I have a question, why do I find that the waveforms simulated by modelsim6.2 and modelsim6.5 are different? Which version of modelsim do you usually use?...
I am developing the code for burning UBOOT to NANDFLASH. The hardware environment is I DAVINCI development platform. Software environment: montavista linux. Bootloader: UBOOT-1.1.3. Integrated develop...
[i=s]This post was last edited by qwqwqw2088 on 2022-10-25 09:56[/i]In recent years, a series of outdoor sports such as camping, picnics, and wild fishing have quickly become popular. From a niche hob...
Does anyone have the e-books of "Digital System Design and VHDL" 2nd edition published by Electronic Industry Press and "Modern Electronic Technology: VHDL Digital System Design"?...
[size=4][color=#000000]Phenomenon: After a wireless network card is powered on, without any operation, the four PAs will emit a lot of heat, and the surface temperature of the PA is very high and hot....
I define a pin as output. If there is a signal input, then I check the input register of the pin to see if it is the input signal?
Because IIC communication is realized with ordinary IO port, this res...
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
Google's driverless technology is not only an eye-catching technology, but also a subversion of the car usage model.
Those who have watched anti-terrorism films and TV dramas must have been im...[Details]
Remote keyless entry (RKE) systems have become popular with users, with more than 80% of new cars in North America and more than 70% in Europe equipped with RKE systems. In addition to the obvious ...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
No matter which processor you are learning, the first thing you need to understand is the registers and working mode of the processor.
ARM has 37 registers, including 31 general registers and ...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
I. Introduction
In the field of power conversion, isolated converters (forward, flyback, and double-ended) with low output DC voltage all use MOSFET as the rectifier device. Since these devi...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
Aromatic gases are widely present in food, medicine, cosmetics and various daily chemical products, such as snacks, liquor, spices, Chinese herbal medicines, plasters, perfumes, soaps, shampoos, et...[Details]
1. System Structure
This system is a simulation system of indoor air-conditioning temperature/humidity control system. The data acquisition and control center collects temperature/humidity...[Details]
Overview
As a remote network communication control method with advanced technology, high reliability, complete functions and reasonable cost, CAN-bus has been widely used in various automa...[Details]
Overview
In spectral measurement, photomultiplier tubes (PMT) and charge-coupled devices (CCD) are often used as photoelectric converters. PMT is used in slow-changing, high-precision spectral...[Details]
Abstract: Aiming at the needs of coal-rock acoustic emission signal monitoring system, a data acquisition circuit with 24-bit resolution and 16-channel synchronous data acquisition function is desi...[Details]