a complex ...[Details]
introduction
The stepper motor is a control actuator and one of the key products of mechatronics. It is widely used in various automation control systems and precision machinery. The stepper...[Details]
1 Introduction
JPEG2000 is a new generation of international standard for still image compression, which has superior image compression performance and high image quality. It not only over...[Details]
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD
