Glueable
Chip Resistor
GCR Series
·
·
·
·
·
·
Suitable for conductive adhesive
Planar and wraparound versions
High temperature operation to 200°C
Non-magnetic (G, P & EW types)
Range 0805 to 2512 at 1R0 to 10M
RoHS compliant
Electrical Data
Size
Power @70°C
Resistance range
Tolerance
LEV
TCR
Operating temperature
Thermal Impedance
Values
W
ohms
%
V
ppm/°C
°C
°C/W
220
160
150
200
0805
0.125
1206
0.25
1, 5
400
<10R:200
≥10R:100
-55 to +200
75
40
E24 or E96 preferred - other values to special order
500
2010
0.625
1R0 to 10M
2512
1
Physical Data
(All dimensions in mm and nominal weight in g)
L
0805
1206
2010
2512
2.0
+0.2/-0.15
3.15
+0.2/-0.2
5.0
±0.2
6.25
±0.25
W
1.25
±0.15
1.6
±0.15
2.5
±0.2
3.2
±0.2
T
0.5
±0.15
0.5
±0.15
0.65
±0.15
0.65
±0.15
A&C
0.4
±0.2
0.45
±0.2
0.5
+0.25/-0.3
0.6
+0.25/-0.3
Wt.
0.009
0.020
W
T
A
L
A
W
T
G & P types
EW & GW types
0.036
0.055
L
Wrap-around terminations
(3 faces)
Construction
Planar gold G type or PtAg P types: Electrodes, resistor material
and overglaze are printed onto an alumina substrate. The
resistors are laser trimmed to the required value and protected.
Wraparound EW type: Thick-film PtAg electrodes, resistor
material and overglaze are printed onto an alumina substrate.
The resistors are laser trimmed to the required value and
protected. The terminations are wraparound coated with a
polymer Ag material.
Wraparound GW type: These are made as the EW type then
plated with a nickel barrier and Gold. All termination styles are
suitable for attachment with conductive adhesive.
Marking
The components are not marked; all data is printed onto the
packaging.
Solvent Resistance
The component is resistant to all normal industrial cleaning
solvents suitable for printed circuits.
General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
© TT electronics plc
08. 11
Glueable
Chip Resistor
GCR Series
Performance Data
Maximum
Load at rated power (1000hrs at 70°C)
Derating from rated power at 70°C
Short term overload
Dry heat (1000hrs at 200°C)
Damp heat steady state (56 days, 40°C,
≥90%
RH)
Climatic
Temperature rapid change (5 cycles -55ºC to +200ºC)
ΔR
ΔR
ΔR
ΔR
ΔR
ΔR
2% + 0.01Ω
See Derating Curve
1% + 0.01Ω
2% + 0.01Ω
1% + 0.01Ω
1% + 0.01Ω
1% + 0.01Ω
0
70
155
200
100%
Derating Curve
P/Pr
Ambient temperature degC
Packaging
0805 and 1206 GCR series resistors are supplied on 8mm carrier tape and 7 inch reels as per IEC 286-3, quantity per reel; 3000.
2010 and 2512 GCR series resistors are supplied on 12mm carrier tape and 7 inch reels as per IEC 286-3, quantity per reel; 2010:
3000pcs; 2512: 1800pcs.
Ordering Procedure
Example: GCR1206 in gold planar format at 10 kilohms and 1% tolerance packed in tape.
GCR1206 G - 10K
Type
Terminations
G
P
EW
GW
Gold planar
PtAg planar
Polymer Ag wraparound
Ni Barrier & Au plated wraparound
F
T3
Value (use IEC62 code)
Tolerance (use IEC62 code)
F
J
Packing
T3
T18
Tape
0805, 1206, 2010
2512
up to 3000/reel
up to 1800/reel
Standard
1%
5%
General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com www.irctt.com www.welwyn-tt.com
© TT electronics plc
08. 11
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
