EEWORLDEEWORLDEEWORLD

Part Number

Search

cd4051

Description
CMOS Analog Multiplexers/Demultiplexers
File Size121KB,12 Pages
ManufacturerIntersil ( Renesas )
Websitehttp://www.intersil.com/cda/home/
Download Datasheet Compare View All

CD4051 Overview

CMOS Analog Multiplexers/Demultiplexers

CD4051BMS, CD4052BMS
CD4053BMS
December 1992
CMOS Analog
Multiplexers/Demultiplexers*
Description
CD4051BMS, CD4052BMS and CD4053BMS analog multi-
plexers/demultiplexers are digitally controlled analog
switches having low ON impedance and very low OFF leak-
age current. Control of analog signals up to 20V peak-to-
peak can be achieved by digital signal amplitudes of 4.5V to
20V (if VDD-VSS = 3V, a VDD-VEE of up to 13V can be con-
trolled; for VDD-VEE level differences above 13V, a VDD-
VSS of at least 4.5V is required). For example, if VDD =
+4.5V, VSS = 0, and VEE = -13.5V, analog signals from -
13.5V to +4.5V can be controlled by digital inputs of 0 to 5V.
These multiplexer circuits dissipate extremely low quiescent
power over the full VDD-VSS and VDD-VEE supply voltage
ranges, independent of the logic state of the control signals.
When a logic “1” is present at the inhibit input terminal all
channels are off.
The CD4051BMS is a single 8 channel multiplexer having
three binary control inputs, A, B, and C, and an inhibit input.
The three binary signals select 1 of 8 channels to be turned
on, and connect one of the 8 inputs to the output.
The CD4052BMS is a differential 4 channel multiplexer hav-
ing two binary control inputs, A and B, and an inhibit input.
The two binary input signals select 1 of 4 pairs of channels
to be turned on and connect the analog inputs to the out-
puts.
The CD4053BMS is a triple 2 channel multiplexer having
three separate digital control inputs, A, B, and C, and an
inhibit input. Each control input selects one of a pair of chan-
nels which are connected in a single pole double-throw con-
figuration.
The CD4051BMS, CD4052BMS and CD4053BMS are supplied
in these 16 lead outline packages:
Braze Seal DIP
Frit Seal DIP
Ceramic Flatpack
*CD4051B Only
*H4X
H1E
H6W
†CD4052B, CD4053 Only
†H4T
Features
• Logic Level Conversion
• High-Voltage Types (20V Rating)
• CD4051BMS Signal 8-Channel
• CD4052BMS Differential 4-Channel
• CD4053BMS Triple 2-Channel
• Wide Range of Digital and Analog Signal Levels:
- Digital 3V to 20V
- Analog to 20Vp-p
• Low ON Resistance: 125Ω (typ) Over 15Vp-p Signal
Input Range for VDD - VEE = 15V
• High OFF Resistance: Channel Leakage of
±100pA
(typ) at VDD - VEE = 18V
• Logic Level Conversion:
- Digital Addressing Signals of 3V to 20V (VDD - VSS
= 3V to 20V)
- Switch Analog Signals to 20Vp-p (VDD - VEE = 20V);
See Introductory Text
• Matched Switch Characteristics: RON = 5Ω (typ) for
VDD - VEE = 15V
• Very Low Quiescent Power Dissipation Under All Digi-
tal Control Input and Supply Conditions: 0.2µW (typ)
at VDD - VSS = VDD - VEE = 10V
• Binary Address Decoding on Chip
• 5V, 10V and 15V Parametric Ratings
• 100% Tested for Quiescent Current at 20V
• Maximum Input Current of 1µA at 18V Over Full Pack-
age Temperature Range; 100nA at 18V and +25
o
C
• Break-Before-Making Switching Eliminates Channel
Overlap
Applications
• Analog and Digital Multiplexing and Demultiplexing
• A/D and D/A Conversion
• Signal Gating
* When these devices are used as demultiplexers the “CHANNEL
IN/OUT” terminals are the outputs and the “COMMON OUT/IN” ter-
minals are the inputs.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
File Number
3316
7-937

CD4051 Related Products

CD4051 CD4051BMS CD4052BMS CD4053BMS
Description CMOS Analog Multiplexers/Demultiplexers CMOS Analog Multiplexers/Demultiplexers CMOS Analog Multiplexers/Demultiplexers CMOS Analog Multiplexers/Demultiplexers
Rare experience in power supply design!
For an electronic system now, the design of the power supply part is becoming more and more important. I would like to discuss with you some of my own experience in power supply design to start a disc...
3344520 Power technology
Solution to the problem that the I2C bus of MSP430 LaunchPad cannot be simulated
[size=6][color=#ff0000]It is best to remove the short-circuit cap of the P1.6-LED lamp on the board. If you do not remove it, it will have an impact. Personal test[/color][/size]...
qinkaiabc Microcontroller MCU
About the timer A problem of 430
The book says that in the continuous counting mode of timer A, the counter counts from 0 to FFFFH, then returns to 0 and counts again. It can also increase the value of CCR0 in the interrupt, and outp...
364147694 Microcontroller MCU
Some important industry exhibitions and seminars held in Beijing in November 2012
TI Medical Electronics Development Technology Forum (Beijing) Location: Yongtai Banquet Hall A, Four Points by Sheraton Beijing Haidian Yongtai Hotel (Building 1, No. 25 Yuanda Road, Haidian District,...
jameswangsynnex Industrial Control Electronics
Conversation between a cheating woman and a monk late at night
Repost: It does make sense, though not absolutely. [color=#333333][backcolor=rgb(245, 245, 245)][font=Helvetica, Tahoma, Arial, sans-serif]Late at night, there was a woman and a monk in the temple. Th...
wangfuchong Talking

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 2152  1757  2247  984  1341  44  36  46  20  27 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号