DATA SHEET
|
FEBRUARY 2006
PONA 3000 Series Erbium Doped Fiber Amplifier
Applications
•
•
•
•
High performance supertrunking links
High power distribution networks
Fiber Deep architectures
FTTx networks
Features
•
•
•
•
Full Function High Power Fiber Optic
Amplifier Ready for Integration
Low Noise Figure (Typ < 6 dB)
Total Input Power Range: –10 dBm to
+12 dBm
Total Output Power: +30 dBm to +35
dBm (optical output power splitter is
optional for these units)
•
•
•
•
•
Standard RS-232 Communications
2
(RS-485 or I C - optional)
The ORTEL PONA 3000 Series Fiber Optical Amplifier Module is an
ideal building block for OEM system integrators. The family of PONA
3000 Optical Amplifiers is designed to meet the most demanding
noise performance requirements of CATV and FTTx applications, and
performs all the functions required of an optical amplifier for system
integration. PONA 3000 series optical amplifiers provide optical
isolation on the input and output of the gain block for stable, low noise
operation.
The input and output optical signal power levels are
The input optical signal is
Low Electrical Power Consumption
Input / Output Isolation > 40/40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.5 ps
detected for monitoring and control.
amplified with active gain control for a constant output power level, or
with active output power control for constant gain mode. The PONA
3000 series optical amplifiers also provide monitoring functions and
associated alarms for all vital characteristics. The optical output of the
PONA 3000 series optical amplifiers can be split into number of ports
by an optional internal splitter.
PONA3000 series includes AC/DC Power Supply, Front Panel,
Optical Splitters, network card and all necessary connectors.
1 of 5
For more information on this and other products:
Contact Sales at Ortel 626-293-3400, or visit www.ortel.com.
PONA3000 Series High Power EDFA
Revision C
DATA SHEET
|
FEBRUARY 2006
Specifications
PROPERTY
Product Code
PERFORMANCE
Operating Input Power
Operating Input Power
Output Power
Noise Figure
Static Gain Flatness
Dynamic Gain Flatness
Output Power Stability
Power Consumption
(steady state regime)
Remnant pump power to output
UNIT
LIMIT
PONA MODELS
3030
3032
3035
+12
-10
30.0
5.5/6.0
+/-1.0
+/-2.00
+/- 0.25
50
30
<-30
+12
-10
32.0
5.5/6.0
+/-1.0
+/-2.25
+/- 0.25
65
40
<-30
+12
-10
35.0
5.5/6.0
+/-1.0
+/-2.50
+/- 0.25
80
50
<-30
COMMENT
(note 1)
Pin (dBm)
Pin (dBm)
Po (dBm)
NF (dB)
GF (dB)
(dB)
(dB)
Psys (W)
Max
Min
Typ/Max
Max
Max
Max
Max
Nominal (note 2)
(note 3)
(note 4)
(note 5)
(note 6)
50
o
C Case (premium)
50
o
C Case (economy)
(note7)
Prp (dBm)
Nom.
Notes:
1) Unless stated otherwise all specifications apply over the full temperature range and humidity
2) Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB less than the actual value.
3) Measured @ 25°C,
ΣPin
= 0 dBm
4) Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C
5) Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C;
6) Stability over polarization and temperature
7) Premium version – PONA with cooled, Telcordia qualified pumps
Economy version – PONA with uncooled pumps
Physical
GENERAL PROPERTY
Operating Wavelength
Operating Case Temperature
Storage Temperature
Operating Humidity
Voltage Supply Range
REQUIREMENT
1545 ~ 1562nm
0°C to 50°C
-40°C to 85°C
20% to 85%
85 VAC to 265 VAC 50/60 Hz
-36 to –60 V DC
COMMENTS
Standard
Standard
Standard
Non-condensing
AC version
DC version
*(Redundant Power Supply is
available by Customer request
Optical Connectors
Dimensions In Inches
See ordering information
19.0”W x 14.76”D x 3.44”H
User Specified
19’’ Rack Mounted, 2 RU
2 of 5
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2003. EMCORE Corporation
PONA3000 Series High Power EDFA
Revision C
DATA SHEET
|
FEBRUARY 2006
Block Diagram: Cladding Pump Technology
Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and
multi-mode pump lasers) to produce cost effective high power optical amplification. This technology
enables the development of higher power EDFAs-something that was cost inhibitor when using
standard Erbium fiber and single mode pumps.
Er/Yb Assembly
Input
Hybrid
Er
Filter / Isolator
Isolator
1% Tap
980 nm
pump
Input
monitor
Multi-mode
pumps
Output
Monitor
Drive
Electronics
Sample FTTx Architecture
Splitter
Voice
Data
OLT
1490nm
1310nm
ONT
ONT
ONT
ONT
Businesses
- Voice
- Data
- Video
WDM
1550nm
1550nm
Tx
Video
RF
Splitter
Splitter
ONT
ONT
ONT
ONT
Multi
Dwelling Units
20 Km
Splitter
ONT
ONT
ONT
ONT
EDFA
20
outputs of
20
dBm
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Homes
3 of 5
Copyright 2003. EMCORE Corporation
PONA3000 Series High Power EDFA
Revision C
DATA SHEET
|
FEBRUARY 2006
Form Factor
4 of 5
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2003. EMCORE Corporation
PONA3000 Series High Power EDFA
Revision C
DATA SHEET
|
FEBRUARY 2006
Ordering Information
PONA30
-
-
-
-
-
Power
Level
30: 30 dBm
32: 32 dBm
35: 35 dBm
Connector
Options
SC: SC/APC
FC: FC/APC
EC: E2000/APC
TC: SC/UPC
GC: FC/UPC
# of Output
Ports
01: 1 port
02: 2 ports
04: 4 ports
08: 8 ports
16: 16 ports
20: 20 ports
Class
P: Premium
E: Economy
Input Voltage
AC: 90-260 VAC 50/60 Hz
DC: -48 VDC
Class:
Premium: Utilizes cooled pump lasers
Economy: Utilizes uncooled pump lasers
Qualifications
FCC: Subpart B. Part 15, class “A” Unintentional Radiators
CE: EN50083-2, 19995 with Amendment 1, which incorporates EN 55013 Radiated and
Conducted Emissions
EN 61000-4-3 Radiated Immunity
EN 55020 Conducted Immunity
EN 61000-3-2 Harmonics
All components meet Telcordia GR-1312 and GR-486 standards (Except pumps in
Economy Class).
EN 61000-3-2 Harmonics
Fit Rate:
•
90% level of confidence < 2000 @ 30°C Premium PONA 3035
•
90% level of confidence < 3500 @ 30°C Economy PONA 3035
5 of 5
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2003. EMCORE Corporation
京公网安备 11010802033920号
EEWORLD
