Note: If the working voltage (V) is lower than the rated
0.010 µF 3.5 7.5 7.2 5.0
400
320 e3
voltage (V
R
), the capacitor may work at higher dv/dt.
0.015 µF 4.5 9.5 7.2 5.0
400
320 e3
In this case the maximum value allowed is obtained
0.022 µF 4.5 9.5 7.2 5.0
400
320 e3
multiplying the above value (see table dv/dt) with the
0.033 µF 5.0 10.0 7.2 5.0
400
320 e3
ratio V
R
/V.
0.047 µF 6.0 11.0 7.2 5.0
400
320 e3
The pulse characteristic K
0
depends on the voltage
wave-form and in any case it cannot overcome the
Mechanical version and packaging (Table1)
Internal use
value given in the above table.
Tolerance: J (±5%); K (±10%); M (±20%)
R82MC2100
--
5
--
R82MC2150
--
5
--
R82MC2220
--
5
--
R82MC2330
--
5
--
R82MC2470
--
5
--
27
09/2008
Not for new design. Use new F611-F612 Series.
MeTAllIZeD POlyeSTeR FIlM CAPACITOR
D.C. MulTIPuRPOSe APPlICATIONS
p = 5 mm
PRoDUCT CoDe:
R82
MKT Series
R82
eleCTRICAl ChARACTeRISTICS
Rated voltage (V
R
):
Rated temperature (T
R
):
50 Vdc
250 Vdc
+85 °C
63 Vdc
400 Vdc
100 Vdc
TeST MeThOD AND PeRFORMANCe
Damp heat, steady state:
Test conditions
Temperature:
Relative humidity (RH):
Test duration:
Performance
Capacitance change |∆C/C|:
DF change (∆tgδ):
Insulation resistance:
Temperature derated voltage:
for temperatures between +85°C and +105°C a decreasing
factor of 1.25% per degree °C on the rated voltage V
R
(d.c.
and a.c.) has to be applied.
Capacitance range:
1000pF to 4.7µF
Capacitance values:
e6 series (IeC 60063 Norm).
Capacitance tolerances (measured at 1 khz):
±5% (J); ±10% (K); ±20% (M).
Total self-inductance (l):
≈7nH
max 1 nH per 1 mm lead and capacitor length.
Dissipation factor (DF):
tgδ 10
-4
at +25°C ±5°C
kHz
1
10
100
C
≤
0.1µF
C > 0.1µF
+40°C±2°C
93% ±2%
56 days
≤ 5%
≤ 50x10
-4
at 1kHz
≥ 50% of initial limit.
≤
80
≤
120
≤
250
≤
80
≤
120
endurance:
Test conditions
+105°C ±2°C
Temperature:
Test duration:
2000 h
Voltage applied:
1.25xV
C
Performance
Capacitance change |∆C/C|: ≤ 5%
DF change (∆tgδ): ≤ 30x10
-4
at 10kHz for C≤1µF
for C>1µF
≤ 20x10
-4
at 1kHz
Insulation resistance:
≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature:
+260°C±5°C
Dipping time (with heat screen):10 s ±1 s
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤ 30x10
-4
at 10kHz for C≤ 1µF
≤ 20x10
-4
at 1kHz for C> 1µF
Insulation resistance:
≥ initial limit.
long term stability
(after two years):
Storage:
standard environmental conditions (see page
12).
Performance
Capacitance change |∆C/C|: ≤ 3% for C≤ 0.1µF
≤ 2% for C> 0.1µF
RelIABIlITy:
Reference MIL HDB 217
Application conditions:
+40°C±2°C
Temperature:
Voltage:
0.5xV
R
Failure rate:
≤ 1 FIT
(1 FIT = 1x10
-9
failures/components x h)
Failure criteria:
(according to DIN 44122)
Short or open circuit
Capacitance change |∆C/C|: > 10%
DF change (∆tgδ):
> 2 x initial limit.
Insulation resistance:
< 0.005 x initial limit.
Insulation resistance:
Test conditions
Temperature:
Voltage charge time:
Voltage charge:
+25°C±5°C
1 min
50 Vdc for V
R
<100 Vdc
100 Vdc for V
R
≥100 Vdc
Performance
For V
R
≤100 Vdc
≥ 15000 MΩ for C ≤ 0.33µF
≥ 5000 s
for C > 0.33µF
and
≤1µF
≥ 1000 s
for C > 1µF
For V
R
>100 Vdc
≥ 30000 MΩ
*Typical
value
Test voltage between terminations:
1.4xV
R
applied for 2 s at +25°C±5°C.
09/2008
28
Not for new design. Use new F611-F612 Series.
MeTAllIZeD POlyeSTeR FIlM CAPACITOR
D.C. MulTIPuRPOSe APPlICATIONS
p = 5 mm
PRoDUCT CoDe:
R82
MKT Series
R82
MAX. VoLTAGe (Vr.m.s.) VeRSUS FReQUeNCY (sinusoidal wave-form / Th
≤
40°C)
29
09/2008
Not for new design. Use new F611-F612 Series.
MeTAllIZeD POlyeSTeR FIlM CAPACITOR
D.C. MulTIPuRPOSe APPlICATIONS
p = 5 mm
PRoDUCT CoDe:
R82
MKT Series
R82
MAX. CURReNT (Ir.m.s.) VeRSUS FReQUeNCY (sinusoidal wave-form / Th
≤
40°C)
1
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Do you have any experts who can achieve a buck-boost IC that can output 30V with an input of 24-36V (preferably 600mA). It would be best if the peripherals are simpler. Please help......
Core Tip: I still remember the first time I interviewed Dr. Kissinger. At that time, I was still studying in the United States and had just started doing talk shows. I had no experience at all. The qu...
I followed the serial communication class in "EVC Advanced Programming and Application Development", and then added a button to open the serial port and write to the serial port in the dialog box. The...
WiMax technology needs to demonstrate its advantages in specific application scenarios in order to gain market recognition, which requires application testing to measure system performance para...[Details]
0Introduction
In oil drilling, accurate measurement of wellbore posture is the premise of wellbore trajectory control. To this end, this paper fully combines the advantages of single-chip ...[Details]
Signal sources have developed to a very wide range today. We can classify them according to the frequency range: ultra-low frequency (0.1m～1kHz), audio (20Hz～20kHz), video (20kHz～10MHz), radio fre...[Details]
From the moment AVS video was born, scientists and engineers have been working tirelessly to reduce the size of audio and video bitstreams. Various advanced video compression algorithms have emerge...[Details]
With the rapid development of network technology and information communication, network economy and knowledge economy are no longer the exclusive domains of IT and other high-tech industries. The i...[Details]
According to In-Stat/MDR, the number of mobile phones with Bluetooth capabilities will reach at least 300 million by 2005. One of the clear evidences of the increasing adoption of Bluetooth is that...[Details]
Abstract: This paper introduces the origin and new features of MP4, and introduces the core audio compression technology MPEG-2 AAC (Advanced Audio Coding) based on MP4. Finally, it briefly summari...[Details]
IPTV (Internet Protocol TV or Interactive Personal TV), also known as interactive network television, is a new technology that uses broadband network infrastructure, takes home televisions or comp...[Details]
1 Introduction
Intelligent software agents are software programs that can perform specific tasks for users, have a certain degree of intelligence, can autonomously perform some tasks, and ...[Details]
Anyone who has owned a laptop computer will have noticed that when running on battery power, their portable device behaves differently than when running on AC mains power—the display dims, the proc...[Details]
Fieldbus is an open, digital, multi-point communication control system local area network, and is one of the most promising technologies in today's automation field. CAN bus is a hot application in fi...[Details]
Abstract:
Under high dynamic conditions, combined with GEC's twelve-channel correlator GP2021, this paper discusses the structural design of GPS receivers and the key technologies inv...[Details]
FSK (Frequeney-Shift Keying) uses carriers of different frequencies to transmit digital signals. FSK signals have the advantages of strong anti-interference ability and long transmission distance, and...[Details]
Abstract: In many SCART applications, due to the complex signal switching requirements, dedicated ICs are usually used to implement SCART connections. This will bring cost pressure to single SCART ...[Details]
0Introduction
Microactuators, as driving components of microelectromechanical systems (MEMS), have been widely studied. In recent years, actuators made of hard magnetic and soft magnetic m...[Details]
LED Zone
京公网安备 11010802033920号
EEWORLD
