AZ881
8 A SPST / 5 A DPST POLARIZED
SUBMINIATURE POWER RELAY
SINGLE SIDE STABLE (NON-LATCHING)
AND BISTABLE (LATCHING)
FEATURES
•
•
•
•
•
•
•
Dielectric strength 3000 Vrms
Single and dual coil latching versions available
Epoxy sealed version available
8 Amp switching
Class B (130°C) insulation standard
Class F (155°C) insulation available
UL, CUR file E44211
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Set Time (typical)
Minimum operations
1 x 10
7
1 x 10
5
at 8 A 250 VAC resistive (SPST)
5 ms at nominal coil voltage
3 ms at nominal coil voltage
(with no coil suppression)
5 ms at nominal coil voltage
4 ms at nominal coil voltage
4000 Vrms contact to coil
1000 Vrms between open contacts
2000 Vrms between contact sets
1000 megohms min. at 20°C
500 Vdc 50% RH
Greater than 10% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 130°C (266°F)
0.078” DA at 10 to 55 Hz
20 g functional
100 g destructive
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
4.7 grams
CONTACTS
Arrangement
Ratings
SPST (1 Form A), DPST (2 Form A)
DPST (1 Form A and 1 Form B)
Resistive load:
Max. switched power:
150 W or 2000 VA (SPST)
150 W or 1250 VA (DPST)
Max. switched current: 8 A (SPST)
5 A (DPST)
Max. switched voltage:150 VDC or 380 VAC*
Reset Time (typical)
Dielectric Strength
(at sea level)
Insulation Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
*Note: If switching voltage is greater than 30 VDC,
special precautions must be taken. Please contact
the factory.
Rated Load
UL, CUR
SPST
8 A at 250 VAC resistive, 100k cycles
5 A at 30 VDC resistive, 100k cycles
1/6 HP at 250 VAC
DPST
5 A at 250 VAC resistive, 100k cycles
5 A at 30 VDC resistive, 100k cycles
1/6 HP at 250 VAC
Material
Resistance
Silver nickel, gold plating optional
< 50 milliohms initially (6 V 1 A voltage drop
method)
COIL
Power
At Pickup Voltage
(typical)
192 mW (single side stable, 2 coil latching)
96 mW (1 coil latching)
Weight
NOTES
All values at 20°C (68°F).
Relay may pull in with less than “Must Operate” value.
Relay has fixed coil polarity.
For complete isolation between the relay’s magnetic fields, it is recom-
mended that a .197" (5.0 mm) space be provided between adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
1.
2.
3.
4.
Max. Continuous
Dissipation
Temperature Rise
Max. Temperature
0.75 W at 20°C (68°F) ambient
30°C (54°F) at nominal coil voltage
130°C (266°F) Class B, 155°C (311°F)
Class F
1/29/07W
LED Zone
京公网安备 11010802033920号
EEWORLD
